Page 1
Quick Start Guide
1
2 3
First Time Turn ON
and Pairing
BlueAnt
Press the green button until
the LED will blinks red/blue.
Confirm language selection by
pressing the green button as
soon as your language is
spoken on the SUPERTOOTH 3.
BlueAnt
4A 4B
In case your phone doesn’t support automatic
transfer (dont press the red key of your
SUPERTOOTH 3), go to your phones
BlueAnt
Phonebook transfer will be initiated. Accept any
connection request on your phone if prompted.
Then wait until SUPERTOOTH 3 says:
“BlueAnt ST3 ready, connected to phone.”
“Contact Menu”, then select:
1) OPTION
2) Mark all
3) Option
4) Send or Send Business card
5) Via Bluetooth
6) Select BlueAnt ST3
Note: Blackberry and Smart phone owners please refer to
section F of user guide.
The SUPERTOOTH 3 will then
ask you to pair your phone.
On your phone bluetooth
menu, search for
devices and select
BlueAnt ST3 then enter
0000 as pincode.
if available
BlueAnt
5A
“Voice Answer
Enabled”
Activation of Voice Answer:
Press VOL + for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
5B
Deactivation of Voice Answer:
“Voice Answer
Disabled”
BlueAntBlueAnt
NOTE: Voice activation or deactivation is possible only if you’re not on call.
6 7
Manual Answer
BlueAnt
Press the green button
to answer incoming call.
End / Reject Call
Press the red button
to end or reject a call.
8
Voice Answer (if option is activated)
“Call from John. (BEEP)”
BlueAnt
“OK”
After the BEEP, say clearly
one of the words below:
“ACCEPT CALL”
“ACCEPT”
“ANSWER”
“OK”
Press VOL - for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
BlueAnt
IMPORTANT: Voice answer will not work if you don’t wait for the BEEP.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license.
www.blueantwireless.com
Page 2
Product Overview
Installation
Multi-Function Button
(on/off, pairing, answer,
voice dial, redial, etc.)
BlueAnt
Speaker
Volume
Down
Indicator
Volume
Up
Bluetooth
Indicator
End/Reject Button
(end/reject call,
reload phoebook)
MicrophoneCharge
Charger
Port
Fix the metal clip of the
SUPERTOOTH 3 to the
sun-visor
Other Functions
Turn ON
Increase Volume
BlueAnt BlueAnt
Attach the magnetic back of
the SUPERTOOTH 3 to the
fixed metal clip
Press the green button
for 1 second to turn ON.
Decrease Volume
Turn OFF
BlueAntBlueAnt
The SUPERTOOTH
3 must be placed in such a way
that its microphone is directed to
the mouth of the user.
Press green button until
“SUPERTOOTH VOICE
Powering Down” is
announced.
Press repeatedly VOL + to
increase volume.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license.
Press repeatedly VOL - to
decrease volume.
www.blueantwireless.com
Loading...