Blueair Medical User Manual

BlueairMedical

User Guide

FEATURING

HEPASILENTª

TECHNOLOGY

THANK YOU FOR CHOOSING BLUEAIR

Rea dy to start breathing cleaner air? First, read this User Guide to ensure

that you use the Bluea i r Medical safely and effectively . Then plug it in, turn it

on and breathe . Don t hear anythi n g? Check the blue power on l ight.

Blueair is so quiet, you may not realize it s on. But as the patented

Blu e air system remov e s dust, pollen , smoke, gases and odors from your

indoor environment, we think you ll notice the difference.

GENERAL SAFETY INSTRUCTIONS

The Blueair Medical is an electrical appliance. Before using it for the first time, please read these

safety instructions and take precautions to reduc e the risk of fire, electric shock and injury .

(A nd keep in mind the Limited Warranty applies only if the unit is used according to instructions.)

To reduce the risk of electric shock, the Blueair Medical will automatical ly turn off whe n the front

door is opened for cleaning and filter replacement. Additionally, the unit has a grounding type

plug (with a third pin) that will only fit a grounding typ e outlet. If the plug d oes not fit your outlet,

contact a licensed electrician to install a grounded outlet. Do not alter the plug in any way.

To avoid electric shoc k and fire hazards, plug the Blueair Medical directly into an app ropriate

electrical outlet (see voltage label on your unit) using the cable provided. The cable is

pac kaged beneath the unit.

Blueair Medical

Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause
electric shock or damage to the unit.

Never try to repair or adjust any of the electrical or mechanical functions on your Blueair Medical
yourself. Contact your local dealer or Blueair for service center information

.

Use only authorized Blueair filters.

USING YOUR BLUEAIR

Place the unit in a location that allows air to circulate freely in, out and around the unit.

Do not place the unit:

• Directly on or against soft furnishings (such as bedding or curtains).

• Near electronically sensitive devices such as a computer (within 6 /10cm).

• Near sources of heat (such as radiators, fireplaces or ovens).

• Near oxygen tanks or other combustible gases.

Do not let the Blueair come in contact with water. It is not designed for use outdoors or
in wet areas (such as bathrooms).

SETTINGS

When turning on the Blueair after the unit has been off, turn the speed control to level 4
for a few minutes of fast initial cleaning. Then adjust the control to the desired speed:

1. HEPASilent™ (for nighttime use)

2. Moderate fan speed (for daytime use)

3. Fast fan speed (for a large room)

4. Maximum operation (for fast initial cleaning or very polluted air)

For best results, run your Blueair Medical 24 hours a day, 7 days a week. Continuous operation
means you get a continuous supply of clean, filtered air circulating throughout the room.

Blueair Medical

How It Works

How It Works

Blueair Medical

Built-in carry handles

4-speed control knob (on side)

Blue “power on” light

Airflow output

Easy-to-change filter
– no tools required

Galvanized Swedish
steel housing

Ion brushes (no ozone generated)

Easy-to-vacuum ion chamber

Airflow intake

Power source and cord

Safety switch automatically turns
power off when door opens