BLUESHAPE CVTR1M User Manual
CVTR1M single channel portable charger
Instruction Manual
Rev 2.0
www.blueshape.net
The user is being alerted of the importance of going through the literature
accompanying this product and getting familiarised with the important safety and
operating instructions included.
Please follow the safety instructions below and keep them handy for quick reference:
§ Protect the equipment from humid environments. Avoid any contact with water or other fluids. Do not use if any liquid has been
accidentally spilled over the equipment.
§ Avoid touching the contact terminals.
§ Unplug when not in use and avoid power surges or unstable AC sources.
§ Avoid setting up near heat sources such as fireplaces, radiators, stoves or other heat generating equipment.
§ To prolong lifetime, avoid usage in overheated environments.
§ Use only, to charge BLUESHAPE or third party V-lock batteries.
§ Contact qualified service personnel for inspection or repair.
§ Do not remove cover or dismantle the charger. There are no user-serviceable parts inside.
Note:
The equipment may become rather hot during operation. This is not a sign of malfunction. This is to be expected due to
the high power handling of the device in such a small volume.
Introduction
The CVTR1M has been designed as a handy, portable Vlock charger to simplify battery charging and ensure quick
availability whenever required. It is safe, compact, light and
stand-alone and can easily be taken anywhere without
much inconvenience. Nevertheless, It still features quick
charging capability @ 3A in constant current mode. Precharge feature is also included.
This equipment is contained in a stylish but robust
Cordura® bag.
Features
• Elegant and convenient-perfect for transportability and
for having a readily available charging apparatus at any
time and place when needed
§ Charging unit with constant current and constant
voltage charging profiles
§ Pre-charge feature for deeply discharged battery
protection included in the charger operation
§ Rapid time to charge. A BLUESHAPE BV100 can be
fully charged within 3 hours.
§ Short circuit and overload internal protection
§ High quality V-plate adapter base
§ Lightweight and compact
Note:
This equipment is not an intelligent charger and does not communicate
with BLUESHAPE BSCVMON software
Main specifications
Input Voltage
Charge indication
Output Voltage
Output Current
Operating Temp.
Dimensions
Weight
100 - 240V AC, 47-63Hz
Single LED display system
DC 16.8V (+/- 0.8%)
Max 3A in CC
5°C + 45°C
80 x 180 x 190mm (all inclusive)
1000g
CVTR1M single channel portable charger
for any return of defective product. It is important that the buyer provides us with as much information as possible about the failure being claimed. In the event of product failure for which
from warranty statements other than those contained in this declaration. This warranty is not transferable and is only applicable to the original buyer. In all warranty claims, the buyer must
Instruction Manual
Rev 2.0
www.blueshape.net
LED indication
1 Steady green On switch on
2 Steady red
3 Steady green Charge ready
Note:
The charger's constant voltage phase continues indefinitely
to a very low taper. It is therefore normal to see a
BLUESHAPE battery with all LEDs continuing to light up
even after charge has been completed (with the battery still
connected to the charger). However, the user is alerted and
can consider the battery as fully charged when there is a
change in the LED colour from red to green.
Package contents
• Charger unit directly connected to V-lock charging base
• Eu-Schuko power cord included as standard
• User operating manual
(Note: US power cord supplied for USA sales)
Constant current followed by
constant voltage charge
Warranty
BLUESHAPE products are warranted to be free from defects in materials, workmanship and functionality for a period of 18 months commencing from the date of purchase. This warranty shall
not apply to any products or parts of, that have been subjected to misuse, negligence, accidental or abnormal conditions of operation. The buyer should always contact the place of purchase
warranty applies, we will repair or replace the product free of charge. In these cases, all expenses including transport charges will be borne by us. In the case where the failure has been
caused by one of the causes explained above, repairs would be billed at a nominal cost. Prior to the carrying out of any repairs, we will inform the customer of the estimated costs of these
repairs. These warranty conditions are the only ones applicable to our products and overrule any other expressed or implied warranties. We shall not be held liable for any damages resulting
reproduce the original purchase invoice.
Loading...