Blodgett 10DS-KTT User Manual
Project
Item No.
Quantity
Model 10DS-KTT - 10 gallon (38 litres) direct steam table top tilting kettle
Model 12DS-KTT - 12 gallon (45 litres) direct steam table top tilting kettle
CONSTRUCTION
304 stainless steel, one-piece welded construction
2/3 jacketed kettle
All exposed surfaces shall be stainless steel
Sturdy cast, chrome plated stainless steel arms for sturdy support
No exposed steam piping. The steam supply enters through the left kettle
support arm, through an integrated steam control valve into the jacket at
the rotary joint, down through the support arm.
Rim shall be reinforced with a welded butterfly shaped pouring lip, for
pouring control and durability
Right side handle for controlled pouring of kettle content
Rear leg stops the kettle in the upright position
Handy support arm mounted steam control valve eliminates counter or
table top mounted control valves
ASME shop-inspected, stamped and registered with the National Board
for operation up to a maximum working pressure of 55 PSI
STANDARD FEATURES
One year parts and labor warranty*
* For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Basket inserts
Lift off cover
Steam trap assemblies
316 stainless steel interior
DS-KTT
Direct Steam Tabletop Tilting Kettle
DS-KTT TABLETOP TILTING KETTLE
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
DS-KTT TABLETOP TILTING KETTLE
SHORT FORM SPECIFICATIONS
Provide Blodgett model 10DS-KTT (10 gallon) or 12DS-KTT (12 gallon) direct steam tabletop tilting kettle.Unit shall have
full bottom hemisphere steam jacket with one piece welded construction of Type 304 stainless steel, and sturdy tubular
support arms. Reinforced bar rim, with butterfly shaped pouring lip standard. Right side handle for controlled pouring of
kettle contents. NSF listed, ASME code constructed and National Board registered. Operates dependably from 5 up to
55 PSI maximum. Integrated steam control valve standard. Steam and condensate connections required. Provide
options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components
without prior notice.
1-5/16 (33)
NOTES:
1. Dimensions are in inches (mm).
4 (102)
19-3/4
(502)
16
(406)
TOP VIEW
8-3/16
(208)
B
A
22-3/4 (578)
11-3/8 (289)
26-3/4 (679)
Steam control
valve handle
1.63
(41)
3/8 IPS
Steam
outlet
3/8 IPS
steam inlet
FRONT VIEW
17-1/2 (445)
Min. rear clearance
5-3/4 (146)
2-1/2 (64)
4-1/2 (114)
C
D
14-3/16
(360)
8-3/8
(208)
2.88 (73)
E maximum
Pour
Path
Tilted
position
Wall
SIDE VIEW
APPROVAL/STAMP
P/N S00123 Rev A (4/11)
MAXIMUM PRESSURE:
55 PSI (379 kPa) (optional higher working pressure is available)
SHIPPING INFORMATION:
Approx. Weight:
10DS-KTT 110 lbs. (50 kg)
12DS-KTT 115 lbs. (52 kg)
10DS-KTT 12DS-KTT
A
22.38 (568) 23.88 (606)
B
14.5 (368) 15.75 (400)
C
16.75 (425) 18.25 (464)
D
30.94 (762) 32.44 (824)
E
16 (406) 17.5 (445)
Loading...