Bloomfield 84571, 84572, 84575, 84574, 86606 Operation Manual

WELLS BLOOMFIELD, LLC

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: [phone]

fax: [phone]

www.wellsbloomfield.com

600

SERVICE INSTRUCTIONS

SOLENOID VALVE RETROFIT KIT NUMBERS

84571 84572 84575 84574

86606 86644 86650

Wrench p/n 86660 is designed to allow easy removal of
the braided faucet hose from the plastic solenoid valve.

FOR REMOVING BRAIDED HOSE:
IMPORTANT: Shut-off water supply to brewer before

removing faucet hose.

1. Slide the 7/16" end of the wrench between the valve
body and the white ring on the extreme end of the
metal hose fitting.

2. Pressure on the white ring toward the metal ferrule
releases the clinch ring, allowing the hose to be
easily slid off of the solenoid bypass outlet.

3. Reinstall hose by pressing end of hose onto bypass
outlet until it is fully seated.

FOR REMOVING FLARE FITTING

1. Slide the 5/8" end of the wrench over the flats on the
inlet fitting of the valve.

2. Hold the wrench to prevent the inlet fitting from
turning while installing or removing the inlet water
supply flare nut.

BRAIDED HOSE

7/16” for

5/8” for
VALVE FITTING

P/N 86660 BRAIDED HOSE WRENCH

WRENCH
#86660

BYPASS
OUTLET

WHITE
CLINCH
RING

WRENCH

METAL

VALV E

SLIDE WRENCH BETWEEN
VALVE AND CLINCH RING.
PRESS CLINCH RING TOWARD
METAL FITTING TO RELEASE.

PRINTED IN UNITED STATES OF AMERICA

p/n 76661 Rev. A ECN-13394 I 600 080211 cps

1 of 1

HOSE
FITTING

CLINCH RING