Blodgett 20G-KLS, 40G-KLS, 60G-KLS, 80G-KLS General Manual
G-KLS
Gas Tri-Leg Stationary Kettle
Project
Item No.
Quantity
Model 20G-KLS - 20 gallon (76 litres) gas tri-leg stationary kettle
Model 40G-KLS - 40 gallon (151 litres) gas tri-leg stationary kettle
Model 60G-KLS - 60 gallon (227 litres) gas tri-leg stationary kettle
Model 80G-KLS - 80 gallon (303 litres) gas tri-leg stationary kettle
CONSTRUCTION
316 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Kettle body is sheathed in stainless steel and air gap insulated.
ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 30 PSI. Unit shall be UL listed for sale in USA and Canada. Unit shall be registered in Canada with a CRN number.
Outer sheathing and air insulating gap retains heat and keeps kettle exterior cooler to the touch.
OPERATION
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
Gallons
Litres
Strainer
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Basket inserts
Swing faucets
Automatic water filler
3” tangent drawoff
Kettle brush kit
Contour measuring strip
44 Lakeside Avenue, Burlington, VT
Gas-heated, self-contained steam source provides temperatures of 150 to 270°F
Gas regulator valve and electronic ignition module
Thermostatically controlled to shut off automatically when desired temperature is reached or on when temperature falls below desired setting
Factory charged with chemically-pure water and rust inhibitors to ensure long life and minimum maintenance
All controls are front mounted in easy reach of the operator
Regulating thermostat
Pressure gauge
Power on/off switch
Heat, power and lower water indicator lights
Water level sight glass
Pressure safety relief valve
Pressure limit control
Low water cut-off
STANDARD FEATURES
One-piece, hinged design dome cover on 20 gallon units.
One-piece domed cover with counter balanced spring-assist on 40, 60 and 80 gallon units
Faucet bracket
2” sanitary tangent drawoff
Removable 1/4” perforated stainless steel strainer
One year parts and labor warranty*
*For all international markets, contact your local distributor.
BLODGETT www.blodgett.com
05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
<![endif]>KETTLE STATIONARY LEG-TRI KLS-G
G-KLS TRI-LEG STATIONARY KETTLE |
|
|
|||
Draft Diverter |
|
|
|
APPROVAL/STAMP |
|
|
6” (152) |
|
NOTES: |
|
|
N Dia. Flue Outlet |
|
C Dia. |
|
||
|
|
1. Hinged cover standard on 20 gallon kettle. |
|||
|
|
|
|
||
Rear Clearance |
|
2. Power aid cover (shown) standard on 40-100 |
|||
|
|
|
|
gallon kettles. |
|
D |
|
ASME Approved |
|
3. Single or double pantry faucets are optional. |
|
|
30° |
4. 3” tangent drawoff is optional. |
|||
|
|
Safety Valve |
|
5. Dimensions are in inches (mm). |
|
|
|
30 PSI |
|
||
|
|
Kettle |
|
|
|
E |
|
|
|
|
|
|
6” (152) |
Leg Position |
|
|
|
|
|
|
|
||
|
|
Min. Side Clearance |
|
|
|
4-3/4” |
|
4” (102) |
|
|
|
(121) |
|
|
|
|
|
|
|
Cover Open |
|
|
|
6” (152) |
|
6-3/4” |
|
|
|
Min. Side |
|
See notes 1 & 2 |
|
|
|
F |
(171) |
|
|
||
Clearance |
(not shown in other views) |
|
|
||
|
Faucet |
B O.D. |
|
||
TOP VIEW |
|
|
|||
|
|
Bracket |
|
A I.D. |
|
|
|
|
|
|
R |
|
|
|
|
M |
Optional 3” |
|
|
|
|
w/Cover |
|
|
|
|
2” Tangent |
Tangent Drawoff |
|
|
|
|
P Open |
||
H |
|
|
|
||
|
|
Drawoff |
|
|
|
Rim |
|
|
|
|
|
Height |
G |
|
|
|
|
|
|
K |
|
|
|
|
S |
|
L |
|
|
|
|
|
Pilot Access Door |
Adjustable |
Electrical C |
Burner Assy |
C Gas |
|
L |
(not shown in |
||
|
Bullet Feet |
Connection |
L |
|
|
other views) |
Connection |
||
|
|
|||
|
FRONT VIEW |
|
|
|
|
|
|
|
RIGHT SIDE VIEW
SHORT FORM SPECIFICATIONS
Provide Blodgett model 20G-KLS (20 gallon), 40G-KLS (40 gallon), 60G-KLS (60 gallon) or 80G-KLS (80 gallon) gas heated, stainless steel, steam jacketed kettle. Unit shall include 2” tangent draw-off valve, (3”optional) and No. 41 cover. 40to 100 gallon units furnishedwith No. 51 spring assistedcover. Steam jacket is insulatedand ASME code constructedfor maximum workingpressure of 30 PSI. Unit is thermostatically controlled, with electronic ignition standard. Requires 1/2” gas supply and 115 Volt electric service. Provide options and accessories as indicated.
