Blodgett KCH-30DS User Manual

KCH-DS

Direct Steam Modular Cabinet Base Kettle

with Heavy Duty Hydraulic Tilt

KCH-DS CABINET BASE HYDRAULIC TILT KETTLE

Project

Item No.

Quantity

q Model KCH-30DS - 30 gallon (114 litres) direct steam cabinet base kettle

with hydraulic tilt

q Model KCH-40DS - 40 gallon (151 litres) direct steam cabinet base kettle

with hydraulic tilt

q Model KCH-60DS - 60 gallon (227 litres) direct steam cabinet base kettle

with hydraulic tilt

CONSTRUCTION

n Stainless steel kettle mounted in enclosed cabinet base
n 2/3 jacketed
n Hemispherical design on bottom of kettle for superior heat circulation
n 316 stainless steel interior cooking surface for added corrosion resis-

tance for 30 and 40 gallon

n 1/2 HP hydraulic tilt system for complete emptying of kettle. Tilting may

be stopped at any time without the kettle tilting back.

n Stainless steel counter top
n Steam control valve mounted in counter top
n Polished stainless steel doors with magnetic latches

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

n Etched markings
q Gallons
q Litres
n Strainers
q Solid
q Perforated
q Strainer hook

q 316 stainless steel liner for 60 gallon
q 50 PSI (345 kPa) high pressure operation for higher

cooking temperature

q Graduated measuring strip
q 220 volt power supply

STANDARD FEATURES

n 2” (50mm) sanitary draw off valve
n Deck mounted hot and cold water fill faucet
n Steam trap assembly
n Removable swing drain and strainer
n One piece stainless steel spring assist cover
n 6” stainless steel legs with hold down feet at rear
n Removable pan support
n 120VAC, single phase, 60 hz
n One year parts and labor warranty*

* For all international markets, contact your local distributor.

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

KCH-DS CABINET BASE TILTING KETTLE

APPROVAL/STAMP

MODEL A B C D E F G

KCH-30DS 24[610] 36[914] 16[406] 39[991] 37.25[946] 41.5[1054] 62.25[1657]

KCH-40DS 26[660] 36[914] 15[381] 40[1016] 38.38[975] 42.5[1080] 68.25[1733]

KCH-60DS 29.5[749] 42[1067] 16[406] 43[1092] 41.12[1045] 47.62[1210] 74.25[1886]

SHORT FORM SPECIFICATIONS

Provide Blodgett model KCH-30DS (30 gallon), KCH-40DS (40 gallon) or KCH-60DS (60 gallon) direct steam modular cabinet base tilting kettle. The unit shall have a double wall interior
to form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Unit shall have steam control valve and
hot/cold water fill faucet mounted on the stainless steel countertop. Unit shall be equipped with 2” (50mm) sanitary draw off, enclosed for sanitory purposes. A steam trap is standard. The
swing drain for draw off shall be removable without tools and shall be equipped with removable strainer. Unit shall have a one piece stainless steel spring assist cover and 6” stainless
steel legs with hold down feet at rear. The cabinet doors shall be polished stainless steel with magnetic latches. The unit shall have a 1/2 HP hydraulic system for tilting and a removable
pan support. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.

PIPING REQUIREMENTS:

Steam Supply 3/4” IPS
Condensate Return 1/2” IPS

STEAM PRESSURE:

Minimum 5 PSI (34 kPa)

Maximum 35 PSI (241 kPa) standard kettle

50 PSI ((345 kPa) optional high pressure kettle

Pressure reducing valve required if incoming steam pressure exceeds

POWER SUPPLY

120VAC, single phase, 60 hz
1/2” conduit connection to controls

SHIPPING INFORMATION:

Approx. Weight:

KCH-30DS 525 lbs. (238 kg)

KCH-40DS 575 lbs. (261 kg)
KCH-60DS 650 lbs. (295 kg)

the kettle rating.

WATER SUPPLY:

NOTE: The company reserves the right to make substitutions of
components without prior notice.

Cold/Hot Water 3/8” nominal tubing to faucet

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

P/N S00007 Rev D (5/13)