Blue Ox SC9012 User Manual

®

OverBilt® SportLoader

TM

Installation Instructions

Service Support Stand

®

e SportLoader Service Support Stand is a versatile tool allowing you to service, wash or detail your
motorcycle at a comfortable height. Rather than having to bend over to work on the bike, you simply
place the ramp extensions on the SportLoader, secure the stand under the end and run the bike out of the
pickup. e Service Support Stand secures the SportLoader in the horizontal position, making service or
detailing easy.

Unpacking your SportLoader Service Support Stand

Remove the SportLoader Service Stand from the shipping carton, referencing the parts list below.
Verify you have all of the parts BEFORE you start the installation process. If you do NOT have all the
components, please contact a Blue Ox dealer or distributor. You can also contact a member of Blue Ox’s
24/7 Customer Care Team at [phone] or toll free at [phone] to order replacement parts.

Parts List

5

4

Ref. # Part # Qty. Description

1 61-6181 1 Weldment, Support Stand Base
2 61-6182 1 Weldment, Support Stand Adjustor
3 229-0440 1 Spring Lock Pin, 5/16” x 2 1/2” EF
4 84-0001 1 Quick Pin Assembly
5 229-0520 1 Pin, 1/2” x 2 5/8”

2

WARNING:

USE ONLY GENUINE FACTORY REPLACEMENT PARTS.

Do NOT substitute homemade or non-typical parts. This may

3

1

cause your support stand to fail and result in injury or death.

If repairs of parts or components of your support stand are
needed, you may order them through your nearest Blue Ox®
dealer or distributor, or call our 24/7 Customer Care Team at

[phone] or toll free at [phone].

Page 1 of 2

Assembly and Use

1. To assemble the SportLoader Service Support
Stand, remove the spring lock pin from the
Service Support Stand base, slide the Service
Support Stand adjustor into the Service
Support Stand base.

2. With the ramp extensions already installed
on the SportLoader, slide the Service Support
Stand under the end ramp extension.

3. To secure the Service Support Stand, insert
the ½-inch pin through the SportLoader and
Service Support Stand. Finish by placing clip
through the bottom of the quick pin.

4. Extend the Service Support Stand to the
appropriate height, the base needs to be
perpendicular to the SportLoader for stability.
Secure the Service Support Stand by placing
the spring lock pin in the assembled leg of the
stand.

At Blue Ox® we pride ourselves in offering

exceptional customer service to our valued

customers.

If you have any questions, comments, or

concerns please feel free to contact a member of

our 24/7 Customer Care Team by calling

[phone] or toll free at [phone].

®

BLUE OX

Customer Service Commitment

Blue Ox® is focused on providing exemplary customer

service, as observed in our mission statement and

guiding principles. In accordance with this objective,

Blue Ox is proud to provide services such as repairs and

general maintenance of Blue Ox products at over 150

RV Rallies. Look for our Destination America or Blue

Ox Racing service crews at the next rally or NASCAR

race that you attend. If you were not present, you will

find an informative, personalized note explaining any

services that may have been performed to

your Blue Ox products.

!

Do not use the SportLoader Service Support

Stand without all security pins in place. Failing

to do so could result in personal injury, product

CAUTION

or property damage.

Blue Ox also offers educational seminars at rallies and
through our Parks and Resort teams. In addition, Blue
Ox customers visiting our factory may take advantage

of the well-equipped Blue Ox RV park at no charge to

you, our valued and appreciated customer.

© 2005 Blue Ox

One Mill Road, Industrial Park

Pender, Nebraska 68047

Phone: [phone]

Toll Free: [phone]

Fax: [phone]

www.blueox.us

292-2784

Page 2 of 2