Blueridge OSK102, WFWM User Manual

User Manual for WiFi Module

For Controlling WiFi Compatible Wall-Mounted

BLURIDGE Ductless Mini-Split HVAC Equipment

Applies to model WiFi Module # WFWM

Document Version July 2018

Effort has been made to insure compatibility of this device with standard home networking equipment and with
iOS and Android operating systems. However, due to the variety of hardware and software found in home
networks, compatibility is not assured with your particular network. Please read the manual carefully before
installing or connecting your WFWM WiFi adapter. (It is recommended to save a copy of these instructions for
future reference.)

Page 1 of 15

AVOID FRUSTRATION - READ THIS

WHOA!

When setting up this device, you may think it is broken when it is not. Why? Because if the

power is turned on to the mini-split equipment either for the first time, or by powering it off
then on again to resolve a network or other setup issue, the equipment and related software
will not operate for a minimum of 15 minutes. This includes the setup process for the app also
not working for at least 15 minutes. The reason is because this mini-split equipment (as with
most air conditioners) has a delay timer that is intended to keep the equipment from quickly
starting after stopping, which could damage the condenser. And so it has been designed to
prevent power to the equipment and software for the duration of this delay period. If you
attempt to setup or use the app during this delay period, it will not function properly.
Understanding this then, after the equipment is powered on, you must wait at least 15
minutes before operating the WiFi module or the app on your mobile device.

Table of Contents

1. Specifications

2. Compatibility

3. Download and Install the App

4. Install the WiFi Module

5. Getting connected

6. Using the App

7. Troubleshooting

Page 2 of 15

1. Specifications

Model: WFWM (OSK102)
Standard: IEEE 802.11b/g/n
Antenna Type: External omnidirectional Antenna
Frequency: WIFI – 2.4G
Maximum Transmitted Power: 15 dBm Max
Operation Temperature: 32 Deg F ~ 133 Deg F
Operation Humidity: 10% - 85%
Power Input: DC 5V/300mA

2. Compatibility

The WFWM is designed for compatibility with devices using Android or iOS operating systems.

Note: Due to the frequency of OS updates, the app may not be compatible with the iOS and
Android versions that are released after the manufacture of this device and software. It
probably will be compatible, but it’s uncertain what future OS updates may contain.

Note: The WFWM hardware device supports WPA-PSK/WPA2-PSK encryption and no
encryption. WPA-PSK/WPA2-PSK encryption is recommended.

3. Download and Install the App

Search the App Store (iOS) or Google Play Store (Android) for Nethome Plus, download and
install.

If you prefer, you can scan the appropriate QR code below using the camera (iOS) or QR code
reader software (Android) to take you directly to the compatible app for your device.
Download and Install.

Page 3 of 15

Nethome Plus for Android

Nethome Plus for iOS

Note! These QR codes are only to get Nethome Plus onto your iOS or Android device. Please

do not confuse these for the QR code on the WiFi adapter, used for setup later.

4. Install the WFWM WiFi module

• Remove the protective cap of the WFWM WiFi module

Page 4 of 15

• Open the lid of your air handler and insert the WiFi adapter as shown. You should feel it

click into place.

Note: The WFWM WiFi box contains a QR code sticker to assist in setup. We suggest
you apply it to the side of the air hander as shown.

5. Register

Make sure that WiFi is enabled on your Android or iOS device and that it is on your
preferred (home) network.

Page 5 of 15