Blizzard Komply DMX-24 Users Manual
Coding switch
Function
switch1-9 is off
black
Switch1=ON
red
Switch2=ON
green
Switch3=ON
blue
Switch4=ON
yellow
Switch5=ON
purple
Switch6=ON
cyan
Switch7=ON
white
Switch8=ON
seven-color jumpy changing (8 step speed)
Switch9=ON
seven-color gradual changing (8 step speed)
Coding switch
Function
switch1-7 is off
0 steps
Switch1=ON
1 steps
Switch2=ON
2 steps
Switch3=ON
3 steps
Switch4=ON
4 steps
Switch5=ON
5 steps
Switch6=ON
6 steps
Switch7=ON
7 steps (the greatest speed)
Blizzard Lighting - Komply™ DMX-24
24CH DMX512 Decoder
I . Main description:
Working temperature: -20-60℃ Input Supply Voltage: DC12V~24V
External dimension: L340*W142*H57 Output : 24-CMOS open-drain output
Connection mode: common anode
II．Function:
1.
Each Komply DMX-24 controller occupies 24 DMX addresses. Each coding switch can set address code from 1
to 9, 1 is the lowest, and 9 is the highest. A combination of 511 address codes are possible. DMX original
address code is the total value of the coding switch value from 1 to 9. Dial the coding switch upward (ON is set
to 1) to set the bit value (by default the bit value is 0). For example: if you want to set 37 as the address code,
you can only dial down the first, the third, and the sixth code switch, the total value of coding switch from 1 to
9 is 32+4+1. The default address code of DMX512 is 37.
2. DMX signal can be received when coding switch FUN (10) = OFF (ON is set 0)
3. When coding switch that FUN (10) is ON, its function is as follows:
Output current: 2A/channel
4. If coding switch is 8 or 9, from 1 to 7 is the choice for speed, there are 8 steps in all, the description is as follows:
5. There are several switches is ON at the same time, the great value is standard.
III. Interface diagram:
IV．Attention:
1. Supply voltage of this product is DC12V~24V，other higher voltages would most probably destroy it.
2. Lead wire should be connected correctly according to colors that connection drawing offers.
the
Loading...