Blaupunkt ATLANTA RCM 169 User Manual
Radio / Cassette
Atlanta RCM 169
Operating instructions
Erklärung der Positions-Nummern siehe Kurzanleitung
16
1
2
3
131415
2
4
12
11
5
10
20
9
6
78
21
17
1
3
19
18
23
22
2
Contents
Quick Reference........................... 53
RC 08 remote control unit ........... 62
Important notes ............................ 63
What you need to know ........................ 63
Traffic safety ......................................... 63
Installation............................................. 63
Telephone mute.................................... 63
Accessories .......................................... 63
Guarantee............................................. 63
International telephone information...... 63
KeyCard theft protection
system........................................... 64
Operating the unit for the first time....... 64
Incorrect KeyCard ............................. 64
Removing the KeyCard ........................ 64
“Training” a second KeyCard /
Replacing a KeyCard............................ 65
Incorrect KeyCard ............................. 65
Displaying the radio pass data ............. 65
Short Additional Memory (S.A.M.)........ 65
Turn On Message (T.O.M.) .................. 65
Flashing light as theft protection .......... 65
Care of your KeyCard........................... 66
Lost or damaged KeyCard ................... 66
Training the new KeyCard.................... 66
First-time installation................... 67
Activating the Install menu ................... 67
Closing the Install menu ....................... 67
Setting the clock ................................... 67
Entering your Owner Identification ....... 67
Reset to default settings....................... 68
Switching the ignition connection on/off.. 68
Switching the internal output stage
on/off ..................................................... 68
Connecting external equipment ........... 68
Closing the INSTALL menu.................. 68
Selecting the operating mode.....69
Optimising the viewing angle ..... 69
Radio operation with RDS ........... 70
Switching between the menu levels ..... 70
AF - Alternative frequency.................... 70
REG - regional program ....................... 71
Selecting a waveband .......................... 71
Station tuning........................................ 71
Automatic tuning
Manual tuning with << / >>................ 72
Scrolling through the broadcasting
networks (FM only) ............................... 72
Changing the memory bank (FM)......... 72
Storing stations..................................... 72
Automatically storing the strongest
stations with Travelstore....................... 73
Recalling stored stations ...................... 73
/ ....................... 71
Scanning stored stations with
Preset Scan .......................................... 73
Scanning stations with Radio Scan...... 74
Changing the scan time (Scan)............ 74
Selecting the seek tuning sensitivity .... 74
Switching from stereo to mono (FM) .... 74
Automatic bandwidth adjustment
(SHARX) ............................................... 74
PTY - Program Type............................. 74
Switching PTY on/off......................... 75
Program type ........................................ 75
Checking the program type of the
station................................................ 75
Selecting and storing PTY program
types .................................................. 75
PTY seek tuning................................ 76
Radio text.............................................. 76
Traffic information station
reception with RDS-EON ............. 77
Traffic announcement priority on/off .... 77
Warning beep ....................................... 77
Switching the warning beep off ............ 77
Automatic seek tuning start .................. 78
Adjusting the volume for traffic
announcements and the warning beep .. 78
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
51
PORTUGUÊS
Contents
Tape operation ............................. 78
Inserting a cassette .............................. 78
Removing a cassette ............................ 78
Switching on tape deck operation ........ 78
Dolby B NR*.......................................... 78
Selecting the display mode .................. 79
Track reverse........................................ 79
Scanning cassette titles with SCAN ..... 79
Selecting titles with S-CPS................... 79
Repeating titles with RPT ..................... 80
Fast tape forward/rewind...................... 80
Listening to the radio while fast
forwarding or rewinding the tape
with Radio Monitor (RM)....................... 80
Automatically skipping over blank
portions of the tape with Blank Skip
(BLS)..................................................... 80
Care instructions................................... 80
CD changer operation.................. 81
Switching on CD changer
operation............................................... 81
Selecting the display mode .................. 81
Selecting CDs ....................................... 81
Selecting tracks .................................... 82
Repeating tracks/CDs........................... 82
TPM (Track Program Memory)............. 82
Switching TPM playback on/off......... 82
Storing tracks with TPM .................... 82
Deleting the TPM .............................. 82
MIX........................................................ 83
SCAN .................................................... 83
52
Entering CD names .............................. 83
Deleting CD names/TPM at the same
time ....................................................... 83
Clock - Time.................................. 84
Displaying the clock.............................. 84
Setting the clock ................................... 84
Selecting a 12 or 24-hour mode........... 85
Synchronisation .................................... 85
DSA................................................ 85
An overview of the equalizer functions 85
Activating the equalizer settings........... 85
Switching the equalizer on/off .............. 86
Self-adjusting equalizer ........................ 86
Hi-fi self-adjustment.............................. 86
Starting the hi-fi self-adjustment........... 86
Manual equalizer adjustment ............... 87
Activating an equalizer setting ............. 87
DNC ............................................... 88
Adjusting DNC ...................................... 88
Adjusting DNC sensitivity ..................... 88
Switching DNC on/off ........................... 88
Safety information................................. 88
DSC programming ....................... 89
TUN (Tuner).......................................... 89
DISP (Display) ...................................... 90
VAR (Various)....................................... 90
KC (KeyCard) ....................................... 91
CLK (Clock) .......................................... 92
CDC (changer)...................................... 93
Overview of the DSC default
settings.................................................. 93
Specifications............................... 94
Amplifier................................................ 94
Tuner..................................................... 94
Tape deck ............................................. 94
Glossary -
Technical Terminology................ 94
Index.............................................. 97
Installation instructions ............ 384
Quick Reference
1 Unlocking the fold-down operating
panel
After the operating panel has been unlocked it is possible to insert or remove
the KeyCard or a cassette.
