Blodgett KLT-100DS User Manual

KLT-DS

Direct Steam Tilting Kettle on Legs

KLT-DS TILTING KETTLE ON LEGS

Project

Item No.

Quantity

q Model KLT-20DS - 20 gallon (76 litres) direct steam tri-leg tilting kettle
q Model KLT-30DS - 30 gallon (114 litres) direct steam tri-leg tilting kettle
q Model KLT-40DS - 40 gallon (151 litres) direct steam tri-leg tilting kettle
q Model KLT-60DS - 60 gallon (227 litres) direct steam tri-leg tilting kettle
q Model KLT-80DS - 80 gallon (303 litres) direct steam quad-leg tilting kettle
q Model KLT-100DS - 100 gallon (379 litres) direct steam quad-leg tilting kettle

CONSTRUCTION

n Water resistant construction
n 304 stainless steel construction
n 2/3 jacketed
n 316 stainless steel interior cooking surface for added corrosion resistance

for 20, 30 and 40 gallon

n Hemispherical design on bottom of kettle for superior heat circulation
n Tilt mechanism permits kettle to tilt forward 90° to empty

STANDARD FEATURES

n Steam control valve mounted in console
n Stainless steel faucet bracket
n One year parts and labor warranty*

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

n Etched markings
q Gallons
q Litres
n Draw Off valves and accessories
q 2” (50mm) draw off valve
q 3” (76mm) draw off valve
q 3” (76mm) dairy valve
q Perforated strainer for draw off
q Solid stainless steel disc for draw off valve
n Faucets
q Single pantry faucet with swing spout
q Double pantry faucet with swing spout
n Covers
q One piece lift off stainless steel cover
q Spring assist hinged stainless steel cover

q 316 stainless steel liner for 60, 80 and 100 gallon
q 45 PSI (310 kPa) high pressure operation for higher

cooking temperature

q Tri-basket assembly
q Pan carrier for 40 and 100 gallon
q Strainer hook
q Graduated measuring strip
q Steam trap assembly consisting of steam trap,

check valve, and Y strainer

q Pour strainer
q Correctional package

* For all international markets, contact your local distributor.

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

KLT-DS TILTING KETTLE ON LEGS

APPROVAL/STAMP

MODEL

KLT-20DS

KLT-30DS

KLT-40DS

KLT-60DS

KLT-80DS

KLT-

100DS

SHORT FORM SPECIFICATIONS

Provide Blodgett model KLT-20DS (20 gallon), KLT-30DS (30 gallon), KLT-40DS (40 gallon), KLT-60DS (60 gallon), KLT-80DS (80 gallon) or KLT-100DS (100 gallon) direct steam tilting
kettle on legs. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior
heat circulation. Unit shall have stainless steel mounting frame to support the kettle and tilt console shall conceal the steam piping, house the steam control valve and tilt mechanism.
Each leg shall be fitted with a four hole adjustable flanged foot for securing to the floor. The tilt mechanism shall permit the kettle to tilt forward a full 90° for complete emptying. The titling
mechanism shall be self locking for positive stop action. Construction shall be all welded satin finish 304 stainless steel. 20, 30 and 40 gallon models shall have a 316 stainless steel liner.
Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.

PIPING REQUIREMENTS:

Steam Supply 3/4” IPS (19 mm)

A

21[535]

24[610]

26[660]

29.5[750]

33[840]

35.5[902]

B C D E F G H (2”) H (3”) J (2”) J (3”) K

18[460] 37[940] 34.75[885] 28.5[724] 22[559] 25.63[651] 12[305] 13.25[337] 17[432] 16.5[419] 59.5[1512]

20[510] 37[940] 37.75[960] 31.5[800] 20.75[527] 27.13[689] 12.5[317] 14.25[362] 15[381] 14.5[368] 62.5[1588]

22.5[570] 37[940]

26[660] 40.5[1029]

28[710] 42.5[1080]

30[762] 42.5[1080]

39.75[1010]

43.25[1100]

46.75[1185]

49.25[1251]

33.5[850] 20.25[514] 28.63[727] 13[330] 15.25[387] 12.5[318] 12[305] 64[1626]

37[940] 21.5[546] 30.13[765] 15.5[394] 15.5[394] 14.5[368] 14[356] 74[1879]

40.5[1030] 20[508] 32.63[828] 14.5[368] 16.25[413] 12.5[318] 12[305] 76[1930]

43[1092] 27[686] 39.25[997] 18[457] 20.25[514] 10.5[267] 10[254] 79[2007]

MINIMUM CLEARANCE:

Back & Sides 0” [0mm]

L M

- 15.38[391]

- 15.38[391]

- 16.38[416]

9.5[241] 18.38[467]

11[279] 19.88[505]

12.5[318] 21.5[546]

Condensate Return 1/2” IPS (13 mm)

SHIPPING INFORMATION:

STEAM PRESSURE:

Minimum 5 PSI (34 kPa)

Maximum 30 PSI (205 kPa) standard kettle

45 PSI (310 kPa) optional high pressure kettle

Pressure reducing valve required if incoming steam pressure exceeds the kettle rating.

NOTE: The company reserves the right to make substitutions of components without prior notice.

Approx. Weight:

KLT-20DS 240 lbs. (109 kg)
KLT-30DS 285 lbs. (129 kg)
KLT-40DS 332 lbs. (151 kg)
KLT-60DS 356 lbs. (166 kg)
KLT-80DS 424 lbs. (192 kg)
KLT-100DS 480 lbs. (218 kg)

Printed in U.S.A.

BLODGETT

www.blodgett.com • 44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

NOTE: FOR COMMERCIAL USE ONLY

P/N S00012 Rev G (7/13)