Blodgett 100G-KLS User Manual

Project

Item No.

Quantity

 Model 20G-KLS - 20 gallon (76 litres) gas tri-leg stationary kettle
 Model 40G-KLS - 40 gallon (151 litres) gas tri-leg stationary kettle
 Model 60G-KLS - 60 gallon (227 litres) gas tri-leg stationary kettle
 Model 80G-KLS - 80 gallon (303 litres) gas tri-leg stationary kettle
 Model 100G-KLS - 100 gallon (379 litres) gas tri-leg stationary kettle

CONSTRUCTION

 316 stainless steel, one-piece welded construction
 2/3 jacketed kettle
 All exposed surfaces shall be stainless steel
 Kettle body is sheathed in stainless steel and air gap insulated.
 ASME shop inspected, stamped and registered with the National Board

for operation up to a maximum working pressure of 30 PSI. Unit shall be
UL listed for sale in USA and Canada. Unit shall be registered in Canada
with a CRN number.

 Outer sheathing and air insulating gap retains heat and keeps kettle

exterior cooler to the touch.

OPERATION

 Gas-heated, self-contained steam source provides temperatures of 150

to 270°F

 Gas regulator valve and electronic ignition module
 Thermostatically controlled to shut off automatically when desired tem-

perature is reached or on when temperature falls below desired setting

 Factory charged with chemically-pure water and rust inhibitors to ensure

long life and minimum maintenance

 All controls are front mounted in easy reach of the operator
 Regulating thermostat
 Pressure gauge
 Power on/off switch
 Heat, power and lower water indicator lights
 Water level sight glass
 Pressure safety relief valve
 Pressure limit control
 Low water cut-off

STANDARD FEATURES

 One-piece, hinged design dome cover on 20 gallon units.
 One-piece domed cover with counter balanced spring-assist on 40, 60,

80 and 100 gallon units

 Faucet bracket
 2” sanitary tangent drawoff
 Removable 1/4” perforated stainless steel strainer
 One year parts and labor warranty*

* For all international markets, contact your local distributor.

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

 Etched markings

 Gallons
 Litres

 Strainer

 1/8” perforated disc strainer
 1/4” perforated disk strainer

 Solid disc strainer
 Basket inserts
 Swing faucets
 Automatic water filler
 3” tangent drawoff
 Kettle brush kit
 Contour measuring strip

G-KLS

Gas Tri-Leg Stationary Kettle

G-KLS TRI-LEG STATIONARY KETTLE

BLODGETT

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401 • Phone: [phone] • Fax: [phone]

G-KLS TRI-LEG STATIONARY KETTLE

Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY

NOTE: The company reserves the right to make substitutions of compo­nents without prior notice.

NOTES:

1. Hinged cover standard on 20 gallon kettle.

2. Power aid cover (shown) standard on 40-100
gallon kettles.

3. Single or double pantry faucets are optional.

4. 3” tangent drawoff is optional.

5. Dimensions are in inches (mm).

Draft Diverter

N Dia. Flue Outlet

Rear Clearance

6” (152)

D

E

6” (152)

Min. Side

Clearance

4-3/4”

(121)

ASME Approved

Safety Valve

30 PSI

6” (152)
Min. Side Clearance

4” (102)

6-3/4”
(171)

TOP VIEW

F

H

Rim

Height

G

Pilot Access Door

Adjustable
Bullet Feet

Faucet

Bracket

FRONT VIEW

C

L

Gas
Connection

L

S

K

C

L

Electrical
Connection

2” Tangent

Drawoff

P

RIGHT SIDE VIEW

Burner Assy

(not shown in

other views)

M

w/Cover

Open

A I.D.

B O.D.

Cover Open

See notes1&2

(not shown in other views)

R

Optional 3”

Tangent Drawoff

30°

C Dia.

Kettle

Leg Position

APPROVAL/STAMP

P/N S00116 Rev B (6/11)

20G-KLS 40G-KLS 60G-KLS 80G-KLS 100G-KLS

A

20 (508) 26 (660) 30 (762) 31.75 (806) 31.75 (806)

B

26.13 (664) 32.38 (822) 36 (914) 37.75 (959) 37.75 (959)

C

24 (610) 30.38 (772) 33.5 (851) 35.75 (908) 35.75 (908)

D

26.5 (673) 29.13 (740) 29.5 (749) 30.5 (775) 30.5 (775)

E

50.75 (1289) 56.25 (1429) 58.25 (1480) 61.25 (1556) 61.25 (1556)

F

39.5 (1003) 43.25 (1099) 46.25 (1175) 48 (1219) 48 (1219)

G

33.5 (851) 33 (838) 38.13 (968) 43.25 (1099) 43.25 (1099)

H

40 (1016) 41 (1041) 48.88(1241) 56.5 (1435) 62.5 (1588)

J

9 (229) 9 (229) 11 (279) 11.5 (292) 11.5 (292)

K

18.5 (470) 16.75 (425) 21.38 (543) 24.25 (616) 24.25 (616)

L

6.75 (171) 6 (152) 6.13 (156) 8.5 (216) 8.5 (216)

M

73 (1854) 74.75 (1899) 76.63 (1946) 91.5 (2324) 97.5 (2477)

N

6 (152) 6 (152) 7 (178) 7 (178) 7 (178)

P

17.5 (445) 21.38 (543) 24.63 (625) 29.5 (749) 35.25 (895)

R

17.5 (445) 21 (533) 16.63 (422) 24.5 (622) 24.5 (622)

S

12 (305) 12 (305) 12 (305) 12 (305) 12 (305)

SHORT FORM SPECIFICATIONS

Provide Blodgett model 20G-KLS (20 gallon), 40G-KLS (40 gallon), 60G-KLS (60 gallon), 80G-KLS (80 gallon) or 10G-KLS (100 gallon) gas heated, stainless steel, steam jacketed ket­tle. Unit shall include 2” tangent draw-off valve, (3”optional) and No. 41 cover. 40to 100 gallon units furnishedwith No. 51 spring assistedcover. Steam jacket is insulatedand ASME code
constructedfor maximum workingpressure of 30 PSI. Unit is thermostatically controlled, with electronic ignition standard. Requires 1/2” gas supply and 115 Volt electric service. Provide
options and accessories as indicated.

MAXIMUM INPUT: Natural Gas Propane

20G-KLS 85,000 BTU 85,000 BTU
40G-KLS 100,000 BTU 85,000 BTU
60G-KLS, 80G-KLS & 100G-KLS 145,000 BTU 145,000 BTU

GAS SUPPLY:

1/2" NPT connection required. A gas shut-off valve must be installed
in supply piping convenient and adjacent to unit.

Inlet Pressure:

Natural 4.5" W.C. min, 14” W.C. max
Propane 11" W.C. min, 14” W.C. max

ELECTRICAL CONNECTION:

Requires one 115 Volt, single-phase, 60 HZ, 5 AMP supply.

SHIPPING INFORMATION:

Approx. Weight:

20G-KLS 468 lbs. (212 kg)
40G-KLS 620 lbs. (281 kg)
60G-KLS 885 lbs. (401 kg)
80G-KLS 1067 lbs. (484 kg)
100G-KLS 1135 lbs. (515 kg)