Blodgett B16-PF45, B20-PF65 User Manual
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
SPECIFY
Gas Type Natural Gas Propane
Manifold Front (1-1/4”) Rear (1”)
Flue Riser Height 24” (option) 36” (option)
Range Depth Standard Deep (option)
Position in Battery Left End Right End Not at End
Operating altitude (if above 2000 ft (700 meters) _____________________
Blodgett can often accommodate special or custom requirements. Contact
your Blodgett representative.
STANDARD CONSTRUCTION (All models)
Frypot: 16 gauge, type 430 #3 welded tank with extra smooth peened finish
ensures easy cleaning. Long-lasting, high temperature alloy stainless steel
heat baffles are mounted in the heat exchanger tubes to provide maximum
heating and combustion efficiency. Front access, quick opening 1-1/4” drain
valve
Gas Control System: Includes manual shut-off, 100% safety shut-off pilot gas
filter, pilot adjustment and 200° to 400° adjustable thermostat. High limit control
automatically shuts down main burner and pilot if oil temperature exceeds 475°F.
STANDARD FEATURES (All models)
New Pitco Solstice burner/baffle design increases cooking production, lowers
flue temperature, improves working environment and generates more production per BTU
Quick recovery is provided to eliminate waiting between loads
Available in 45lb and 65lb capacity
9” front rail to match sectional range
Stainless steel tank and cabinet
Two twin plated, mesh fry baskets with plastic coated, heat resistant handles
Wide spacing tube frypot allows more heat to be transferred to oil and easy
cleaning
1-1/4” full port drain valve helps eliminate clogging
Large cold zone captures food particles, reduces flavor transfer and extends
oil life
Single unit combination gas shut-off, pressure regulator and pilot ignition sys-
tem
6” adjustable legs front, 6” fixed casters rear
100% safety shut off
Warranty: two year parts and labor from date of purchase
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Flue riser
24”
36”
Baskets
Extra single basket (full size) for 14” pot
Extra twin size basket for 14” pot
Fryer filter system
Stainless steel frypot cover
Stainless steel sides
Stainless steel divider
Heat lamp over drain cabinet
Cable restraint kit
B16-PF45 and B20-PF65
Deep Sectional Fryers
MODELS B16-PF45 and B20-PF65
Project
Item No.
Quantity
Model B16-PF45 (16” wide, 45 pound capacity)
Model B20-PF65 (20” wide, 65 pound capacity)
The Blodgett Sectional Deep Fryers are available with two riser heights. An
optional rearward-extending flue riser is available to increase the overall
depth to match a deep battery. Battery-design assistance is available!
by
OPTIONAL OIL FILTRATION.
Simple two step operation: Step 1, open blue handle
valve to drain oil into filter pan. Step 2, open red handle
valve to return oil from filter to fryer.
Self-aligning filter piping makes it easy to assemble and
disassemble
Larger 3” (7.6 cm) drain line allows for faster draining
without clogging
Light weight, removable filter pickup assembly, with built-
in handle, for fast media cleaning under busy conditions
High flow pump and large return lines produce faster oil
refill times
Large filter media collects more debris, which extends
time between changes.
B16-PF45 shown
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
MODELS B16-PF45 AND B20-PF65
SHORT FORM SPECIFICATIONS
The item shall be a sectional fryer with a stainless steel frypot and cabinet. The frypot shall have a large cold zone, and hanve widely spaced tubes to enable easy cleaning. The item
shall have a pilot ignition system and a 100% safety shutoff.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
2-3/4” (70)
APPROVAL/STAMP
P/N BR00042 Rev A (2/08)
OTHER TECHNICAL INFORMATION
If casters are used with flex hose, a restraining device should be used to eliminate undue strain on the flex hose.
Minimum clearance from non-combustible construction is zero. Minimum clearance from combustible construction is 10” on sides and 6” on rear.
Check local codes for fire and sanitary regulations.
UTILITY INFORMATION
GAS: Each unit has a 1-1/4" front gas manifold that couples to the adjacent sectional unit(s), and can be ordered with a 1" rear
gas connection with a male NPT connector. Minimum supply pressure is 7" W.C. for natural gas, 11" W.C. for propane. All sectional units require a regulated gas supply; pressure regulator to be ordered separately. If using a flexible-hose gas connection, the
I.D. of the hose must not be smaller than the connector on the unit and must comply with ANSI Z21.69. Provide an adequate
means of restraint to prevent undue strain on the gas connection.
FLUE EXHAUST: Installation under a vented hood is recommended.
MODEL
GAS (BTU/hr)
Natural Gas Propane
B16-PF45 110,000 110,000
B16-PF65 150,000 150,000
7”
(178)
(Location of Optional Rear Gas Connection)
2-3/4” (70)
31-3/4”
(808)
5-1/2”
(140)
SHIPPING CRATE DIMENSIONS & WEIGHT
(Door entry clearance when uncrated is
16.5” for model B16-PF45 and 20.5” for model B20-PF65)
Model Width Height Depth Volume Weight
B16-PF45
B20-PF65
20.0
(508)
23.0
(584)
45.0
(1143)
41.0
(1041)
42.5
(1080)
43.0
(1092)
22.1 cu ft
(0.63 cu m)
23.5 cu ft
(0.66 cu m)
210 lbs
(95 kg)
265 lbs
(120 kg)
16” (406)
2” (51)
20” (508)
Dimensions are in inches and (millimeters)
Model B16-PF45 Model B20-PF65
TOP VIEWS
Flue riser for “deep” depth-option extends rearward 6”
36” Flue Riser
(frypot size is the same as for “standard” depth)
43-3/4” (1112)
24” Flue Riser
40” (1017)
37-3/4” (960)
34” (864)
72”
(1829)
Front Gas
4-1/2” (114)
Manifold
60”
(1524)
36”
30”
(914)
(762)
33-3/4”
(859)
6” (152)
Model B16-PF45 Model B20-PF65
FRONT VIEWS
SIDE VIEW
9” (178)
0(0)
Loading...