MAXIMUM INPUT: |
Natural Gas |
Propane |
|
20G-KLS |
40G-KLS |
60G-KLS |
80G-KLS |
||||
20G-KLS |
|
85,000 BTU |
85,000 BTU |
A |
20 (508) |
26 (660) |
30 (762) |
31.75 (806) |
|||
40G-KLS |
|
100,000 BTU |
85,000 BTU |
|
|
|
|
|
|||
|
B |
26.13 (664) |
32.38 (822) |
36 (914) |
37.75 (959) |
||||||
60G-KLS & 80G-KLS |
145,000 BTU |
145,000 BTU |
|
|
|
|
|
|
|||
C |
24 (610) |
30.38 (772) |
33.5 |
(851) |
35.75 (908) |
||||||
GAS SUPPLY: |
|
|
D |
26.5 |
(673) |
29.13 (740) |
29.5 |
(749) |
30.5 |
(775) |
|
1/2" NPT connection required. A gas shut-off valve must be installed in supply |
E |
50.75 |
(1289) |
56.25 (1429) |
58.25 |
(1480) |
61.25 |
(1556) |
|||
piping convenient and adjacent to unit. |
|
|
|
|
|
|
|
||||
|
F |
39.5 (1003) |
43.25 (1099) |
46.25 |
(1175) |
48 (1219) |
|||||
Inlet Pressure: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
G |
33.5 |
(851) |
33 (838) |
38.13 (968) |
43.25 |
(1099) |
||
Natural |
4.5" W.C. min, 14” W.C. max |
|
|
|
|
|
|
|
|
|
|
|
H |
40 (1016) |
41 (1041) |
48.88(1241) |
56.5 (1435) |
||||||
Propane |
11" W.C. min, 14” W.C. max |
|
|||||||||
|
J |
9 (229) |
9 (229) |
11 (279) |
11.5 |
(292) |
|||||
ELECTRICAL CONNECTION: |
|
|
|||||||||
|
|
K |
18.5 |
(470) |
16.75 (425) |
21.38 (543) |
24.25 (616) |
||||
Requires one 115 Volt, single-phase, 60 HZ, 5 AMP supply. |
|
|
|
|
|
|
|
||||
L |
6.75 |
(171) |
6 (152) |
6.13 |
(156) |
8.5 (216) |
|||||
SHIPPING INFORMATION: |
|
|
M |
73 (1854) |
74.75 (1899) |
76.63 |
(1946) |
91.5 (2324) |
|||
Approx. Weight: |
|
|
|
N |
6 (152) |
6 (152) |
7 (178) |
7 (178) |
|||
20G-KLS |
468 lbs. (212 kg) |
|
|
P |
17.5 |
(445) |
21.38 (543) |
24.63 (625) |
29.5 |
(749) |
|
40G-KLS |
620 lbs. (281 kg) |
|
|
R |
17.5 |
(445) |
21 (533) |
16.63 (422) |
24.5 |
(622) |
|
60G-KLS |
885 lbs. (401 kg) |
|
|
|
|
|
|
|
|||
|
|
S |
12 (305) |
12 (305) |
12 (305) |
12 (305) |
|||||
80G-KLS |
1067 lbs. (484 kg) |
|
|
|
|
|
|
|
|||
|
|
NOTE: The |
company reserves the right to make substitutions of |
||||||||
|
|
|
|
components without prior notice. |
|
|
|
|
|||
BLODGETT www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
Printed in U.S.A. |
NOTE: FOR COMMERCIAL USE ONLY |
P/N S00116 Rev A (4/11) |
Loading...