Blizzard Komply Remote Datasheet
Komply™ Remote
Komply™ Remote is an advanced RGB controller + RF remote, perfect for
use with Komply™ RGB LED ribbon products. It comes packed with 60
static color presets, plus multicolor color fade/jump auto programs with
speed control. The included remote is very easy-to-use with its touch
sensitive buttons + color wheel control.
Main Features:
• Touch-sensitive buttons, ultra-thin, and lightweight.
• 60 static color presets, plus built-in programs with speed control.
• Easy-to-use touch color wheel for single point selection, or continuous
touch for dynamic color selection.
Remote Buttons:
• Power = Turns the contoller on/o
• Play/Pause = Pause or resume dynamic programs
• Multicolor Wheel = 55+ touch points
• M+ = Color wheel button control on
• M- = Color wheel control o (static mode active)
• B+ = Brightness level up, incremental (1-100)
• B- = Brightness level down, incremental (1-100)
• S+ = Speed level up, incremental (1-100)
• S- = Speed level down, incremental (1-100)
Status LEDs (controller):
• Power - Illuminates when recieving power. Remote will go into
standby mode when controller is not powered on. Slightly shake the
remote once to exit standyby mode.
• Signal - Illuminates when synced with remote.
Sync the Remote to the Controller:
• Long press the power button on the remote for >3 seconds.
• The status LED will flicker upon successful pairing.
Control
Weight +
Dimensions
Output: 3-channel
60 static color presets,
plus multicolor color
fade/jump auto progams
with speed control
Width:
Depth:
Height:
Weight:
1.7” (42 mm)
4.3” (108 mm)
1” (27 mm)
130g
Working temperature:
Remote distance: 20
meters (65.6 ft.)
Remote power: 3x AAA
batteries
Thermal
-20-60ºC
Controller modes:
Mode # Function Description
1-60 Static colors 1-60 correspond
with color wheel colors
61 Three-color snap color
change
62 Three-color fade color
change
63 Seven-color snap color
change
64 Seven-color fade color
change
Power +
Current
Supply voltage: DC12~24V
Static power
consumption: <1W
Output Current: <4A
(per ch.)
Output power:
12V:<144W, 24V:<288W
Connection: Common
anode
Brightness is adjustable,
speed is not adjustable
Speed is adjustable, brightness is not adjustable
Speed is adjustable, brightness is not adjustable
Speed is adjustable, brightness is not adjustable
Speed is adjustable, brightness is not adjustable
2-year limited warranty
Warranty
blizzardlighting.com
info@blizzardlighting.com 1.866.493.6025
1.866.493.5025
Connections:
• Connect the load wire first, followed by the power wire.
• Do not exceed DC12~24V input voltage.
Komply™ Remote
blizzardlighting.com
Komply™ RGB LED Ribbon
info@blizzardlighting.com 1.866.493.6025
1.866.493.5025
Loading...