Press 1 to unlock the panel, it will
fold down forwards. The operating
panel cannot be removed and must not
be used as a storage shelf. To close
and lock the operating panel, push it
back to its original position (arrow 3).
2
1
3
For safety’s sake, the operating
panel must always remain
closed while the vehicle is moving.
When you leave the vehicle,
open the operating panel and remove the KeyCard as added theft
protection.
2 ON
Switching the unit on:
With the KeyCard inserted, press ON
briefly.
The unit will begin to operate in the
mode last selected at the power-on
volume.
When the unit is switched on for the
first time, “INSTALL” will appear in the
top line of the display. Now it is possible to alter important basic settings,
such as the clock, proof of ownership,
reset to the default settings, etc.
If necessary, refer to the section on
“First-time installation”.
Press EXIT to quit this menu.
Switching the unit off:
Press ON for approx. 1 sec.
The angle of the display can be adjust-
ed to optimise its legibility. If necessary, refer to the section on “Optimising the viewing angle”.
Switching the sound on/off:
Press ON briefly. If the sound has
been switched off, “Mute” will appear
in the display.
You can switch on the sound again by
turning the volume knob 3.
Switching the unit on/off with the
KeyCard:
The unit can also be switched on/off by
inserting or removing the KeyCard.
Also refer to No. B in the Quick Reference for the section on the KeyCard
theft protection system.
Switching the unit on/off with the ignition:
The unit can be switched on/off with
the vehicle ignition if the unit has been
installed accordingly.
After you switch off the ignition, you
will hear a beep to remind you to remove the KeyCard before you leave
the vehicle.
Switching the unit on when the ignition is off
If the ignition is switched off (but the
KeyCard in place), it is possible to operate the unit as follows:
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
53
PORTUGUÊS
Quick Reference
After the beep press ON. The unit will
switch on.
After the unit has played for an hour, it
will switch off automatically to prevent
the vehicle battery from running down.
3 Adjusting the volume
Turn the knob to adjust the volume.
The volume setting will appear in the
top line of the display. When the unit is
switched on, it will play at a pre-defined volume (VOL).
VOL can be adjusted as well (refer to
“DSC programming - VAR, VOL”).
4 Softkeys / Display
Softkey = a key with changing functions
You can select the functions which appear in the display.
Radio operation
Switching between the menu levels
During radio operation, you can press
TU to switch between menu level 1
and menu level 2.
Menu level 1 contains four pages
(FM1, FM2, FM3, FMT) which can be
used to store radio stations. Press
NEXT to switch to the next page.
Menu level 2 has two pages containing
functions related to radio operation.
Page 1 includes FM, TS, TA, AM, PS,
SCAN.
Page 2 includes AF, LOC, PTY, REG,
RT, MONO. Press PRE or NEXT to
switch between the pages.
The unit will switch back to menu level
1 automatically 8 sec. after the last key
has been pressed.
Menu level 1
Station keys and memory banks
NEXT - FM
Switches between FM1, FM2, FM3,
FMT
NEXT - AM (MW, LW)
Switches between the MW and LW
wavebands
Keys 1 - 6
To store and recall radio stations on
the FM waveband: FM1, FM2, FM3,
FMT.
It is possible to store and recall 6 stations each on the MW and LW wavebands.
To store stations: Press the key for approx. 1 sec.
