Page 1
Quick Start Guide
g
Inside the box
One Bluetooth Headset.
One X3 micro User Guide.
One Quick Start Guide.
One USB charging cable.
One car lighter adapter for USB charging cable.
One AC wall charger
One soft gel earbud cover
One foam earbud cover
One removable ear-hook.
Quick Start Guide
Pairing the Headset to a Mobile Phone
1. Charge the X3 micro for at least 4 hours before use. Reboot the mobile phone.
2. Long Press the MFB
(The X3 may go straight into Pairing mode and not require the next step,
LED flashes Red to Blue)
3. Long press Vol
4. Turn Bluetooth ON in your phone.
5. Perform a device discovery to search for the X3 micro.
6. When devices are displayed, select the X3 micro. Enter Passkey “1234”.
7. Set the X3 micro as a trusted/authorised device, if optional in your phone.
(Multi-Function Button) to turn the X3 micro ON.
to enter Pairing mode. LED flashes Red to Blue.
Function / Button matrix
Function
Power on/off
Pair
Voice dial using the curr ent con nected pho ne when c onnected
Voice dial through the first paired phone when not connected
Cancel voice dialing
Cancel last call redial
Answer a call
End a call
Voice dial through the second paired phone when not connected
Voice dial through t he third pa ired ph one when n ot conne cted
Turn on/off LED lights (disconnect from phone first)
Reject a call
Volume up
Volume down
Mute / Unmute the microphone
Reset (deletes all stored pairing information)
Last call redial using the current connected phone when connected
Last call redial using the first paired phone when not conn ected
Disconnect the Bluetooth connection to the current phone
Audio transfer from the headset to your phone
8. Short press the MFB
once to connect to your phone.
Voice dialing will be activated if it is enabled in your phone.
To cancel voice dialing, short press the MFB
.
9. For X3 operations refer to Function / Button Matrix below.
To pair up to 2 more devices; phones, smartphones, pda’s or computers
1.
Short press the MFB
2. R
epeat steps 5 – 8 for each device you want to pair.
and Vol together to disconnect the current phone.
3. See Multi Connect Call Switching below.
Button
long press for 3 seconds
long press for 3 seconds
short press 1 time
short press 2 times
short press 3 times
short press 5 times
long press for 3 seconds
long press for 3 seconds
short press 1 time
short press 1 time
short press 1 time
short press 1 time
short press 1 time
Reconnectin
Once the Headset has been disconnected (by switching off
or going out of range) you will need to reconnect by:
1. Short pressing the MFB
Once for the first paired phone
Twice for the second paire d phone
Three times for the third paired phone.
2. Voice dialing will be activated if enabled in phone
To cancel voice dialing
Multi Connect Call Switching
To disconnect from the currently connected phone and
switch to another:
1. Short press the MFB and Vol together
2. Short press the MFB
Once for the first paired phone
Twice for the second paire d phone
Three times for the third paired phone.
the Headset
S
hort press the MFB
–
Page 2
r
BlueAnt X3 micro Quick Start Guide
Charts
Headset overview
LED Indicator Chart
Headset State
Power on
Power off
Pairing mode
Reset
Standby mode
Sniff mode
Incoming call
Talking
Charging
Charging complete
Voice dialing
Mute
Low battery
LED Indication
Blue i
ndicator blinks twice
Red i
ndicator blinks twice
Red & Blue indicator alternates.
Purple indicator blinks twice and then Blue & R ed indic ators alternat e.
Blue indicator blinks once every 4 seconds
Blue indicator rapidly blinks twice every 4 seconds
Purple indicator blinks once per second
Blue indicator rapidly blinks 3 times every 4 seconds
Red indicator on
Red indicator off
Blue indicator blinks once per second
Red indicator blinks once per second
Red indicator rapidly blinks twice every 5 seconds
1 Indicator LED
2 Multi Function Button (MFB)
3 Volume Control + 4 Removable Ear Hook
5 Speaker
6 Microphone
7 Charging Port
Audio indicato
Power on
Power off
Pairing success
Volume adjustment
Incoming call
Mute
Low battery warning
Long press
Short press
Ascending melody
Descending melody
Pairing success mel od y
S
hort beep. When the maximum vol ume has been achieved a
long beep tone will sound .
Mobile phone ring tone or Headset default ring tone - depends
on the mobile phone in use.
Short beep tone
Low battery tone
Long beep tone
Short beep tone
chart
Loading...