Block ECONOMY SMART Catalog Page

1.1

1.2

5.1

1.3

2.1

2.2

3.1

3.2

3.3

5.2

4.0

Power supplies

Electronic circuit breakers

2

Electronic circuit breaker with
thermomagnetic characteristic

ECONOMY SMART

General Data

Nominal input voltage 12 / 24 / 48 Vdc

Output channels 2 / 4 / 8

Tripping current 1 - 6 A / 2 - 10 A

Thermomagnetic characteristic

Ambient temperature -25 °C to +70 °C

Protection index IP 20

Efficiency typ. 99 %

Advantages

Adjustable tripping current for each output channel via current selector
switch

Ability to turn-on high load capacitance at each channel

Sequential and load-dependent switching-on of channels

Comprehensive single-channel-diagnostics and remote switching on/off of
each output channel via 2-wire-interface

LED signalisation and remote request for each output channel

Group alarm contact

StandardsZ

Applications

ECONOMY SMART circuit breakers with a thermomagnetic characteristic
represent an economical alternative to the classic circuit breaker. They also
ensure reliable tripping even in the case of high line resistance. This makes the
circuit breakers ideal for use in standard machine production. The electronic
circuit breaker distributes and monitors the load current over several current
circuits. Overloads and short circuits on an output are reliably recognized. The
electronics permit brief current peaks and switch longer overloads off. The
rated current for each output can be individually set with a current selector
switch accessible from the front. The outputs are activated depending on
the time delay and load to avoid an overload current. If the rated current
is exceeded for a certain amount of time, the output will be switched off
automatically and can be reactivated after a waiting time (thermal relaxation)
using the pushbutton or the remote signal input S1. The pushbutton can also
be used to switch the output manually. It is possible to read out the state of
each output using the three signal contacts. The state of each output is also
indicated with a multi-colored LED.

Approvals o J U # Z

Electronic circuit breaker
UL 508, UL 2367

Safety:
EN 60950-1, EN 50178,
EN/IEC 60204-1

EMC:
EN 61000-6-2, EN 61000-6-3

Safety extra-low voltage (SELV/PELV):
IEC 60364-4-41 (DIN VDE 0100-410)

CE acc. to 2004/108/EG (EMC-Directive)

UL 2367 (E-File: E356250)UL 508 (E-File: E219022)GL

Subject to change

369

+

-

Electronic circuit breaker with
thermomagnetic characteristic

ECONOMY SMART

Typ PM-0724-240-0 PM-0724-400-0 PM-0724-400-2 PM-0748-200-0

Input

Input rated voltage 24 Vdc 24 Vdc 24 Vdc 48 Vdc

Input voltage range 18 - 30 Vdc 18 - 30 Vdc 18 - 30 Vdc 32 - 58 Vdc

Maximal residual ripple of supplied input voltage 3 % 3 % 3 % 3 %

Required input voltage for turning-on of outputs 19.5 V (Turn-off Threshold 18 V) 19.5 V (Turn-off Threshold 18 V) 19.5 V (Turn-off Threshold 18 V) 35 Vdc

Max. total input current 24 A 40 A 40 A 20 A

Max. input current for each pole of terminal 40 A 40 A 40 A 40 A

Over voltage protection Suppressor diode 33 V Suppressor diode 33 V Suppressor diode 33 V Suppressor diode 68 V

Stand-by current 35 mA @ 24 V 35 mA @ 24 V 35 mA @ 24 V

Power losses in stand-by mode 0.84 W @ 24 V 0.84 W @ 24 V 0.84 W @ 24 V

Output

Output rated voltage 24 Vdc 24 Vdc 24 Vdc 48 Vdc

Output rated current 4 x 1 - 6 A 4 x 2 - 10 A 4 x 2 - 10 A 2 x 2 - 10 A

Maximum voltage drop between input and output 120 mV @ 4 x 6 A 200 mV @ 4 x 10 A 200 mV @ 2 x 10 A

Initialization time of module 250 ms 250 ms 250 ms 250 ms

Turn-on delay of outputs Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s

Waiting periode after switch-off of an output 500 ms (short circuit) ... 10 s (overload) 500 ms (short circuit) ... 10 s (overload) 500 ms (short circuit) ... 20 s (overload) 500 ms (short circuit) ... 20 s (overload)

Max. power losses 4.2 W @ 4 x 6 A 10 W @ 4 x 10 A 10 W @ 4 x 10 A

Efficiency 99.0 % 99.0 % 99.0 % 99.0 %

Internal output fuse 15 A 15 A 15 A 15 A

Resistance to reverse feed max. 35 Vdc 35 Vdc 35 Vdc 58 Vdc

Parallel use of outputs Not allowed Not allowed Not allowed Not allowed

Serial use of outputs Not allowed Not allowed Not allowed Not allowed

Signaling

Status indicator LED (red, green, orange) LED (red, green, orange) LED (red, green, orange) LED (red, green, orange)

Signal input S1 DC 24 V (On/Off/Reset) DC 24 V (On/Off/Reset) DC 24 V (On/Off/Reset) 15 - 58 Vdc (On / Off / Reset)

Signal output S2 DC 24 V, max. 25 mA

(status output channels)

DC 24 V, max. 25 mA
(status output channels)

"13": Solid State Relais; max. 58 Vdc /
40 Vac / 100 mA

"S2“: 24 Vdc, 20 mA, short circuit proof,
status report of outputs

Signal output S3 DC 24 V, max. 25 mA

(Common signalling output)