To recall stations: Press the key briefly.
54
Quick Reference
Menu level 2
Adjusting the radio functions
NEXT - FM
Switches to additional radio functions:
AF, LOC, PTY, REG, RT, MONO
PRE
Switches to the previous radio functions:
FM, TS, TA, AM, PS, SCAN.
FM
Switches to FM.
TS (Travelstore)
Automatically stores the six stations
with the strongest reception in the
“FMT” memory bank.
TA (Traffic Announcement = Priority
for traffic information)
“TP” will appear in the display when
the radio is tuned into a station which
broadcasts traffic information.
“TA” will appear when the priority for
traffic information has been activated.
Switching priority on/off: Press TA.
To interrupt a traffic message: Press
STOP. Stop will only appear in the display during traffic message broadcasts.
ENT (Enter)
Press this key to accept/store the settings made.
EXIT
Press this key to end/cancel any settings made.
AM
Switches to AM (MW or LW).
Press NEXT to select the other AM
waveband.
PS (Preset-Scan)
The radio stations stored on the preset
keys in reception range will be
scanned one after the other.
To stop the Preset Scan function:
Press EXIT.
SCAN
All of the radio stations within reception range on the selected waveband
will be scanned.
To stop the Scan function:
Press EXIT.
Switch to
AF, LOC, PTY, REG, RT, MONO:
Press NEXT.
If you want to activate these functions
from menu level 1, first press TU and
then NEXT.
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
55
PORTUGUÊS
Quick Reference
AF
(Alternative Frequency for RDS operation)
Switching AF on/off: Press AF briefly.
LOC - Local
Press LOC to switch the seek tuning
sensitivity between “Local” and “Distance”.
PTY
(Program Type)
PTY changes the station keys into program keys.
Switching PTY on/off: Press PTY briefly. PTY will light up under top line in
the display.
REG (Regional)
Gives priority to regional programs.
Switching REG on/off: Press REG
briefly.
RT - Radio text
Transmits the text broadcast by the radio station selected.
Radio text cannot be activated unless
the ignition is off or you have switched
to “IGN off” in the Install menu.
MONO
Switches between stereo/mono
When the unit is switched on, it automatically switches to stereo.
Tape deck operation
During tape deck operation, the tape
deck functions can be selected when
you press the corresponding softkeys.
REVerse
Switches to the other tape track (side).
The display indicates which side (A/B)
is currently playing.
SCAN
Scans the songs on the cassette
briefly.
To start/stop Scan: Press SCAN.
When Scan is switched on, the corresponding red arrow will flash.
RPT (Repeat)
Repeats the scanned or the next song.
The song will continue to repeat until
RPT is switched off. The Repeat function will end automatically when the
cassette is removed or the tape deck is
switched off.
To switch Repeat on/off: Press RPT.
The function will be displayed briefly in
the top line of the display and the DOT
display.
When RPT has been activated, the
corresponding red arrow will light up.
RM (Radio Monitor)
Plays the radio while the tape is fastforwarding or rewinding. When the red
arrow lights up in front of “RM”, the radio will play when the tape is fast-forwarding or rewinding.
To switch RM on/off: Press RM. The
function will be displayed briefly in the
top line of the display and the DOT display.
56
Quick Reference
BLS (Blank Skip)
Skips over blank portions of the tape.
When the red arrow lights up in front of
“BLS”, this function has been activated.
As soon as the system detects a
pause of more than 10 seconds in the
tape playback, it will automatically fastforward the tape to the next song.
To switch Blank Skip on/off: Press
BLS. The function will be displayed
briefly in the top line of the display and
the DOT display.
DLBY (
Dolby B NR*)
Cassettes recorded using Dolby B NR
can be played back in the best possible quality. The function has been activated when the red arrow lights up in
front of “DLBY”.
To switch Dolby on/off: Press DLBY.
The function will be displayed briefly in
the top line of the display and the DOT
display.
* The noise reduction system is manufactured
under licence from the Dolby Laboratories Licensing Corporation. The word DOLBY and the
double-D symbol are trademarks of the DOLBY
Laboratories.
CD changer operation (CDC)
During CD changer operation, use the
corresponding softkeys to select MIX,
SCAN, RPT (repeat), TPM and NAME.
Press CDC:
During CD changer operation, menu
level 1 indicates which magazine slots
contain CDs, use NEXT to page
through.
Press CDC to switch the menu level.
Now you can activate the functions
from “MIX” to “NAME”.
MIX
CD tracks are played in random order.
