BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 • Phone: (802) 658-6600 • Fax: (802) 864-0183
MODEL 1048
Deck Oven
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Flexible gas hose with quick disconnect and
restraining device:
36" (914 mm)
48" (1219mm)
Stainless steel stacking crown angle leg frame
assembly
Casters
Stainless steel crown angle trim
Flue connector
Vent kit
OPTIONS AND ACCESSORIES
(AT NO ADDITIONAL CHARGE)
Centigrade dial, 150°C to 340°C
No. 12 gauge (3.02mm) press-formed, reinforced
and flanged aluminized steel deck (1048-S)
EXTERIOR CONSTRUCTION
Full angle iron frame
Stainless steel front, top, sides and back
Spring assist door with concealed hinges
Heavy chrome plated tubular steel door handle
32" (794mm) stainless steel legs (for single unit)
12" (273mm) stainless steel legs (for double unit)
Burner door opens easily for ignition, cleaning or adjustment, without removal
of any fastenings
Vitreous fiber insulation at top, back, sides, bottom and doors
INTERIOR CONSTRUCTION
47-1/4" x 36" x 10" (1200mm x 914mm x 254mm) oven compartment interior
Aluminized steel baking compartment liner
Aluminized steel combustion chamber
Ultra Rokite deck supported by an angle iron frame
OPERATION
Two free-floating, easily removable duplex-tube burners
Removable fixed orifices on main and pilot burners
Main gas valve, temperature control valve and safety pilot valve fully within
section body and are accessible through a covered and ventilated
compartment in front
Air mixers with adjustable air shutters and locking device
Snap throttle thermostat with temperature control range of 300°F (149°C) to
650°F (343°C)
STANDARD FEATURES
Fahrenheit dial 300°F to 650°F
Ultra Rokite deck
Two year parts and one year labor warranty
Five year limited oven door warranty*
* For all international markets, contact your local distributor.
1048 - Single/Double
Project
Item No.
Quantity
Ovens consist of basic sections and are a complete and separate unit
capable of operating alone or in combination.
All data is shown per oven section, unless otherwise indicated.
Refer to operator manual specification chart for listed model name.