Blodgett B16-FR45 User Manual
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
SPECIFY
Gas Type Natural Gas Propane
Manifold Front (1-1/4”) Rear (1”)
Flue Riser Height 24” (option) 36” (option)
Range Depth Standard Deep (option)
Position in Battery Left End Right End Not at End
Operating altitude (if above 2000 ft (700 meters) _____________________
Blodgett can often accommodate special or custom requirements. Contact your
Blodgett representative.
STANDARD FEATURES (All models)
Stainless steel frypot and cabinet
Twin plated wire mesh fry basket with plastic coated, heat resistant handle
(single baskets available)
Tube type frypot permits over 50% more heat to be transferred to oil
Quick recovery
Battery end units have solid side (no manifold cover plate)
1-1/4” full port drain valve helps eliminate clogging
Large cold zone captures food particles, reduces flavor transfer and extends
oil life
Wide spacing between tubes permits easy cleaning
Pilot ignition system
100% safety shut-off
6" adjustable legs
Warranty: two year parts and labor from date of purchase
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Flue riser
24”
36”
Heat lamp over frypot (to keep draining food warm)
Additional Twin baskets
Single basket
Stainless-steel frypot cover
Deep range depth
Casters (in lieu of legs)
Cable restraint kit for units on casters
B16-FR45 and B20-FR65
Deep Sectional Fryers
MODELS B16-FR45 and B20-FR65
Project
Item No.
Quantity
Model B16-FR45 (16” wide, 45 pound capacity)
Model B20-FR65 (20” wide, 65 pound capacity)
The Blodgett Sectional Deep Fryers are available with two riser heights. An
optional rearward-extending flue riser is available to increase the overall
depth to match a deep battery. Battery-design assistance is available!
Model B20-FR65
Model B16-FR45
BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: (877) 255-3976 • Fax: (866) 644-1354
MODELS B16-FR45 AND B20-FR65
SHORT FORM SPECIFICATIONS
The item shall be a sectional fryer with a stainless steel frypot and cabinet. The frypot shall have a large cold zone, and hanve widely spaced tubes to enable easy cleaning. The item
shall have a pilot ignition system and a 100% safety shutoff.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
APPROVAL/STAMP
P/N BR00011 Rev C (7/07)
OTHER TECHNICAL INFORMATION
Exterior surfaces are 430 stainless steel #3 polish, except the back is aluminized steel.
Check local codes for fire and sanitary regulations.
UTILITY INFORMATION
GAS: Each unit has a 1-1/4" front gas manifold that couples to the adjacent sectional unit(s), and can be ordered with a 1" rear
gas connection with a male NPT connector. Minimum supply pressure is 7" W.C. for natural gas, 11" W.C. for propane. An external pressure regulator and shut off valve must be provided. If using a flexible-hose gas connection, the I.D. of the hose must not
be smaller than the connector on the unit and must comply with ANSI Z21.69. Provide an adequate means of restraint to prevent
undue strain on the gas connection.
FLUE EXHAUST: Installation under a vented hood is recommended.
MODEL
GAS (BTU/hr)
Natural Gas Propane
B16-FR45 140,900 120,900
B16-FR65 175,900 150,900
(Location of Optional Rear Gas Connection)
2” (51)
7”
(178)
4-1/2” (114)
31-3/4”
(808)
3-1/2”
(89)
SHIPPING CRATE DIMENSIONS & WEIGHT
(Door entry clearance when uncrated is
16.5” for model B16-FR45 and 20.5” for model B20-FR65)
Model Width Height Depth Volume Weight
B16-FR45
B20-FR65
20.0
(508)
23.0
(584)
45.0
(1143)
41.0
(1041)
42.5
(1080)
43.0
(1092)
22.1 cu ft
(0.63 cu m)
23.5 cu ft
(0.66 cu m)
210 lbs
(95 kg)
265 lbs
(120 kg)
16” (406)
2” (51)
20” (508)
Dimensions are in inches and (millimeters)
Model B16-FR45 Model B20-FR65
TOP VIEWS
36” Flue Riser
24” Flue Riser
Flue riser for “deep” depth-option extends rearward 6”
(frypot size is the same as for “standard” depth)
41-3/4” (1060)
38” (965)
35-3/4” (908)
32” (813)
72”
(1829)
60”
Front Gas
Manifold
2-1/2” (64)
(1524)
36”
30”
(914)
(762)
33-3/4”
6” (152)
Model B16-FR45 Model B20-FR65
FRONT VIEWS
Minimum clearance from noncombustible construction is zero, and 6” from combustible construction.
(859)
B20-FR65
B16-FR45
SIDE VIEW
12-3/4” (325)
9-1/2” (241)
0(0)
MAINTAIN AT LEAST 16 INCHES BETWEEN FRYER AND ANY EXPOSED FLAMES OF NEARBY COOKING EQUIPMENT.
Loading...