Press MIX to select the following functions:
- MIX CD = The tracks on the CD selected are played in random order.
The CDs are selected in numerical
order, the tracks then played back in
random order.
- MIX MAG = All of the tracks on the
CDs in the magazine are played
back in random order.
- MIX OFF = switches the function off.
SCAN
Scans the tracks on all of the CDs.
Start SCAN:
Press SCAN. The tracks will be
scanned in ascending order.
End SCAN:
Press SCAN. The track last scanned
will begin to play.
RPT - Repeat
CD tracks and entire CDs can be
played repeatedly.
Press RPT to select from the following
functions:
- REP TRCK = repeats track
- REP CD = repeats CD
- RPT off = switches the function off.
TPM - Track Program Memory
Stores and plays back your favourite
tracks. It is possible to archive up to 99
CDs with a maximum of 40 tracks each
(refer to the section on “TPM programming”).
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
57
PORTUGUÊS
Quick Reference
CLR
Deletes the TPM (refer to the section
on “Deleting the TPM”).
NAME
You can enter names with a maximum
of 7 characters for up to 99 CDs.
When these CDs are played, the name
entered will appear in the top line of
the display if the display has been set
to “Name” (refer to the section on “CD
naming”).
5 Top line
Indicates a function of the operating
mode selected, e.g. the radio station
selected during radio operation.
You can use DIS to select what is displayed in the top line.
Radio operation
EUROPE 1 - radio station name
or
102.40 - frequency
or
Pop M(usic) - PTY code
or
10:53 - clock
Tape deck operation
Side A / B - Tape side
Forward - Fast forward
Rewind - Fast rewind
CPS FF/FR - Cassette Program
Search forwards/back
CD changer operation
VIVALDI - CD name
or
CD 2 T 2 - CD number and track
number
or
10:53 - clock
6 DSA (Digital Sound Adjustment)
DNC (Dynamic Noise Covering)
Adjusts the volume to the driving
noise. Refer to the section on “DSA” or
“DNC”.
7 Rocker switch
Radio operation
If you press the rocker switch while
you are on menu level 2, the unit will
automatically switch back to menu
level 1.
/ Radio station seek tuning
Up
Down
<< / >> Up/down in increments
(for FM only, when AF and
PTY are switched off)
For FM only:
<< / >> Pages through the station net-
work when AF and PTY are
switched off, e.g.: NDR 1, 2, 3,
4, N-JOY ... .
58
Quick Reference
Tape deck operation
/ Selects title (S-CPS)
Forward
Rewind
>> Fast forward
<< Fast rewind
CD changer operation
<< / >> Selects CDs
>> Up: Press briefly
<< Down: Press briefly
/ Selects tracks
Up: Press briefly
CUE - fast forward (audible):
Hold pressed down
Down: Press briefly twice or
repeatedly in succession
Restart a track: Press briefly
Review - fast reverse (audible): Hold pressed down
8 DSC (Direct
Software Control)
Use DSC to adjust those basic settings
which can be programmed. For more
information refer to “DSC programming”.
9 AUD
Adjusts Treble, Bass, Fader (front/
rear), Balance (left/right), Loudness
(boosts lower frequency ranges at low
volume to create a more natural
sound) and SUB (-out) to adjust the
amplifier level for the SUB-woofer.
Making adjustments:
Select the operating mode.
Press AUD once and select the function you wish to adjust with the corresponding key. “Bass” and the current
setting, for example, will appear in the
top line of the display.
Use << / >> to alter the setting.
The last setting selected will be stored
automatically.
SUB-Out
If a SUB-woofers is connected to the
system, it is possible to adjust the output level with “SUB” and
/ .
To quit the AUD menu:
Press AUD or EXIT.
: DIS
Select from a number of displays
Radio operation
Press DIS repeatedly to select:
- the name of the station selected
- the current frequency
- PTY code
- clock
This will not operate properly unless
the radio is tuned into an RDS station
with adequate signal strength.
Press DIS for approx. 4 sec.:
to synchronise the clock (internal clock
with the DCF-77 atomic clock).
Tape deck operation
Press DIS:
- Tape side
- Clock
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
59
Quick Reference
CD changer operation
Press DIS:
- CD number, track number
- CD number (if entered)
- Clock
; Display
Radio operation
TP, TA - TP = Traffic Program (ra-
dio is tuned into a traffic
program station)
- TA = priority for traffic program stations is active
PTY - Program type is active
AF - Alternative frequency for
RDS
CC-IN - Cassette is in the tape
deck
< DOT field
Additional display for top line.
