Blodgett KETTLE STANDS User Manual
Project
Item No.
Quantity
Stand with bullet feet for electric tilting kettle
Stand with bullet feet for gas tilting kettle
STAND CONSTRUCTION
304 stainless steel
Heavy duty 1-1/2” square tubing open leg frame
18” high, heavy gauge deck for ergonomic equipment mounting
1” adjustable bullet feet
All stand surfaces shall be polished to a uniform No. 3 finish ensuring
maximum ease in cleaning and maintaining brilliant appearance, plus the
safe and easy draining of cleaning water.
Large 6” deep basin with high volume drain to a fixed lower drain pan
Rear leg casters and front leg glides provide easy movement and
stability.
A removable front hinged splash shield serves as a drainbasin and work
surface.
OPTIONAL DRAIN CART CONSTRUCTION
separate drain cart designed to fit under the kettle support stand
Pulls out for easy product transfers into steamer pans, stock pots or
buckets
Removeable splash guard
BLODGETT
44 Lakeside Avenue, Burlington, VT 0540
Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Drain Cart
Drain cart with removeable splash guard for stand with bullet feet
Drain cart with removeable splash guard for stand with casters
Drain cart plumbing install kit
Casters for stand
Flanged feet for stand (set of 4)
Flanged feet for stand (set of 2)
KETTLE STANDS
for Electric & Gas Tabletop Kettles
KETTLE STANDS
Shown with optional drain cart splash guard raised
Shown with optional drain cart slid forward
Shown with optional drain cart
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
KETTLE STANDS
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice.
28 (711)
30
(762)
20
(508)
Extension
NOTE: Hole pattern will
change per model
specifications
5/8 (16) Kettle
Mounting Holes
Pull out drain basin (stowed)
Pull out drain basin (in position)
TOP VIEW
1.13 (29)
Adjustable
18.06 (459) Ref
17.5
(445)
FRONT VIEW
Splash
Guard
28 (711) Electric Oven Stand
37.75 (959) Gas Oven Stand
1.5 (38) dia.
Drain Pipe
2.12 (56)
RIGHT SIDE VIEW
DIMENSIONS ARE IN INCHES (MM)
APPROVAL/STAMP
P/N S00150 Rev A (5/11)
SHORT FORM SPECIFICATIONS
Provide Blodgett heavy duty open leg support stand for gas and electric tabletop kettles. Kettle stand to have 1-1/2” square tube frame design; 18” high top for ergonomic equipment work
height; and adjustable bullet feet. Separate drain cart (when specified) shall have large capacity 6” deep basin with rear drain, removable combination splash shield and cover, with rear
casters and front leg glides for easy movement and stability. Provide options and accessories as indicated.
Loading...