Bloomfield 8730 Installation Manual

765

OWNERS MANUAL

for

COFFEE GRINDER

MODEL:

8730

Includes:

Installation

Operation

Use & Care

Servicing Instructions

Model 8730

Coffee Grinder

PRINTED IN UNITED STATES OF AMERICA

p/n 70385 Rev. A ECN-12617 M765 040212 cps

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD
INDUSTRIES is warranted against defects in materials and
workmanship for a period of one year from the date of original
installation or eighteen (18) months from the date of shipment
from our factory, whichever comes first, and is for the benefit
of the original purchaser, except that:
a. airpots carry a 30 day parts warranty only.
b. dispensers; i.e., tea and coffee carry a 90 days parts
warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN
LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY
EQUIPMENT MANUFACTURING CORPORATION SHALL
NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY
CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by
an Authorized Service Agency that the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God.

SERVICE POLICY AND PROCEDURE GUIDE

ADDITIONAL WARRANTY EXCLUSIONS

1. Resetting of safety thermostats, circuit breakers,
overload protectors, or fuse replacements unless
warranted conditions are the cause.

2. All problems due to operation at voltages other than
specified on equipment nameplates; conversion to
correct voltage must be the customer’s responsibility.

3. All problems due to electrical connections not made in
accordance with electrical code requirements and
wiring diagrams supplied with the equipment.

4. Replacement of items subject to normal wear, to include
such items as knobs and light bulbs. Normal maintenance

functions including adjustment of thermostats, microswitches,

and replacement of fuses and indicating lights are not

covered under warranty.

5. All problems due to inadequate water supply, such as

fluctuating, or high or low water pressure.

6. All problems due to mineral/calcium deposits, or

contamination from chlorides/chlorines. De-liming is
considered a preventative maintenance function and is
not covered by warranty.

It also does not apply if the serial nameplate has been
removed or unauthorized service personnel perform service.
The prices charged by Bloomfield Industries for its products
are based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of defects
without charge by a Bloomfield Industries Authorized Service
Agency or one of its sub-agencies. This service will be
provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest Authorized Service Agency,
transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific
limitations are shown below (Additional Warranty Exclusions).
Bloomfield Industries Authorized Service Agencies are located
in principal cities.

This warranty is valid in the United States and void elsewhere.
Please consult your classified telephone directory or your food
service equipment dealer; or, for information and other details
concerning warranty, write to:

Phone: [phone] Fax: [phone]

7. Full use, care and maintenance instructions are supplied
with each machine. Those miscellaneous adjustments
noted are customer responsibility. Proper attention will
prolong the life of the machine.

8. Travel mileage is limited to sixty (60) miles from an
authorized Service Agency or one of its sub-agencies.

9. All labor shall be performed during normal working hours.
Overtime premium shall be charged to the customer.

10. All genuine Bloomfield replacement parts are warranted
for ninety (90) days from date of purchase on non­ warranted equipment. Any use of non-genuine
Bloomfield parts completely voids any warranty.

11. Installation, labor and job check-out are not considered
warranty.

12. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technicians ability
to perform services are not covered by warranty.
This includes institutional and correctional facilities.

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory.
Upon acceptance of this shipment, the transportation
company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill
or express receipt, and that the note of loss or damage
is signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
must be done within fifteen (15) days from the date the
delivery was made to you. Be sure to retain the
container for inspection.

Bloomfield Industries cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.

xi

TABLE OF CONTENTS

WARRANTY STATEMENT xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION INSTRUCTIONS 4
OPERATION 6
CLEANING INSTRUCTIONS 7
SERVICING INSTRUCTIONS 8
WIRING DIAGRAMS 9
EXPLODED VIEW & PARTS LIST 10

SPECIFICATIONS

MODEL STYLE VOLTS WATTS

8730

Single Grinder

120 375 3.1 NEMA 5-15P

240 375 1.6 VARIOUS*

Thank You for purchasing this
Bloomfield Industries appliance.

Proper installation, professional
operation and consistent
maintenance of this appliance will
ensure that it gives you the very
best performance and a long,
economical service life.

This manual contains the
information needed to properly
install this appliance, and to use,
care for and maintain or repair the
appliance in a manner which will
ensure its optimum performance.

AMPS

1ø

POWER SUPPLY

CORD

* contact factory for specific application

APPLICABILITY

This manual applies to the following Bloomfield Industries products:
8730, with or without suffix

1

FEATURES AND OPERATING CONTROLS

Fig. 1 Model 8730 Features & Operating Controls

2

PRECAUTIONS AND GENERAL INFORMATION

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified
service personnel. Do not open any access panels which require the use of tools.

Failure to heed this warning can result in electrical shock.

WARNING: INJURY HAZARD

All installation procedures must be performed by qualified personnel with full knowledge of all
applicable electrical codes. Failure could result in property damage and personal injury.

This appliance is intended for commercial use only.

This appliance is intended for grinding coffee beans. No other
use is recommended or authorized by the manufacturer or its
agents.

This appliance is intended for use in commercial establishments,
where all operators are familiar with the appliance use,
limitations and associated hazards. Operating instructions and
warnings must be read and understood by all operators and
users.

Except as noted, this piece of equipment is made in the USA
and has American sizes on hardware. All metric conversions
are approximate and can vary in size.

The following trouble shooting, component views and parts lists
are included for general reference, and are intended for use by
qualified service personnel.

This manual should be considered a permanent part of this
appliance. The manual must remain with the appliance if it is
sold or moved to another location.

120V model of this grinder is listed under UL file E98380.

AGENCY LISTING INFORMATION

CAUTION:

EQUIPMENT DAMAGE

DO NOT plug in or energize this
appliance until all Installation
Instructions are read and followed.
Damage to the grinder will occur if
these instructions are not followed.

CAUTION:

CUT / PINCH HAZARD

DO NOT reach into the hopper

or discharge chute without first
unplugging the unit from electric
power.

3