BlueStar BSP36INDCKTPLT Installation Manual
INSTALLATION MANUAL
Induction Cooktop
750165
Fitting and Installing
Do not change or alter the appliance.
Do not use any extension cable to connect it.
The appliance is not intended to be operated by means of external timer or separate
remote control system.
The installation and connecting of the appliance must be done by approved specialists.
The manufacturer cannot be responsible for damage caused by installation or
connecting errors.
To be used, the appliance must be well-equipped and installed in a kitchen unit and an
adapted and approved work surface.
This domestic appliance is exclusively for the cooking of food, to the exclusion of any
other domestic, commercial or industrial use.
The cabinetry or the support in which the cooktop is to be fitted, as well as the edges of
cabinet, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 212° F / 100° C.
The strips on the wall edges need to be heat-resistant.
If a drawer is placed under the unit, avoid putting flammable objects in this drawer (e.g.
sprays) or non-heat-resistant objects.
Materials which are often used to make countertops expand on contact with water. To
protect the cut-out edge, apply a coat of varnish or special sealant. It is recommended to
apply an adhesive joint around the cooktop to prevent any leakage into the supporting
cabinetry. The gasket guarantees a correct seal when used in conjunction with smooth
worktop surfaces.
The space between the cooktop and the range hood placed above must respect the
specifications of the hood manufacturer.
The connection cable cannot be subjected to mechanical constraint (e.g. a drawer) after
construction.
Use only cooktop guards designed by the manufacturer of the cooking
appliance or indicated by the manufacturer of the appliance in the
instructions for use as suitable or cooktop guards incorporated in the
appliance. The use of inappropriate guards can cause accidents.
Steam may damage electronic appliances. The appliance cannot
be installed or used above a dishwasher or a dryer or a nonventilated oven.
2
Nameplate Location
The appliance’s product identification tag is located underneath the appliance, as shown
below. The serial number of your appliance can be found on that label. Write down this
number and keep it with the Use & Care manual.
3
Loading...