DC 24 V, max. 25 mA
(Common signalling output)

"14": Solid State Relais; max. 58 Vdc /
40 Vac / 100 mA

"S3“: 24 Vdc, 20 mA, short circuit
proof; high = OK, low = min. one channel
tripped

Approvals

Approvals cURus, cULus, GL cURus, cULus, GL cURus, cULus, GL cURus, cULus, GL

Environment

Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C

Ambient temperature -25 °C to +70 °C -25 °C to +70 °C -25 °C to +70 °C -25 °C to +70 °C

Derating - - - -

Type of cooling Natural convection Natural convection Natural convection Natural convection

Required minimum spacing (left/right) 0 mm 0 mm 0 mm 0 mm

Required minimum spacing (over/under) 40 mm 40 mm 40 mm 40 mm

Safety and protection

Protection index

IP 20 IP 20 IP 20 IP 20

Safety class

III, without PE connection III, without PE connection III, without PE connection III, without PE connection

Degree of pollution 2 2 2 2

Order numbers

Order Number PM-0724-240-0 PM-0724-400-0 PM-0724-400-2 PM-0748-200-0

+

-

Power supplies

Electronic circuit breakers

2

Electronic circuit breaker with
thermomagnetic characteristic

ECONOMY SMART

Typ PM-0712-200-0 PM-0712-400-0 PM-0724-120-0 PM-0724-200-0

Input

Input rated voltage 12 Vdc 12 Vdc 24 Vdc 24 Vdc

Input voltage range 10 - 16 Vdc 10 - 16 Vdc 18 - 30 Vdc 18 - 30 Vdc

Maximal residual ripple of supplied input voltage 3 % 3 % 3 % 3 %

Required input voltage for turning-on of outputs 10.5 V (Turn-off Threshold 10 V) 10.5 V (Turn-off Threshold 10 V) 19.5 V (Turn-off Threshold 18 V) 19.5 V (Turn-off Threshold 18 V)

Max. total input current 20 A 40 A 12 A 20 A

Max. input current for each pole of terminal 40 A 40 A 40 A 40 A

Over voltage protection Suppressor diode 33 V Suppressor diode 33 V Suppressor diode 33 V Suppressor diode 33 V

Stand-by current 44 mA @ 12 V 44 mA @ 12 V 35 mA @ 24 V 35 mA @ 24 V

Power losses in stand-by mode 0.53 W @ 12 V 0.53 W @ 12 V 0.84 W @ 24 V 0.84 W @ 24 V

Output

Output rated voltage 12 Vdc 12 Vdc 24 Vdc 24 Vdc

Output rated current 2 x 2 - 10 A 4 x 2 - 10 A 2 x 1 - 6 A 2 x 2 - 10 A

Maximum voltage drop between input and output 200 mV @ 2 x 10 A 200 mV @ 4 x 10 A 120 mV @ 2 x 6 A 200 mV @ 2 x 10 A

Initialization time of module 250 ms 250 ms 250 ms 250 ms

Turn-on delay of outputs Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s Load dependent, min. 50 ms / max. 5 s

Waiting periode after switch-off of an output 500 ms (short circuit) ... 10 s (overload) 500 ms (short circuit) ... 10 s (overload) 500 ms (short circuit) ... 10 s (overload) 500 ms (short circuit) ... 10 s (overload)

Max. power losses 5.3 W @ 2 x 10 A 10 W @ 4 x 10 A 2.5 W @ 2 x 6 A 5.5 W @ 2 x 10 A

Efficiency 99.0 % 99.0 % 99.0 % 99.0 %

Internal output fuse 15 A 15 A 15 A 15 A

Resistance to reverse feed max. 35 Vdc 35 Vdc 35 Vdc 35 Vdc

Parallel use of outputs Not allowed Not allowed Not allowed Not allowed

Serial use of outputs Not allowed Not allowed Not allowed Not allowed

Signaling

Status indicator LED (red, green, orange) LED (red, green, orange) LED (red, green, orange) LED (red, green, orange)

Signal input S1 DC 12-24 V (On/Off/Reset) DC 12-24 V (On/Off/Reset) DC 24 V (On/Off/Reset) DC 24 V (On/Off/Reset)

Signal output S2 DC 12 V, max. 25 mA

Signal output S3 DC 12 V, max. 25 mA

Approvals

Approvals - cURus, cULus, GL cURus, cULus, GL cURus, cULus, GL

Environment

Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C

Ambient temperature -25 °C to +70 °C -25 °C to +70 °C -25 °C to +70 °C -25 °C to +70 °C

Derating - - - -

Type of cooling Natural convection Natural convection Natural convection Natural convection

Required minimum spacing (left/right) 0 mm 0 mm 0 mm 0 mm

Required minimum spacing (over/under) 40 mm 40 mm 40 mm 40 mm

Safety and protection

Protection index

Safety class

Degree of pollution 2 2 2 2

Order numbers

Order Number PM-0712-200-0 PM-0712-400-0 PM-0724-120-0 PM-0724-200-0

(status output channels)

(Common signalling output)

IP 20 IP 20 IP 20 IP 20

III, without PE connection III, without PE connection III, without PE connection III, without PE connection

DC 12 V, max. 25 mA
(status output channels)

DC 12 V, max. 25 mA
(Common signalling output)

DC 24 V, max. 25 mA
(status output channels)

DC 24 V, max. 25 mA
(Common signalling output)

DC 24 V, max. 25 mA
(status output channels)

DC 24 V, max. 25 mA
(Common signalling output)

Subject to change

370