Read this manual prior to initial operation of the product!
Dear Customer,
We hope that your product, which has been manufactured in modern facilities and
passed through a strict quality control procedure, will give you very good results.
We advise you to read through this manual carefully before using your product and keep
it for future reference.
This User Manual will
• Help you use your machine in a fast and safe way.
• Read the User Manual before installing and starting your product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Please read all additional documents supplied with your product.
Remember that this User Manual is also applicable for several other models.
Explanation of symbols
Throughout this User Manual the following symbols are used:
A Important safety information. Warning for hazardous situations with regard to life
and property.
B Caution; Warning for supply voltage.
Caution; Warning for fire hazard.
Caution; Warning for hot surfaces.
Read the instructions.
C Useful information. Important information or useful hints about usage.
This appliance’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with
this label to indicate the used appliances that should not be mixed with other waste.
This way, the appliance recycling organised by your manufacturer will be done under
the best possible conditions, in compliance with European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used
appliance collection points closest to your home. We thank you doing your part to protect the
environment.
2
EN
2960310264_EN/190110.1543
1
1 Important safety information
This section includes safety information
that will help protection from risks of
personal injuries or materialistic damages.
Failure to follow these instructions
shall cause any warranty and reliability
commitment to become void.
General safety
• Never place the machine on a carpet-
covered floor, otherwise, lack of airflow
beneath the machine may cause
electrical parts to overheat. This will
cause problems with your machine.
• If the power cable or mains plug is
damaged, you must call Authorised
Service Agent for repair.
• The product should not be plugged
in during installation, maintenance
and repair works. Such works should
always be made by the technical
service. Manufacturer shall not be held
responsible for damages arising from
processes carried out by unauthorised
persons.
• Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
• Operate your product at temperatures
between +5°C and +35°C.
• Do not use electrical devices in the
product.
• Do not connect the air exit of the
product to the chimney holes which
are used for the exhaust fumes of the
devices operating with gas or other
types of fuel.
• You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
• Always clean the lint filter before or after
each loading.
• Never operate your dryer without the
lint filter installed.
• Do not allow fibre, dust and dirt
accumulation around the exhaust exit
and at adjacent areas.
• Power cable plug must be within easy
reach after installation.
• Do not use extension cords, multi-plugs
or adaptors to connect the dryer to
power supply in order to decrease the
risk of electric shock.
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a
qualified electrician change the socket
with a suitable one.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should
not be dried in the product since they
emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry unwashed items in the dryer.
• Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain remover, turpentine, paraffin and
paraffin removers must be washed
in hot water with plenty of detergent
before being dried in the dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried
in the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• This product must be grounded.
Grounding installation decreases the
risk of electric shock by opening a path
with low resistance for the electricity
flow in case of a malfunction or failure.
Power cable of this product is equipped
with a conductor and a grounding
plug that allows for grounding the
product. This plug must be installed
appropriately and inserted into a socket
which is grounded in accordance with
the local laws and regulations.
• Do not install the product behind a door
with a lock, sliding door or a door that
has a hinge against the hinge of the
3
EN
dryer.
• Do not install or leave this product
in places where it will be exposed to
outdoor conditions.
• Do not tamper with the controls.
• Do not perform any repair or part
replacing procedures on the product
even if you know or have the ability to
perform unless it is clearly suggested
in the operating instructions or the
published service manual.
• Inside and exhaust duct of the product
must be cleaned by the qualified
service personnel periodically.
• Wrong connection of grounding
conductor of the product can cause
electric shock. If you have any suspect
about the grounding connection, have
it checked by a qualified electrician,
service representative or service
personnel.
• Do not reach into the machine when
the drum is spinning.
• Unplug the machine when it is not in
use.
• Never wash down the appliance with
water! There is the risk of electric shock!
Always disconnect by unplugging from
the mains before cleaning.
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out by grabbing the plug
only. Do not operate the machine if the
power cable or plug is damaged!
• Never attempt to repair the machine
yourself, otherwise, you will be putting
your life and others’ lives in danger.
• For malfunctions that cannot be solved
by following the information given in the
safety instructions:
Turn off the machine, turn off and
contact an authorised service agent.
• Do not stop the dryer before the drying
cycle comes to an end unless you will
remove all laundry from the dryer fast
in order to lay them and dissipate the
heat.
• Remove the door of the drying
compartment before decommissioning
or disposing of the product.
• The final step of the drying cycle (cooldown cycle) occurs without applying
heat to ensure that the items are left
at a temperature that will not damage
them.
• Fabric softeners or similar products
should be used as specified by the
fabric softener instructions.
• Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result
if metal reinforcements come loose
during drying.
