BLUESHAPE CVS4X User Manual
INTELLIGENT BATTERY CHARGER
FOR V-LOCK LITHIUM ION BATTERIES ONLY
Model
CVS4X
OPERATING INSTRUCTIONS
Revision 1.0
www.blueshape.net Printed in Malta 2009
Please read these instructions concerning your safety
BLUESHAPE lithium-ion battery chargers have been designed to
provide a superior performance by managing relatively high currents
during their operation in order to reduce charging time.
As may be expected, the chargers become warm during operation
and it is therefore very important to keep their ventilation openings
unobstructed.
Moreover, please follow the safety instructions below.
- Protect the equipment from humid environments. Avoid any
contact with water or other fluids. Do not use if any liquid has
been accidentally spilled inside the equipment .Contact
qualified service personnel for inspection or repair
- Clean only by using a dry cloth
- Unplug when not in use and avoid power surges
- Read the supplied instructions thoroughly and keep handy
- Avoid setting up near heat sources such as fire places,
radiators, stoves or other heat generating equipment
- NEVER use without proper grounding
- Protect the AC mains power plug, connector and cord
- If the equipment develops a fault, have it repaired by qualified
service personnel only
- NEVER block the ventilation openings or obstruct cooling fan
air flow
- Use only as instructed by the manufacturer
- Do not remove cover or dismantle the apparatus. No userserviceable parts inside
WARNING
THIS EQUIPMENT MUST BE EARTHED
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE
TO AVOID ELECTRIC SHOCK, DO NOT OPEN THE
2
APPARATUS AND ALWAYS REFER ANY SERVICING TO
QUALIFIED PERSONNEL
The user is being alerted of the importance of
going through the literature accompanying this
product and familiarising himself with the
important safety and operating instructions,
included.
BLUESHAPE CHARGERS ARE INTENDED FOR OPERATION
WITH LINE VOLTAGES BETWEEN 100V AND 240V AC AND
LINE FREQUENCIES BETWEEN 43Hz AND 60 Hz
The equipment is being supplied with a compatible AC mains power
cord. In the case when the UK plug is fitted, this plug is equipped
with a 13A replaceable fuse.
Package contents
- CVS4X simultaneous four position charger
- AC power cord
- Safety operating instructions
- USB data cable
- CD-ROM with BSCVMon software
3
CVS4X graphic description – Front/right side
3
2
1
1. Battery LED indicators (see page 11 for explanation)
2. AUX output LED indicator (see page 12 for explanation)
3. Carrying handle
4. Ventilation inlets
5. Release buttons
6. Battery #3 and #4 charging bays (Battery #1 and #2 charging
bays are on the opposite side)
4
5
6
4
CVS4X graphic description – Rear/left side
3
2
1
8
7
1. Ventilation outlets
2. Data connector
3. AUX output connector (13.8V 110W)
4. Ventilation inlets
5. Release buttons
6. Battery #1 and #2 charging bays (Battery #3 and #4 charging
bay are on the opposite side)
7. AC Mains input, 100V-240V
8. Mains switch
4
5
6
5
Loading...