Page 1
4-Ch RGB(W) Decoder
This is a 4-channel DMX512 decoder that can control up to
4 different 12V LED ribbon products or any one RGB(W)
LED strip. It can run in stand-alone mode by via the DIP
switches or under DMX512 control using XLR or RJ45
DMX512 Input/Output connections. It converts DMX signal
to PWM signal, which can be controlled by a DMX512
console with 256-grayscale levels per channel. It also
includes one male, and one female 3-pin XLR connector.
And of course, it is backed by a 2-year warranty!
Komply™ DMX
power
2 pin wire 2 pin wire
com
1hc 2hc 4hc
power
KOMPLY™ DMX
signal in
3 pin wire
DMX signal out
DMX CONTROLLER
signal out
3 pin wire
power
com
ch3ch3
ch1ch2 ch4
power
KOMPLY™ DMX KOMPLY™ DMX
signal in
signal out
3 pin wire
power
2 pin wire
power
signal in
moc 1hc 2hc
ch3
ch4
signal out
Main Features
• Easy to mount and configure
• DMX address configurable via dip switches
• 256 level brightness control
• Full color (16.7M colors)
• 7 static colors + auto in standalone
• Can be used with a single channel for brightness control
• Overload protection, overheat protection, auto-reset
• Certifications: CE, Rohs
Overview
DMX In/Out: RJ45 and
XLR
7x static colors + auto in
standalone
Grayscale: 256/channel
Weight +
Dimensions
Dimensions: 166 x 67 x
41mm
Weight: 0.9 lbs
blizzardlighting.com
Power + Current
Input voltage: 12V to 24V
Input DMX Signal:
Thermal
Working temperature:
-20 to 60C
DMX512/1990 digital
Output Signal: 4 channels
@ up to 4A per channel
Output power:
12V:<108W, 24V:<192W
info@blizzardlighting.com 1.866.493.6025
1.866.493.5025
Warranty
2-year limited warranty
Loading...