BLUESHAPE CVS8XW User Manual
INTELLIGENT BATTERY CHARGER
FOR V-LOCK LITHIUM ION BATTERIES ONLY
Model
CVS8XW – Wall Mount
OPERATING INSTRUCTIONS
Revision 1.0
www.blueshape.net Printed in Malta 2010
Please read these instructions concerning your safety
BLUESHAPE lithium-ion battery chargers have been designed to
provide a superior performance by managing relatively high currents
during their operation in order to reduce charging time.
As may be expected, the chargers become warm during operation
and it is therefore very important to keep their ventilation openings
unobstructed.
Moreover, please follow the safety instructions below.
- Protect the equipment from humid environments. Avoid any
contact with water or other fluids. Do not use if any liquid has
been accidentally spilled inside the equipment .Contact qualified
service personnel for inspection or repair
- Clean only by using a dry cloth
- Unplug when not in use and avoid power surges
- Read the supplied instructions thoroughly and keep handy
- Avoid setting up near heat sources such as fire places, radiators,
stoves or other heat generating equipment
- NEVER use without proper grounding
- Protect the AC mains power plug, connector and cord
- If the equipment develops a fault, have it repaired by qualified
service personnel only
- NEVER block the ventilation openings or obstruct cooling fan air
flow
- Use only as instructed by the manufacturer
- Do not remove cover or dismantle the apparatus. No userserviceable parts inside
WARNING
THIS EQUIPMENT MUST BE EARTHED
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE
TO AVOID ELECTRIC SHOCK, DO NOT OPEN THE
2
APPARATUS AND ALWAYS REFER ANY SERVICING TO
QUALIFIED PERSONNEL
The user is being alerted of the importance of
going through the literature accompanying this
product and familiarising himself with the
important safety and operating instructions,
included.
BLUESHAPE CHARGERS ARE INTENDED FOR OPERATION
WITH LINE VOLTAGES BETWEEN 100V AND 240V AC AND LINE
FREQUENCIES BETWEEN 43Hz AND 60 Hz
The equipment is being supplied with a compatible AC mains power
cord. In the case when the UK plug is fitted, this plug is equipped with
a 13A replaceable fuse.
Package contents
- CVS8XW simultaneous eight position charger
- Wall hanging bracket
- AC power cord
- Safety operating instructions
- USB data cable
- CD-ROM with BSCVMon software
3
CVS8XW graphic description – Front view
5
4 76
1 3
1. Upper Bank-A (channels from #1 to #4)
2. Battery charging bays
3. Battery LED indicators (see page 15 for explanation)
4. LCD display
5. LCD keys
6. AUX output LED indicator (see page 16 for explanation)
7. AUX output connector (13.8V 110W)
4
8. Mains switch
9. Lower Bank-B (channels from #5 to #8)
2
9
8
CVS8XW graphic description – Side View
2
1
7
5
6
3
4
1. Carrying handle
2. Supporting lateral studs
3. Wall mount bracket (see page 6 for explanation)
4. Ventilation inlets
5. Data connector
6. AC Mains input, 100V-240V
7. Ventilation outlets
5
Installation
This charger is designed to ideally be installed on a wall.
We suggest you identify a favourable site, where the charger can be
located allowing easy access and at the same time keeping the
ventilation inlets free from obstruction:
- proceed with the mounting bracket first:
- put the bracket against the wall, and mark the 4 holes
- screws and/or fittings are not included: choose proper screws or
fittings to fix the bracket to the wall that are specially suited to the
material in your wall and have sufficient holding power
- fix the bracket firmly tightening all the 4 screws
- lift the charger and align the 4 lateral golden studs with the
corresponding slots on the mounting bracket
6
Loading...