Blue Ox DH9000 User Manual
DH9000
Diamond Hitch Companion Shank Kit
Installation Instructions
Fits B&W Companion Fifth Wheel Hitch Models RVK3500 & RVK3400
to Blue Ox® Diamond Hitch
1. Remove the existing ball by pushing in
the locking tab and then lift and rotate the
ball assembly counterclockwise. Continue
rotating and lifting until the ball stud clears
the receiver cylinder.
3. Twist the shank 30 degrees clockwise
while lifting slightly until ball drops into
position and locking tab snaps in place.
Install the hitch onto the shank per
manufacturer’s specications.
2. Align pin of the ball housing (gray)
with the slot in shank (white). Drop into
receiver cylinder and depress locking tab.
Front of Vehicle
405-0256 Rev A Page 1 of 2 11/6/13
DH9000
Diamond Hitch Companion Shank Kit
Installation Instructions
CUSTOMER SERVICE COMMITMENT
Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime
with our products. Our team is here to assist you with any questions you may have regarding the
performance of your product. Simply call (402) 385-3051 and you can speak with our customer care
team.
Additionally, please visit our website to see which rallies our Destination America team will be
attending. For a nominal fee, our service technician will service your towing system to ensure it’s in
proper working condition. Also, as a commitment to our customers, should you visit our factory, you
can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.
Again, thank you for being our customer and for the condence you have shown in the performance
of our products. It is because of customers like you we enjoy the success we have today.
One Mill Road, Industrial Park
Pender, Nebraska 68047
© 2013 Blue Ox
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.com
405-0256 Rev A Page 2 of 2 11/6/13
Loading...