• Check all garments for forgotten
lighters, coins, metal pieces, needles,
etc. before loading.
• At times when your dryer is not in
use or after the laundry is taken out
following the completion of drying
process, turn off by using the On/
Off button. In cases when the On/
Off button is on (while the dryer is
energized), keep the door of the dryer
closed.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry
that are marked accordingly.
• Dry only those articles in your product
that are stated in this manual.
• This product is not intended to be
used by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
Children’s safety
• Electrical appliances are dangerous for
the children. Keep children away from
the machine when it is operating. Do
not let them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to waste
directives.
• Do not allow children sit/climb on or
enter in the product.
• Children should be supervised to
ensure that they do not play with the
product.
• Close the loading door when you leave
the area where the product is located.
4
EN
2 Installation
Refer to the nearest Authorised Service
Agent for installation of your product.
C Preparation of location and electrical
installation for the product is under
customer’s responsibility.
BInstallation and electrical connections
must be carried out by a qualified
personnel.
A Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed. Damaged products
will cause risks for your safety.
Appropriate installation location
• Install the product in an environment
which has no risk of freezing and is in a
stable and level position.
• Operate your product in a well
ventilated, dust-free environment.
• Do not block the air ducts in front of
and under the product with materials
such as long pile rugs and wooden
bands.
• Do not place your product on a long
pile rug or on similar surfaces.
• Do not install the product behind a door
with a lock, sliding door or a hinged
door which can strike the product.
• Once the product is installed, it should
stay at the same place where its
connections have been made. When
installing the product, make sure
that the rear wall of it does not touch
anywhere (tap, socket, etc.) and also
pay attention to install the product at a
place where it will stay permanently.
B Do not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls
of other furniture.
Under counter installation
• A special part (Part no. 297 360 0100)
replacing the top trim must be provided
and installed by the Authorised Service
Agent in order to use the machine
under a counter or in a cupboard. It
should never be operated without the
top trim.
• Leave at least 3 cm of space between
the side and rear walls of the product
and the walls of the counter/cupboard
when installing your product under a
counter or in a cupboard.
Mounting over a washing machine
• A fitting device should be used between
the two machines when installing above
a washing machine. The bracket must
be installed by the Authorised Service
Agent.
• Place the product on a firm floor. If
it will be placed on top of a washing
machine, the approximate weight of
both machines may reach 180 kg when
they are full. Therefore, the floor must be
capable of carrying the load on it!
Connection to water drain;
In products equipped with a condenser unit
the water accumulated during the drying
cycle is collected in the water tank. You
should drain the accumulated water after
each washing cycle.
You can directly send the accumulated
water out through the water drain hose
supplied with the machine instead of
periodically draining the water collected in
the water tank.
Connecting the water drain hose;
1. Remove the hose on the machine by
pulling it out from its end. Do not use
any tools to take out the hose.
2. Connect the special drain hose supplied
5
EN
with the machine to the pipe fitting.
3. The other end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The fitting
must always be secured in all types of
connections. Your house may be flooded
if the hose gets out of its housing during
water discharge.
Important:
• The hose should be attached to a height
of maximum 80 cm.
• You must be careful not the pinch or
bend the hose.
• The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.
Adjusting the feet
In order to ensure that your machine
operates more silently and vibration-free, it
must stand level and balanced on its feet.
Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine
stands level and firmly.
C Never unscrew the adjustable feet from
their housings.
Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as
stated in the technical specifications table.
Our company shall not be liable for any
damages that will arise when the machine
is used on a circuit without grounding.
• Connection must comply with national
regulations.
• If the current value of the fuse or breaker
in the house is less than 16 Amps, have
a qualified electrician install a 16 Amp
fuse.
• Power cable plug must be within easy
reach after installation.
• The voltage and allowed fuse or breaker
protection are specified in the “Technical
Specifications” section.
• The specified voltage must be equal to
6
your mains voltage.
• Do not make connections via extension
cables or multi-plugs.
• The main fuse and switches must have
a contact distance of minimum 3 mm.
B Damaged power cable must only be
replaced by a qualified electrician.
B If the product is faulty, it must not be
operated unless it is repaired! There is
the risk of electric shock!
First use
• To have the product ready for operation
before calling the authorised service
agent, make sure that its location
and power supply installations are
appropriate. If they are not, call a
qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.
EN
Technical specification
EN
Height (adjustable)84,6 cm
Width59,5 cm
Depth59,8 cm
Capacity (max.)8 kg
Weight (net)38 kg
Voltage
Model code
Type label is located behind the loading door.
2
See type labelRated power input
7
EN
3 Initial preparations for drying
Things to be done for energy
saving:
• Make sure that you operate the product
at its full capacity but pay attention to
not exceeding it.
• Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is decreased.
• Pay attention to dry same types of
laundry together.
• Follow the instructions in the user
manual for programme selection.
• Make sure that sufficient clearance
is provided at the front and rear side
of the dryer for air circulation. Do not
block the grill at the front side of the
product.
• Do not open the door of the machine
during drying unless necessary. If you
must certainly open the door, pay
attention not to keep it open for a long
time.
• Do not add new (wet) laundry during
drying.
• Lint and fibres released from the
laundry to the air during the drying
cycle are collected in the “Lint Filter”.
Make sure that you clean the filters
before or after each drying.
• In models with condenser, make sure
that you clean the condenser regularly
at least once every month or after every
30 drying cycles.
• In vented models, follow the chimney
connection rules in the user manual
and pay attention to the chimney
cleaning.
• Ventilate the room, where the dryer is
located, well during drying.
• For power saving in models with lamps,
at times when your dryer is not in
use, keep the door closed if the On/
Off button is pressed (if the dryer is
energized).
Laundry suitable for drying in
the machine
C Always follow the suggestions on the
laundry labels. Dry only the laundry
having a label stating that they are
suitable for drying in a dryer and make
sure that you select the appropriate
programme.
ABC
Low
D
lmn
opq
Laundry unsuitable for drying in
the machine
• Laundry items with metal attachments
such as belt buckles and metal buttons
can damage your dryer.
• Do not dry items such as woollens, silk
garments and nylon stockings, delicate
embroidered fabrics, laundry with metal
accessories and items such as sleeping
bags in the dryer.
• Laundry made of delicate and valuable
fabrics as well as lace curtains can be
creased. Do not dry them in the dryer!
• Do not dry items made of hermetic
fibres such as pillows and quilts in the
dryer.
• Laundry made of foam or rubber will be
deformed.
• Do not dry laundry containing rubber in
the dryer.
• Do not dry laundry exposed to
petroleum, oil, combustible or explosive
agents in the dryer even if they are
washed beforehand.
• Overly wet laundry or laundry with
dripping water must not be put into the
dryer.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
8
EN
well as the items that are contaminated
or spotted with such materials should not
be dried in the product since they emit
flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry your unwashed laundry in the
dryer.
• Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty
of detergent before being dried in the
dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried in
the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• Do not dry the underwear reinforced with
metal parts in the dryer. If these metal
reinforcements loosen and break during
drying, they will damage your dryer.
Preparing laundry for drying
• Check all laundry items before loading
them into the product to make sure that
there are no lighters, coins, metal items,
needles and etc. in their pockets or on
any part of them.
• Fabric softeners and similar products
must be used in accordance with the
instructions of the manufacturer of the
relevant products.
• All laundry must be spun at the highest
spin speed that your washing machine
allows for the laundry type.
• Laundry may be tangled after washing.
Separate your laundry before placing
them into your dryer.
• Sort your laundry according to their types
and thicknesses. Dry the same type of
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick
bath towels.
Correct load capacity
A Consider the information in the
"Programme Selection Table". Always
start the programme in accordance
with the maximum load capacity.
C Adding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance
will degrade when the machine is
overloaded. Furthermore, your dryer
and your laundry can be damaged.
C Place your laundry into the drum
loosely so that they will not get tangled.
9
EN
Following weights are given as examples.
Home articles
Cotton quit covers
(double)
Cotton quit covers (single)1000
Bed sheets (double)500
Bed sheets (single)350
Large tablecloths700
Small tablecloths250
Tea napkins100
Bath towels700
Spin speed / Timer programs
Operation icon
Pause icon
Water tank full warning icon
Filter cleaning warning icon
Condenser cleaning warning icon
Remaining time indicator
Spin speed is used to show the remaining time more accurately.
It does not affect the performance of your machine.
11
Child-proof lock warning icon
Time delaying mode
Door open warning icon
Anti-creasing mode
Audio warning level / Cancel audio warning
Drying degree
Anti-creasing is activated
EN
Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the “On/Off” button.
C Pressing the “On/Off” button does not
necessarily mean that the programme
has started. Press “Start/Pause/
Cancel” button of the machine to start
the programme.
Programme selection
Decide the appropriate programme from
the table below which includes drying
temperatures in degrees. Select the
desired programme with the programme
selection knob.
Drying at high
temperature only for
cotton laundry. Thick
and multi layered
Extra dry
Wardrobe dry
Iron dry
C For further programme details, see,
"Programme Selection Table"
Main programmes
Depending on the type of laundry, the
following main programmes are available:
•Cottons
You can dry your durable laundry with this
programme. Dries at high temperature. It
is recommended to use for your cotton
items (such as bed sheets, quilt cover,
underclothing, etc.).
