Blancett B3000 Specifications

Page 1

Flow Monitor

B3000 Series

DESCRIPTION

The B3000 Series flow monitor is a flexible, durable, easy-to-use platform for your flow metering applications. Our trusted flow metering technology now offers a new flow monitor with more options and features than ever before with the B3000 Series.

OPERATION

This monitor is capable of accepting low-level frequency input signals typically found in turbine flow sensors. The output signal for these type of sensors is a frequency proportional to the rate of flow. The B3000 monitor uses the frequency information to calculate flow rate and total flow. Through the use of the programming buttons, you can select rate units, total units and unit time intervals among other functions. If required, the flow monitor can easily be reconfigured in the field. Finally, you can choose between simultaneously showing rate and total, or alternating between rate and grand total.

The monitor is available in three levels of functionality and two packaging options. The base model provides all the functions necessary for the most common flow metering applications. The advanced version adds communications capabilities over an RS485 bus using Modbus RTU and control outputs. The third version is a solar-powered model (NEMA 4X only).

Packaging options include a polycarbonate, NEMA 4X version and an aluminum explosion proof enclosure.

APPLICATIONS

The B3000 monitor is suitable for application in a wide variety of metering needs. A few of the more common industries are:

• Secondary oil recovery applications

• Remediation and reclamation

• Fracture/refracture

• Coal bed methane

• Regulatory compliance and environmental accountability

• Industrial chemicals

• Aggressive chemical processing applications

• Semiconductor manufacturing

• Fertilizer production and dispensing

• Pesticide manufacture

• Liquid batching and water cooling

FEATURES

• Robust alarm parameters provide faster warning when something changes in the process or pipeline.

• Greater control and greater visibility of batch operations.

• Advanced connectivity options allow you to connect meters to your network for remote monitoring and process automation capabilities.

• Solar, battery, and 4…20 milliamperes loop power options provide the ability to install in a remote location and be up and running immediately, maintain readings and settings during power loss, and a battery life up to 8 years.

• Updated display and totalization options provide more flow information, including simultaneous display of rate and total as well as standard, batch and grand totals.

• Various mounting and enclosure options provide a B3000 model for your operation.

DSY-DS-00691-EN-10 (November 2018)

Product Data Sheet

Page 2

Part Number Construction

PART NUMBER CONSTRUCTION

Blancett B3000 Display

Model

Blancett B3000 Display B30

Model

Base B

Advanced A

Solar S

Mounting

Meter M

Remote R

Swivel S

Units of Measure

Customer Selectable CS

Blancett B3000 Explosion-proof Display

Model

Blancett B3000 Explosion-proof Display B30

Model

Base, Explosion-proof*, Battery & Loop Power X

Advanced, Explosion-proof*, Battery & Loop Power Z

Mounting

Remote R

Units of Measure

Customer Selectable CS

*For hazardous locations, the monitor must be installed on an explosion-proof rated meter. To maintain compliance, kit P/N B280-737 for meter mounting is required.

DSY-DS-00691-EN-10Page 2 November 2018

Page 3

SPECIFICATIONS

COM

Specications

Display

Power

Inputs

Outputs

Modbus Digital

Communications

Data Configuration

and Protection

Common

Simultaneously shows Rate and Total 5 x 7 Dot Matrix LCD, STN Fluid 6 Digit Rate, 0.5 inch (12.7 mm) numeric

B30A/B/S

7 Digit Total, 0.5 inch (12.7 mm) numeric Engineering Unit Labels 0.34 inch (8.6 mm) 6 Digit Rate, 0.37 inch (9.4 mm) numeric

B30X/Z

7 Digit Total, 0.37 inch (13 mm) numeric Engineering Unit Labels 0.24 inch (6.1 mm)

Annunciators

Alarm 1(1), Alarm 2 (2), Battery Level ( ), RS485 Communications ( Auto switching between internal battery and external loop power; B30A/Z includes isolation between

B30A/B/X/Z

loop power and other I/O Battery 3.6V DC lithium D Cell gives up to 6 years of service life Loop 4…20 mA, two wire, 25 mA limit, reverse polarity protected, 7V DC loop loss

B30S

Internal battery (3.6V DC Nicd) provides up to 30 days of power after 6…8 hours exposure of the integrated photovoltaic cell to direct sunlight

Frequency Range

1…3500 Hz

Frequency

Magnetic Pickup

Measurement Accuracy

Over Voltage Protection

Trigger Sensitivity

±0.1%

28V DC

30 mV

(High) or 60 mV

p-p

(Low) - (selected by circuit board jumper)

p-p

Amplified Pulse Direct connection to amplified signal (pre-amp output from sensor)

Analog 4…20 mA 4…20 mA, two-wire current loop. 25 mA current limit

One pulse for each Least Significant Digit (LSD) increment of the totalizer

Totalizing Pulse

Pulse Type (selected by circuit board jumper)

Maximum Voltage

Maximum Current

Opto-isolated (Iso) open collector transistor

Non-isolated open drain FET

28V DC

100 mA

Capacity Maximum

Output

16 Hz

Frequency Pulse Width 30 mSec fixed

Open collector transistor Adjustable flow rate with programmable dead band and phase.