Radio operation
FM1, 2, 3,T - FM memory banks
or
MW, LW - Wavebands
or
Special pictures for a given situation,
e.g. driving cars during traffic announcements
Tape deck operation
CD changer operation
00:25 - Time (elapsed playing
time)
or
TRACK 3 - CD track number
= CDC
Switches to changer operation (only if
a changer is connected),
selects the menu levels.
If there is no CD changer connected,
this key will switch the system to AUX
if “AUX on” has been selected in the
INSTALL menu.
60
00:25 - Tape counter
or
Side A / B - Tape side
Quick Reference
> CC
Switches to tape deck operation
? TU (tuner)
Switches to radio operation, selects
the menu levels
@ Cassette slot
Insert a cassette (Side A or 1 facing
up; opening to the right).
A Visual theft protection
If you want to use the flashing LED to
deter thieves, make sure that
the car radio is installed correctly and
switched off;
the operating panel is opened;
the KeyCard has been removed;
LED is switched to on in the DSC
menu (default setting).
For more information, refer to the section on “DSC programming, KeyCard,
LED on/off”.
B KeyCard theft protection system
To operate this unit, the KeyCard must
be inserted.
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating panel, the operating panel will fold down
forward.
Slide the KeyCard in with the con-
tacts facing down (see illustration).
Lock operating panel back in place.
2
1
3
To remove KeyCard perform these
steps in the reverse order.
Make sure to read the information in
the section on the “KeyCard theft protection system”.
C Eject
Press the Eject button briefly, the cassette will eject.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion. When
you leave the vehicle, unlock the
panel and remove the KeyCard
to protect the equipment against
theft.
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
61
PORTUGUÊS
RC 08 remote control unit
21
20
23
D V- / V+
Volume control.
E SRC (Source)
Switches operating modes
Press SCR repeatedly to select.
- Radio
- Cassette
- Changer (if a changer is connected)
22
F <</>>, /
Radio operation
Station seek tuning
up
down
<</>> down/up in short intervals (for
FM only when AF is switched
off)
For FM only:
<</>> Pages through the station net-
work with AF on e.g.: NDR 1,
2, 3, 4, N-JOY, ... .
Tape deck operation
/ Select title (S-CPS)
Forward
Rewind
>> Fast forward
<< Fast rewind
CD changer operation
<</>> Select CD
>> up: Press briefly
<< down: Press briefly
/ Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly briefly
To restart the track: Press
briefly
REVIEW - fast reverse (audible): Hold pressed down
G
Sound mute on/off:
Press
been switched off “Mute” will appear in
the display.
Tape deck operation
To switch tape sound on/off:
Press
To switch tape sides:
Press
briefly. When the sound has
briefly.
for approximately 1 second.
62
Important notes
What you need to know
Before using your new car audio system,
please read through the following information carefully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
audio system in a way that could distract
you.
Please keep in mind that you travel a distance of 14 m per second at a speed of only
50 km/h.
Should the traffic situation become particularly demanding, we advise you not to use
the audio system.
Always make sure that you are still able to
hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, so that you can react accordingly.
Consequently, you should always select a
moderate volume for playing your car audio
system while you are driving.
Installation
If you would like to install your new car stereo yourself or add other audio components
to existing ones, then please read the in-
structions on installation and connection at
the end of this manual carefully.
Telephone mute
If you have installed a car telephone in your
vehicle, it is possible to automatically mute
the radio or CD playback when you use the
telephone (telephone mute).
“Phone” will then appear in the display.
Traffic announcements continue to have
priority if you have activated TA. You can
activate TIM when the system is switched
to telephone mute.
Accessories
Use only Blaupunkt-approved accessories
and spare parts.
You can use the following Blaupunkt products with this unit:
CD changers
The following CD changers can be connected directly: CDC A 06, A 071, A 072, A 08.
The A 05 can be connected with the adapter cable 7 607 889 093.
Amplifiers
All Blaupunkt amplifiers.
Guarantee
The scope of the guarantee is determined
by the laws in the country where the unit
was purchased.
Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. Your cash register receipt is a valid
guarantee coupon.
If you have any questions about the guarantee, please contact your dealer. He will
be happy to assist you, repair your equipment or forward it to an authorised Blaupunkt
repair shop. In addition, our employees are
there to help you on our service hotline.
You will find the telephone and fax numbers
on the last page of this manual.
International telephone information
Have you got any questions on the operation of this equipment or do you require more
information?
Give us a call!
You will find the international telephone and
fax numbers on the last page of this manual.
63
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Loading...