Blaupunkt AUSTIN CD41 User Manual

AUSTIN CD41

PWR

OPEN

SENS

SC/PS

AUD

XBASS

RPT

MIX

200 WATTS

654321

BND

DISP

AUSTIN CD41

MUTE

High-Power FM/AM/CD Receiver with Detachable Face Autoradio FM/AM à lecteur CD, de forte puissance et à face amovible Receptor FM/AM/Reproductor de CD de Alta Potencia y con Panel Extraíble Rádio FM/AM/CD de Alta Potência com Painel Removível

Robert Bosch Corporation Sales Group — Blaupunkt Division 2800 South 25th Avenue, Broadview, Illinois 60155 www. blaupunkt. com

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

FCC WARNING Precautions Handling the Front Panel

This equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga hinst harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with instructions, may cause harmful interference with radio communications. However, there is no guarantee that radio interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Features

• Detachable Flip Down Front Panel

• Built-in Power Amplifier (max. output : 50W × 4ch)

• 4-ch F & R Preamp Output

• 2-ch Subwoofer Preamp Output

• FM/AM PLL Synthesizer Tuner

• 30 Station Preset Memory

• Travel Store / Scan Tuning

• X-Bass System

• Station Name, Disc Name Store / Station Call

• Auxiliary-input

• Optional IR Remote Control

• CD Changer Control

(IDCA09, CDCA08 & CDCA071*)

* CDCA071 requires adaptor # 7607 898 093 available

separately.

• Avoid installing the unit where it would be subject to high temperatures, such as in direct sunlight or a hot air stream from the heater, or where it would be subject to dust, dirt, or excessive vibration.

• Do not turn on the unit if the temperature inside the car is very high. Always cool down the unit before usage. Parking your car in direct sunlight will result in a temperature rise.

• If the unit does not turn on, check the connections first. Then check whether the fuse at the back of the unit is blown.

• Carefully read this manual before using the unit. If you encounter any problems that are not covered in this manual, please consult the dealer where you purchased the unit or the dealer nearest to you.

• This unit has been designed specifically for playback of compact discs bearing the be played.

• Do not use non-conventional discs such as heart-shaped, octagonal discs, etc. The player could be dameged.

mark. Other discs cannot

Handling Compact Discs

• Be careful when removing a compact disc after the playback is completed because the disc may be extremely hot.

• Do not use non-conventional discs such as heart-shaped, octagonal discs, etc. The player could be damaged.

• Do not expose compact discs to direct sunlight or any heat source.

• Check all compact discs before playing, and discard cracked, scratched or warped discs.

• Wipe dirty or damp discs outward from the centre with a soft cloth.

• Do not use any solvents such as commercially available cleaners, antistatic spray, or thinner to clean the compact discs.

Attaching the Front Panel

Place the right hand side of the front panel so that the parts A of the front panel are engaged with the parts B of the unit as shown below. Then push the left hand side of the front panel until it is securely locked.

Front Panel Open / Close

Panel open Panel close

Press the

Security / Retailer Display

Bolt the front panel with the locking screw (See page 10) in the inner cover as shown below, to protect the front panel from robbery and from getting lost.

OPEN

. Raise the front panel with your

finger until it locks in place.

Locking screw

ENGLISH

FRANÇAIS

ESPAÑOL

PORTUGUÊS

E-1

Identification of Controls

PWR

OPEN

SC/PS

AUD

XBASS

RPT

MIX

200 WATTS

654321

BND

DISP

AUSTIN CD41

MUTE

Notes

• Be sure to use this unit with the front panel closed. The unit is automatically switched off when the front panel is left open for about 10 minutes.

• Do not handle the unit roughly when opening/closing the front panel.

• Do not put any object or use it like a tray when the front

ENGLISH

panel is open in a lying position.

• Do not press OPEN button when closing the front panel.

• Do not put much force to the operation buttons or the display window as it may cause damage or deform the unit.

• Connectors on the unit and front panel are vital parts transmitting the signal. Do not touch, push and scratch them.

• Be careful not to pinch your fingers or hands when opening and closing the front panel.

• Do not press hard on the front panel when affixing it to the unit. No more than light to moderate pressure should be needed.

FRANÇAIS

• Make sure there is no dust or dirt on the electrical terminals on the back of the front panel as this could cause intermittent operation or other malfunctions.

• Clean with alcohol & swabs.

ESPAÑOL

Detaching the Front Panel

1. Press the

OPEN

firmly to open the flip down front panel.

2. Pull the front panel toward your direction to remove it.

3. Close the inner cover.

Do not leave inner cover in the down position unless the front panel is in place.

Ejecting the CD

Press the recessed button located to the left behind the Front Panel.

1314 712

1 OPEN button

Open the flip down front panel.

2 PWR button

Turns the power of the unit on or off.

3 TUN/TRK button

Used to tune in to the desired station.

4 LCD Display window 5 CD button

Select the operating source (CD, CD changer or AUX).

6 BND/TS button

Selects the AM/FM Band & Travel store.

7 DISP button

Mode selector. Clock adjustment. Display priority setting.

8 MUTE/SENS button

Muting the sound. Switches the seek sensitivity between local and distance.

9 XBASS button

Boosting the bass sound.

10 PRESET MEMORY button

During radio reception :

- 6; For Preset memory

During CD mode :

4/MIX

; For Mix play (Mix & Mix all during CDC)

5/RPT

; For Repeat play

; For Pause

PORTUGUÊS

E-2

EJECT button

General Operations

11 DISC SELECT button

Select the desired CD in CDC (CD changer) mode.

