Blodgett (2)5E-SBC General Manual
Project
Item No.
Quantity
Model (2)3E-SBC (two 3 pan electric boiler free steamer with plumbing
connections on a stand)
Model (2)5E-SBC (two 5 pan electric boiler free steamer with plumbing
connections on a stand)
CONSTRUCTION
Stainless steel construction
Stainless steel doors with strong continuous hinge and are field
reversible for left or right swing
Insulated doors have a one piece, replaceable seal
Easy open handle and latch provide positive lock and seal when the door
is pushed or slammed shut
Hidden magnetic door switch cuts power to blower and steam flow to that
cavity, when the door is opened
Pan support racks shall be polished stainless steel and removable for
easy cleaning
Electric connectionless steam reservoir is easy to clean through the cavi-
ty door.
OPERATION
ON-OFF rocker switch
Electronic timer with continuous steam setting
Timed steam and stop buttons
Ready light indicates when cavity is ready for steaming
Unit shall come ready to steam in 15 - 20 minutes from a cold start, and
provide warm cavity-instant steam capacity. Cavity is kept warm and
ready for instant steam between loads.
Each steamer cavity shall have a powerful side mounted blower, which
increases steam velocity and provides efficient steam distribution
throughout cavity and between loaded pans and no side vents for
increased water/spray resistance.
Electric-heated steam generating reservoir provides atmospheric steam
to the cavity at approximately 212F. The high-efficiency steam generating
reservoir shall have water level sensors.
Steam reservoir does not require a pressure gauge or switches
Automatic drain in steam reservoir
CAPACITY
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Pan racks for support stand
Flanged foot kit for support stand
Caster kit for support stand
Heat shield kit
(2)E-SBC
Electric Boiler Free
Stacked Convection Steamers
E-SBC BOILER FREE CONVECTION STEAMERS
Pan Size (2)3E-SBC (2)5E-SBC
12” x 20” x 1” 12 pans 20 pans
12” x 20” x 2.5” 6 pans 10 pans
12” x 20” x 4” 4 pans 6 pans
STANDARD FEATURES
Stainless steel stand
One year parts and labor warranty*
* For all international markets, contact your local distributor.
(2)3E-SBC
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
(2)E-SBC BOILER FREE STEAMERS
SHORT FORM SPECIFICATIONS
Provide Blodgett model (2)3E-SBC (6 pan) or (2)5E-SBC (10 pan) boilerfree steamer with aself-contained, atmospheric, electric-heated steam generating reservoir. Construction shall be all stainless steel. Cavity shall have a powerful sidemounted blower to circulate
steam. Standard operating controls shall include: an onoff rocker switch; electronic timer, with continuous steam, timed steam and stop
buttons; READY light. Door shall be field-reversible and shall be equipped with an easy-open latch and hidden magnetic door switch.
The atmospheric steam generating reservoir shall not require a pressure gauge or switches; shall have an automatic drain and shall
have 12 KW of dry element heating capacity. Steamer shall come up to READY in 15 minutes from a cold start and shall provide warm
cavity, instant steam capability. Unit shall be mounted on a stainless steel stand. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components
without prior notice.
1
1 (25)
32.75
(832)
17.38
(441)
1.03 (26)
Steam exhaust
2
3
1.38 (35)
1.25 (32)
TOP VIEW
DRAIN
Unit
5
18 (457)
4
STEAM FREE
ZONE
NOTES:
Drain connection:
Water supply:
Electrical connection:
1. 2.5 (64) hose type (drain free venting). DO NOT connect
directly to drain, allow 2” air gap.
2. 3/4” male hose connection. 30 to 60 PSIG with a flow rate of
1.5-3.0 GPM. Pressure regulation is required for water pressure over 60 PSI.
Do not use treated water.
3. see chart, conduit hose size = 1.25” hole.
4. If the floor drain only services this steamer, then the drain may be located
within the steam free zone. Steam free zone must be observed if other
appliances cause steam at the floor drain.
5. Do not install steamer directly above steam venting floor drains.
6. Dimensions are in inches (mm).
A
21.75
(552)
1.5 (38) min.
2.6 (87) max
FRONT VIEW
SIDE VIEW
B
F
29.9 (759)
1
C
2
D
3
E
3
5 (127) with casters
(not shown)
Steam
Exhaust
Element
Access Panel
Double stack
stand shown
with bullet feet
Electric Supply
Electric Supply
Water Supply
Drain Connection
REAR VIEW
APPROVAL/STAMP
P/N S00151 Rev A (6/11)
MAXIMUM INPUT:
(2)3E-SBC 18 kW
(2)5E-SBC 24 kW
MININUM REQUIRED CLEARANCES:
Left and right side 2” (51mm)
Rear 6” (152mm)
SHIPPING INFORMATION:
(2)3E-SBC 485 lbs. (220 kg)
(2)5E-SBC 533 lbs. (242 kg)
VAC Phase Hz
Amps
(2)3E-SBC (2)5E-SBC
208V
1 60 44 58
3 60 25 34
240V
1 60 38 50
3 60 22 29
480V 3 60 11 15
POWER SUPPLY AND CONNECTION (per cavity)
(2)3E-SBF (2)5E-SBF
A
61.06 (1551) 64..67 (1643)
B
14.81 (376) 6.31 (160)
C
25.88 (657) 17.44 (443)
D
29.69 (754) 24.57 (624)
E
50.81 (1291) 52.13 (1324)
F
18.88 (480) 9.56 (243)
Loading...