VXi BlueParrott®
Point
TM
User Guide
VXi BlueParrott® PointTM User Guide PAGE 2
TABLE OF CONTENTS
Safety Information .............................................3
Package Contents ..............................................4
Glossary of Terms ..............................................5
Headset Overview ..............................................6
Charging the Headset ........................................7
• Battery Power Indicators
• Operation While Using the Charger/Adapter
Getting Started ..................................................9
• On/Off/Standby
• Pairing with a Phone
– NFC (One-Touch) Pairing
– Regular Pairing
• Wearing and Adjusting the Point
• Making/Taking Calls
Advanced Features and Functions ....................14
• Multiple Device Pairing
• Multipoint Mode
• Additional Features and Functions
– Last Number Redial
– Call Waiting/Rejecting a Call
– Rejecting a Call
– Phone Voice Control (e.g. Siri® or Google NowTM)
– Muting
– Transferring Audio
– Turning Headset Indicator Lights On/Off
• Resetting Headset Paired Devices List
Functions & Indicators Table ............................18
VXi BlueParrott® PointTM User Guide PAGE 3
IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid
injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices sound
muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s possible for
your ears to adapt to volume that is too high, and this could result in permanent hearing damage without
any noticeable discomfort.
• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.
• Use only the power cords included with this product.
• Avoid temperatures exceeding 140° F (will cause equipment failure).
SAFETY INFORMATION
VXi BlueParrott® PointTM User Guide PAGE 4
PACKAGE CONTENTS
1. BlueParrott® PointTM Headset
2. Choice of Ear Buds
(multiple sizes)
3. Choice of Ear Hooks
(multiple sizes)
4. USB Charging Cable
5. Quick-Start Guide*
6. Warranty and Compliance Insert*
*Not pictured.
2
1
Images are not shown to scale.
4
3
VXi BlueParrott® PointTM User Guide PAGE 5
GLOSSARY OF TERMS
• On: Headset is on, but there is no connection to the phone (red light will flash).
• MFB: Abbreviation for “Multifunction Button.”
• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.
• Paired: Two Bluetooth devices agree to communicate with one another.
• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call
(blue light will flash).
• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call
(blue light will flash).
VXi BlueParrott® PointTM User Guide PAGE 6
HEADSET OVERVIEW
A. Volume Up/Mute
B. Volume Down
C. Microphone Boom
D. On/Off Switch
E. Indicator Lights
F. Multifunction Button (MFB)
G. NFC Zone (pictured below)
A
B
E
F
D
G
C
NFC Zone
VXi BlueParrott® PointTM User Guide PAGE 7
CHARGING THE HEADSET
Connect the USB charger cord into the headset’s
USB charging port. If the headset is
not fully
charged, the indicator will turn red. When the
indicator turns blue and
stays blue, the unit is
fully charged. A
fully discharged battery will
need approximately 1.5 hours to achieve a
complete charge.
Battery Power Indicators
While charging, the indicator light shows
the level of battery power on your Point
as follows:
Blue light: Fully charged. Over 6 hours’
talk time.
Red light: Less than a full charge.
For best performance, keep charging
the headset when not in use.
NFC Zone
Headset Charging Port
Indicator Light Location
VXi BlueParrott® PointTM User Guide PAGE 8
CHARGING THE HEADSET (continued)
Operation While Using the Charger/Adapter
The Point headset should be operated from battery power only. If you connect the headset to a charger
while it is turned on, it will reset and shut off. To turn it back on again, first unplug the headset from the USB
charging cord, slide the switch to the “off” position (if not already done), then back to the “on” position.
NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back
to the phone.
Loading...