12 SC/PS button

Scan tuning. Preset scan tuning. Scan play in CD/CDC mode.

13 AUD button

Audio control selector; Bass, Treble, Loudness, Balance & Fader.

14 Dial

Adjusts the volume level/bass/treble/balance/fader.

Storing the station names. Select alfa-numeric characters.

15 Infrared Sensor (behind acrylic facia)

Permits wireless remote control of AM/FM/CD and CD changer with optional credit card style remote. See Dealer for Details.

Turning the power On/Off

Press the

Tip

When you turn on the unit, “HELLO” will be displayed then “WELCOME” will momentarily be displayed before actual

power on. When you turn off the unit, “SEE YOU” will be displayed then “GOOD-BYE” will momentarily be displayed before actual power off. You can edit these messages. (See “Turn on/off message edit”)

PWR

to turn on or off the unit.

Volume Level Control and Memory

Rotate the dial to adjust the volume. It is also possible to set the maximum volume for when the power is switched on by following the procedure explained below.

1. Turn the dial until it is set at the required volume.

Volume down

Volume up

MUTE / SENS

PWR

for two or more seconds. The power will

MUTE / SENS

again.

2. Press the

be switched off and the current volume level recorded.

Muting the sound

Press “ MUTE ” appears on the display window. To restore the previous volume level, press

Setting the Clock

The clock uses a 12-hour display system. (factory set)

1. Turn the ignition key to the ON position.

2. Press the

3. Repeatedly press the

PWR

to turn on the unit.

DISP

to display “ CLOCK 12 ”.

4. Rotate the dial within 5 seconds to select the 12 or 24-

hour time mode. Each time you rotate the dial, the mode changes or toggles as follows :

CLOCK 24

CLOCK 12

5. Repeatedly press the

Press the

B. Rotate the dial to set the hour digit.

C. Press the

D. Rotate the dial to set the minute digit.

6. Press the

ting mode.

Note

If you make no button input or dial operation in 20 seconds, the Clock setting mode will turn off automatically.

Ignition-off Clock Recall

The display will illuminate showing the time and then automatically shut off after 5 seconds. Press the tion.

DISP

while the ignition switch is in the “ OFF ” posi-

DISP

to display “ CLK ADJ ”.

MUTE / SENS

within 5 seconds to flash the hour digit.

MUTE / SENS

to flash the minute digit.

momentarily to complete the Clock set-

ENGLISH

FRANÇAIS

ESPAÑOL

E-3

PORTUGUÊS

Mode Selector

Each time the over as shown below;

Priority

STN CALL LEVEL 1

ENGLISH

Display priority setting

Display Priority can be set for the following items;

Radio mode

• Frequency and Station Name, plus during

CDC (CD changer) mode

• Disc No, Track No, Track time and Disc name.

FRANÇAIS

Example

To set Station Name to the Display Priority.

1. Press the

appears in the display window.

2. Hold the

“ NO NAME” or a previously assigned station name blinks once to indicate that Station Name is selected for the Display Priority. After 5 seconds, the display mode will automatically re-

ESPAÑOL

turn to the Display Priority showing either “NO NAME” or the station name.

Tip

Frequency Display is initially set to the Display Priority, and Station Name (“NO NAME”) is set to the “Temporary” indicator.

DISP

is pressed, the display window will change

Temporary (NO NAME)

CLOCK 12 MESSAGE

DISP

CLK ADJ

DISP

three times, and the temporary display

pressed for more than 2 seconds.

METER 1

Adjusting the Sound Characteristics

1. Press the

as follows;

BASS 0 TREBLE 0 LOUD OFF (LOUDNESS)

AUD

R0 F0 (FADER)

to select the desired adjustment mode

L0 R0 (BALANCE)

2. Rotate the dial to adjust the selected item.

Adjust within 3 seconds after selecting the item. After 3 seconds, the dial reverts to volume control. Use the following tables as a guide for adjusting the settings in each mode.

Adjustment Range

BASS BASS -5 BASS +5

TREBLE TREBLE -5 TREBLE +5

LOUDNESS LOUD OFF LOUD ON

BALANCE L9 R0(Full left) L0 R9(Full right)

FADER R9 F0(Full rear) R0 F9(Full front)

Tip

Settings for BASS, TREBLE, LOUDNESS and XBASS can be made to each of the following modes independently:

FM, AM, CD Changer and AUX.

Switching the Source (Selecting auxiliary input)

You can connect the auxiliary equipment (Portable cassette player, MP3 player, etc.) to this radio via optional AUX-IN cable. (See page 11)

Each time the change over as shown below;

Press the

is pressed, the operation source will

CD changer or AUX

BND / TS

to return to tuner mode.

Note

If the CD button is pressed when no CD has been loaded into the unit, The CD mode will skip to the CD changer mode or AUX mode. Also, if the CD changer is not connected, the system will move across to the AUX mode regardless of whether auxiliary equipment is connected or not (“MP3/AUX” will be displayed.) It is not possible to switch to the AUX mode when the CD changer is connected.

Remote Control (Optional)

You can operate your receivers basic AM, FM, CD & CDC features via an optional IR Remote Control. Optional Credit Card type remotes are available. See dealer to order RC823 Credit Card remote.

PORTUGUÊS

E-4

+ 10 hidden pages