Blodgett VIB3855-1 User Manual

BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Project
Item No.
Quantity
In-Vent
conveyor oven ventilation hood system.
All data is shown per oven section, unless otherwise indicated.
EXTERIOR CONSTRUCTION
! Stainless steel exterior on front, sides, and ducts ! Integral exhaust and make-up air plenum and duct collar assembly ! Quick release duct fittings and duct extensions ! Front air make-up cooling panels ! Cooling fan motor exhaust plenum ! Conveyor entrance/exit end exhaust plenums ! Heat shields over end exhaust plenums and vertical exhaust corner riser ! Stainless steel ceiling trim pieces included
INTERIOR CONSTRUCTION
! Aluminized steel, 300 and/or 400 series stainless steel ! Insulated supply ducting
OPERATION
! Captures smoke, contaminants and cooking by-products emanating from
the oven.
! Minimizes amount of tempered air removed from kitchen by surrounding
itself and oven with a layer of untempered make-up air.
! Requires much less exhaust and make-up air flow than conventional
overhead hoods.
! Exhausts grease and smoke from directly over conveyors resulting in
cleaner oven and environment.
! Cooler surfaces lower radiant heat to room and increase operator safety
and comfort significantly
STANDARD FEATURES
! Available in three configurations
" VIB3855-1 for single MT3855 oven " VIB3855-2 for double stacked MT3855 ovens
" VIB3855-3 for triple stacked MT3855 ovens ! Fully detachable panels without tools ! Quick disconnect ducting for servicing or cleaning ! Adds only 4" to front-to-back dimensions ! Ventilation system controls can be interlocked with the oven’s controls ! Modular design for easier handling and cleaning
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
" Installation
VIB3855-1, VIB3855-2,
VIB3855-3
Single, Double, Triple
In-Vent
®
Hood System
In-Vent® Model VIB3855-1, VIB3855-2, VIB3855-3 for Blodgett Conveyor Oven MT3855
Prototype VIB3855-3 In-Vent®is shown on
Triple Stacked Blodgett Model MT3855 Conveyor Oven
which is sold separately.
BLODGETT OVEN COMPANY
www.blodgettcorp.com
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
VIB3855-1, VIB3855-2, VIB3855-3
DIMENSIONS:
Floor space 91.12" (2314mm) W x 62.3" (1852mm) D
AIRFLOW REQUIREMENTS:
Model Supply Exhaust
Duct Size (all models):12" x 12" (305mm x 305mm) 12" x 12" (305mm x 305mm)
VIB3855-1:
CFM: 1100 CFM 1500 CFM Static Pressure: 0.02-0.03" W.C. (5-7 Pa) 1.5" W.C. (373 Pa)
VIB3855-2:
CFM: 1450 CFM 1850 CFM Static Pressure: 0.09" W.C. (22 Pa) 1.4" W.C. (348 Pa)
VIB3855-3:
CFM: 1800 CFM 2200 CFM Static Pressure: 0.12" W.C. (30 Pa) 1.8" W.C. (448 Pa)
MINIMUM ENTRY CLEARANCE:
Largest uncrated component 55" x 46.3" x 20" (1397mm x 1176mm x 508mm)
SHIPPING INFORMATION:
Weight:
VIB3855-1 360 lbs. (164 kg) VIB3855-2 460 lbs. (209 kg) VIB3855-3 560 lbs. (255 kg)
Crate size:
VIB3855-1 Palletized size and number not yet finalized VIB3855-2 Palletized size and number not yet finalized VIB3855-3 Palletized size and number not yet finalized
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
APPROVAL/STAMP
P/N M10417 Rev C (6/01)
Provide Blodgett In-Vent® ventilation system, engineered for Blodgett model MT3855 conveyor oven. Exterior shall be stain­less steel on front sides and ducts. Interior shall be of aluminized steel. Baffle grease filters shall be of galvanized steel or aluminum construction. All exterior panels removable without the use of tools for access to mechanicals and cleaning. Integral exhaust and make-up air plenums connected to stainless steel duct collars with quick disconnect assemblies. Ventilation sys­tem shall comply with ANSI/NSF-2 and UL-710. Provide factory authorized assembly and installation at additional cost, per ANSI/NFPA-96. Ductwork between extension duct collars and rooftop equipment, and rooftop equipment not included.
Universal specification, based on specification sheet for specific system with specific oven model.
SYSTEM OVEN MODEL
VIB3855-1, VIB3855-2, VIB3855-3 MT3855G
SHORT FORM SPECIFICATIONS
Loading...