AIR PURIFIER
AIRPURE AP 2.0
Operating and Installation Instructions
CAUTIONS STRUCTURE & FUNCTIONS
Safety Notes
•
Do not clean or spill liquids or ammable
solvents on the device.
•
Clean with soft cloth only. Disconnect
AirPure before cleaning.
•
Handle with care. Do not drop. Keep it
away from electric & magnetic area.
•
Keep AirPure free of any object obstructing the air
ow.
•
Do not let children play with air purier.
•
Do not operate the device while driving.
•
Use the power cable provided only.
•
Do not wash the lter.
This manual may be updated from time to time without
any notice.
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
1
2 43
65
7
Functions
Touch Control (Power Button)
1.
Filter Replacement Reminder
2.
PM 2.5 Indicator
3.
Fan Speed Control
4.
Centrifugal Fan
5.
APF2 (Pre Filter, HEPA Filter, Activated Carbon Filter)
6.
PM 2.5 Sensor
7.
1 2
SPECIFICATION
Indicator Display : PM 2.5 Level, Filter Replacement Reminder, Auto/ Manual Fan Speed
•
Pre-packed with Blaupunkt AirPure Filter (APF2)
•
Noise Level : 55dB
•
Fan Type : Centrifugal Fan
•
HEPA Filter Grade : H13
•
Applicable for Space : 5m - 10m
•
Input Voltage : 5V
•
Current : 1A
•
Power : <7W
•
Dimensions : 200 x 150 x 55mm
•
Net Weight : 500g
•
Accessories : 4m USB Power Cable, Car Charger, Car Headrest Holder, Anti Slip Mat
•
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible
solutions. Consult Blaupunkt authorized dealer if problem persist.
Problems
Air purier does
not power on
Airow is
signicantly
reduced
Unusual noise
while operating
Possible Causes
Air purier is not connected to a power
supply.
Exceed lter replacement cycle.
Filter is not tted properly.
Solutions
Ensure the USB cable is properly connected to
USB power supply ports and air purier’s power
input.
Replace with new lter.
Refer to operation instruction for correct lter
replacement steps.
OPERATION INSTRUCTION
Air Purier
1.
Connect USB charger to the 5V/1A power supply input of Air Purier. Air purier will have buzzing sound and blue
illumination when turn on.
2.
Power Button
a) Turn On/O
• Press to manually turn on Air Purier, press again to manually turn o.
b) After Filter Replacement
• Press and hold for 5 seconds on the power button to reset lter replacement reminder.
3.
MODE Button
• The fan speed of air purier can be adjusted by pressing “MODE” button (Auto/L/H).
* Auto : Smart fan will adjust fan speed according to air quality
* L : Low fan speed
* H : High fan speed
Connect to a USB port
3 4
OPERATION INSTRUCTION
Filter Replacement
1.
Remove the cover of air purier.
2.
Remove the dirty lter and replace it with the new lter (APF2).
5
Designed and engineered by Blaupunkt Competence Centre 1 331 19 006 32 02
Loading...