Blodgett 20DS-KPS User Manual
Project
Item No.
Quantity
Model 20DS-KPS - 20 gallon (76 litres) direct steam pedestal stationary kettle
Model 40DS-KPS - 40 gallon (151 litres) direct steam pedestal stationary kettle
CONSTRUCTION
316 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Heavy, durable bar rim with a continuous seal weld on the underside to
ensure maximum durability and sanitation.
ASME shop inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 25 PSI
Stainless steel pedestal base, with the outer circumference of the
pedestal flanged down vertically to ensure proper sealing to the floor or
deck
STANDARD FEATURES
Faucet bracket
One-piece, hinged design dome cover
2” sanitary tangent drawoff
Removable 1/4” perforates stainless steel strainer
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 8658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
Gallons
Litres
Faucets
Single pantry faucet
Double pantry faucet
Strainer
1/8” perforated disc strainer
1/4” perforated disk strainer
Solid disc strainer
Basket inserts
Higher working pressure
3” tangent drawoff
Cold water cooling
Steam trap assemblies
Kettle brush kit
Steam regulators
Contour measuring strip
DS-KPS
Direct Steam Pedestal Stationary Kettle
DS-KPS PEDESTAL STATIONARY KETTLE
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 8658-6600 • Fax: (802) 864-0183
DS-KPS PEDESTAL STATIONARY KETTLE
SHORT FORM SPECIFICATIONS
Provide Blodgett model 20DS-KPS (20 gallon) or 40DS-KPS (40 gallon) direct steam pedestal stationary kettle. Unit shall be solid
one-piece welded construction with heavy duty reinforced bar rim. 2” sanitary tangent drawoff standard. 20- and 40-gallon units
filled with one-piece hinged dome cover. NSF listed, ASME code constructed for 25 PSI. Unit mounted on all stainless steel
pedestal with outer circumference flanged vertically to ensure sealing to floor or deck. Steam trap assembly and direct steam
source required. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components
without prior notice.
9/16" (14) DIA.,
(4) HOLES
M
Dia.
N
Dia.
45°TYP
SECTION A-A
FLOOR MOUNTING
U
T
OPTIONAL 3"
TANGENT DRAWOFF
C
ASME Approved
Safety Valve
B
'R' NPT
Steam Inlet
'P' NPT
Condensate
Outlet
Optional
Faucet
TOP VIEW
K
A
E
Rim
Height
L
A
NOTE: Cover is not shown in this view
A I.D.
Finished Floor
Faucet Bracket
(Removable)
FRONT VIEW
NOTES:
1. Kettle must be securely anchored to the floor.
2. Position center of tangent drawoff spout 4-5”
over floor sink for proper operation.
3. Dimensions are in inches (mm).
2" (51)
Drawoff
Valve
'P' NPT
Condensate
Outlet
H
6 (152)
open
J
Strainer
and Stay
S
D
Cover
Open
G
6 (152)
F
4"(102) Min.
Floor Sink See Note 3
RIGHT SIDE VIEW
4.5
(114)
APPROVAL/STAMP
P/N S00121 Rev A (4/11)
MAXIMUM PRESSURE (all models):
25 PSI (173 kPa) (optional higher working pressure is available)
SHIPPING INFORMATION:
Approx. Weight:
20DS-KPS 179 lbs. (81 kg)
40DS-KPS 220 lbs. (100 kg)
20DS-KPS 40DS-KPS
A
20 (504) 26 (660)
B
26.25 (667) 31.75 (806)
C
22 (559) 28 (711)
D
59 (1499) 65 (1651)
E
36 (914) 36 (914)
F
5.5 (140) 7 (178)
G
12 (305) 13.25 (343)
H
15.5 (400) 11.75 (298)
J
17 (432) 14 (356)
K
8 (203) 10.25 (260)
L
18.75 (476) 15.75 (400)
M
12 (305) 16 (406)
N
10.25 (260) 14.5 (368)
P
0.5 (13) 0.5 (13)
R
0.5 (13) 0.75 (19)
S
18 (457) 25 (635)
T
14 (356) 16 (406)
U
14.75 (375) 10.75 (273)
Loading...