•Synthetics
You can dry your less durable laundry
with this programme. It dries at a lower
temperature compared to the cottons
programme. It is recommended for your
synthetic laundry (such as shirts, blouses,
laundry (E.g.: towels,
linens, jeans) are dried
in a way that they do
not require ironing
before placing in the
wardrobe.
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
they do not require
ironing before placing
in the wardrobe.
Normal laundry (E.g.,
Shirts, dresses) are
dried ready to be
ironed.
synthetic/cotton blended laundry, etc.).
C Do not dry curtains and lace in your
machine.
Special programmes
For special cases, there are also extra
programmes available:
C Additional programmes may differ
according to the model of your
machine.
•Mini 35’
You can use this programme to dry your
cotton laundry that you have spun at
high speeds in your washing machine. 2.
This program dries 2 kg cotton laundry (2
Shirts / 5 T-shirts) in 35 minutes.
C To obtain better results from your
dryer, your laundry must be washed
at suitable programmes and spun at
the recommended spin speeds in the
washing machine.
•Shirts
This programme dries the shirts more
sensitively and creases them less and
thus, helps to iron them more easily.
C There may be a little humidity on your
shirts at the end of the programme. We
recommend you not to leave the shirts
in the dryer.
•Jeans
You can use this programme to dry your
jeans that you have spun at high speeds
in your washing machine.
C Review the relevant section in the
programme table.
•Mixed
Used to dry synthetic and cotton laundry
that do not release colour. Used for
laundry that is suitable for drying.
•Sport
Used to dry the laundry that are made
of synthetic, cotton or mixed fabrics and
have a tag indicating that they are suitable
for drying.
•Woolen preparation
You can use this function to ventilate
and soften your woolen laundry that can
be washed in the washing machine. Do
not use this function to dry your laundry
completely. Take out your laundry and
ventilate them immediately after the
program is over.
•15’ Shirt
You can use this feature to make 2 shirts
ready for ironing in 15 minutes.
12
EN
•Lingerie
Suitable to dry the 100% synthetic or syntheticmixture satin type underwear (night gown,
garments for upper body, pajamas) with the
word dryable in the washing instructions.
CProducts with a high accessory content
such as lace, veil, stone, beads and wires
and products with a high content of silk
should not be dried.The silk laundry with
cotton content or satin look may remain wet
when dried with this program.
small stones etc… Drying level can be
changeable according to the type and
mixture of laundry.
•Ventilation
Only ventilation is performed for 10
Tminutes without blowing hot air. You can
air your clothes that have been kept at
closed environments for a long time and
deodourise unpleasant odours thanks to
this programme.
•Timer programs
in hours and minutes as “02:30”. The
exemplary display image shows the dryer
when it is running and child-proof lock is
active.
C Programme duration may differ from the
values in the consumption table subject
to the changes in the water hardness
and temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in the
supply voltage..
You can select one of the 10 min., 20
min., 30 min., 40 min., 50 min., 60 min.,
80 min., 100 min., 120 min., 140 min.
and 160 min. timer programmes to
achieve the desired final drying level at
low temperatures. Programme dries at
the selected time regardless of the drying
temperature.
Time display
The display shows the time remaining
for the programme to complete while a
programme is running. Time is displayed
13
EN
Programme selection and consumption table
Programme table
EN2
Approximate
ProgramsCapacity (kg)
Cottons / Coloreds
Extra dry81000% 60137
A
Ready to Wear81000% 60130
A
Ready to Iron81000% 60105
A
Mini 35'
Shirt
Jeans
Shirt 15'
Mixed
Sport
Viscose
Lingerie
Woolen preparation
Synthetics
Ready to Wear4900% 4053
B
Energy consumption values
1.51000%5040
0.51200%5015
1.5600%100100
1.5600%506
Spin speed in washing
machine (rpm)
21200%5035
41200%5080
4800%6083
4800%6092
1600%4050
amount of
remaining
humidity
Drying time
(minutes)
ProgramsCapacity (kg)
Cottons linen Ready to wear*
Cottons Ready to iron
Synthetics&Mixed fabrics Ready
to wear
81000% 604.49
81000% 603.80
4900% 401.80
Spin speed in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Energy
consumption
value kWh
* : Energy Label standard programme (EN 61121:2005)
All values given in the table have been fixed according to EN 61121:2005 Standard.
These values may deviate from the table according to the laundry type, laundry spin
speed, environmental conditions and voltage fluctuations.
** : Times on the display may change depending on the drying time.
14
EN
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.