Blodgett KLS-20G User Manual

KLS-G

Gas Tri-Leg Stationary Kettle

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

n Faucets
q Single pantry faucet with swing spout
q Double pantry faucet with swing spout
n Draw Off valves and accessories
q 3” (76mm) draw off valve
q 3” (76mm) dairy valve
q Perforated strainer for draw off
n Etched markings
q Gallons
q Litres
q Spring assist hinged stainless steel cover for 20 and

40 gallon

q 208-240 VAC, 1 phase, 60hz
q Correctional package
q 316 stainless steel liner for 60 gallon models
q Graduated measuring strip
q Strainer hook
q Tri-basket assembly
q Casters

KLS-G TRI-LEG STATIONARY KETTLE

Project

Item No.

Quantity

q Model KLS-20G - 20 gallon (76 litres) gas tri-leg stationary kettle
q Model KLS-40G - 40 gallon (151 litres) gas tri-leg stationary kettle
q Model KLS-60G - 60 gallon (227 litres) gas tri-leg stationary kettle

CONSTRUCTION

n 304 stainless steel construction
n 2/3 jacketed with factory sealed distilled water enclosure
n Stainless steel control housing
n Serviceable, high efficiency stainless steel burner with no shutter

adjustment

n 316 stainless steel liner for 20, and 40 gallon models

OPERATION

n Integrally mounted controls
n Power switch
n Direct immersion thermostat
n Water sight glass
n Cook indicator light
n Pressure gauge
n Safety gas shutoff valve
n Low water light
n Low water shut off
n Pressure relief valve
n Electronic ignition
n Pressure switch
n 165-275°F (74-135°C) temperature range

STANDARD FEATURES

n Manual control
n 6” (152 mm) stainless steel adjustable legs
n 2” tangent draw off
n Hinged stainless steel covers for 20 and 40 gallon
n Spring assist hinged stainless steel cover for 60 gallon
n Stainless steel faucet bracket
n 115 VAC, 1 phase, 60hz
n One year parts and labor warranty*

* For all international markets, contact your local distributor.

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

KLS-G TRI-LEG STATIONARY KETTLE

APPROVAL/STAMP

MODEL A B C D E F G H J K K

KLS-20G 20[508] 31.25[794] 40[1016] 32[813] 3[76] 19[483] 64[1626] 24[610] 30.5[775] 6[152] 18.25[464]

KLS-40G 26[660] 35.5[902] 44[1118] 38.5[978] 2[51] 19[483] 72[1829] 29[737] 35[889] 6[152] 22[559]

KLS-60G 30[762] 40[1016] 49.5[1257] 42[1016] 2.5[63] 21.5[546] 85[2159] 35[889] 39[991] 8[203] 24.62[625]

SHORT FORM SPECIFICATIONS

Provide Blodgett model KLS-20G (20 gallon), KLS-40G (40 gallon) or KLS-60G (60 gallon) gas fired tri-leg stationary kettle. The unit shall have a double wall interior to form a steam jacket
around the lower 2/3 of the kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circula­tion. Construction shall be of all welded satin finish 304 stainless steel. Interior liner shall be 316 stainless steel on 20 and 40 gallon models. The unit shall have 6” stainless steel adjustable
legs, a 2” tangent draw off valve, hinged cover on 20 and 40 gallon models, and a spring assist cover on 60 gallon models. The recessed control panel is located on the front ise of the unit
in full view of the operator and is easy to use. The controls shall be integrally mounted and shall include a power switch, electronic ignition, direct immersion thermostat with a range of 165­275F (74-135C), water site glass with range of 165-275°F (74-135°C), a cook indicator light, pressure gauge, safety gas shutoff valve, pressure relief valve, low water light and low water
shut off. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.

MAXIMUM INPUT:

KLS-20G 100,000 BTU
KLS-40G 100,000 BTU

POWER SUPPLY:

115VAC, 1 phase, 60 Hz., 2-wire w/ground 6’ (1.8m) electric cord set furnished
208-240VAC, 1 phase, 60 Hz Supply must be wired to unit

KLS-60G 130,000 BTU

SHIPPING INFORMATION:

GAS SUPPLY:

One 1” male connection required

Minimum Inlet Pressure:

Natural 4.0” W.C. static to unit
Propane 10.0” W.C. static to unit

NOTE: The company reserves the right to make substitutions of components without prior notice.

Approx. Weight:

KLS-20G 490 lbs. (222 kg)
KLS-40G 650 lbs. (294 kg)

KLS-60G 800 lbs. (362 kg)

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

P/N S00006 Rev E (9/12)