28V DC

100 mA

Status Alarms B30A/Z

Type

Maximum Voltage

Maximum Current

Pullup Resistor External required (2.2 k Ohm minimum, 10 k Ohm maximum)

Status Alarms

B30B/S/X

None

Modbus RTU over RS485, 127 addressable units / 2-wire network, 9600 baud, long integer and single

B30A/Z

precision IEEE754 formats; retrieve: flow rate, job totalizer, grand totalizer, alarm status and battery level; write: reset job totalizer, reset grand totalizer

B30B/S/X None

Two four-digit user selectable passwords; level one password enables job total reset only, level two

B30A/B/X/Z

password enables all configuration and totalizer reset functions

Not applicable on solar powered units.

)

DSY-DS-00691-EN-10 Page 3 November 2018

Page 4

Specications

B30A/B/S

Safety

B30X/Z

Certifications

Entity Parameters

EMC 2004/108/EC

Measurement

Accuracy

Response Time

(Damping)

Environmental Limits Common Limits –22…158° F (–30…70° C); 0…90% humidity, non-condensing

Materials and

Enclosure Ratings

Engineering Units

Common Accuracy 0.05%

Common Response

Time

B30A/B/S Polycarbonate, stainless steel, polyurethane, thermoplastic elastomer, acrylic; NEMA 4X/IP 66

B30X/Z Copper free, epoxy-coated, aluminum, buna seal, NEMA 4X/IP66

Liquid

Gas

Rate Time Seconds, minutes, hours, days

Totalizer Exponents 0.00, 0.0, x1, x10, x100, x1000

K factor Units Pulses/US gallon, pulses/cubic meter, pulses/liter, pulses/cubic foot

B30A/B only 4…20 mA Loop: Vmax = 28V DC Imax = 26 mA Ci = 0.5 μF Li = 0 mH

B30A/B/S only Pulse Output: Vmax = 28V DC Imax = 100 mA Ci = 0 μF Li = 0 mH

B30A/B/S only Reset Input: Vmax = 5V DC Imax = 5 mA Ci = 0 μF Li = 0 mH

B30A only RS485: Vmax = 10V DC Imax = 60 mA Ci = 0 μF Li = 0 mH

B30A/B/S only Turbine Input: Voc = 2.5V Isc = 1.8 mA Ca = 1.5 μF La = 1.65 H

1…100 seconds response to a step change input, user adjustable

US Gallons, Liters, Oil Barrels (42 US gallons), Liquid Barrels (31.5 US gallons), Cubic Meters, Million US Gallons, Cubic Feet, Million Liters, Acre Feet

Cubic Feet, Thousand Cubic Feet, Million Cubic Feet, Standard Cubic Feet, Actual Cubic Feet, Normal Cubic Meters, Actual Cubic Meters, Liters

Class I Division 1, Groups C, D; Class II, Division 1 Groups E, F, G; Class III for US and Canada. Complies with UL 913 and CSA C22.2 No. 157-92

Class I Division 1 Groups B, C, D; Class II, Division 1, Groups E, F, G; Class III for US and Canada Complies with UL 1203 and CSA C22.2 No. 30-M1986

ATEX II 2 G Ex d IIC T4 Gb and ATEX II D Ex tb IIIC T135 °C Db Complies with Directive 2014/34/EU

DSY-DS-00691-EN-10Page 4 November 2018

Page 5

MOUNTING STYLES

Meter Mount

• Monitor is assembled to the flow meter, creating a compact flow measurement system.

• NEMA 4X (IP 66) enclosure.

Remote Mount

• Ideal when monitor needs to be located away from flow meter. Suitable for high temperature, excessive noise or inaccessible areas.

• NEMA 4X (IP 66) enclosure.

• Panel, DIN rail, and pipe mounting hardware included.

• Cable lengths from 10…100 ft (3…30.5 m) sold separately.

Mounting Styles

Swivel Mount

• Capable of adjustment pivot of 180 degrees for ease of viewing.

• NEMA 4X (IP 66) enclosure.

• Remote Swivel mount also available, consult factory for details.

• Offers additional protection from elements.

Explosion Proof

• Ideal for hazardous locations.

• NEMA 4X (IP 66) enclosure.

• Rugged compact design.

• Remote or meter mount.

DSY-DS-00691-EN-10 Page 5 November 2018

Page 6

Dimensions

DIMENSIONS

Meter Mount

Remote Mount

A B C

4.50 in. (114.3 mm) 5.08 in. (129.0 mm) 4.78 in. (121.4 mm)

Explosion Proof

A B C

4.50 in. (114.3 mm) 5.08 in. (129.0 mm) 3.80 in. (96.5 mm)

A B C D E F

5.25 in.

(133.4 mm)

5.65 in.

(143.5 mm)

4.86 in.

(123.4 mm)

2.25 in.

(57.1 mm)

3.35 in.

(85.1 mm)

DSY-DS-00691-EN-10Page 6 November 2018

0.33 in.

(8.4 mm)

Page 7

Swivel Mount

Dimensions

A B C D E F

4.50 in. (114.3 mm) 10.9 in. (276.9 mm) 6.90 in. (175.4 mm) 3.21 in. (81.5 mm) 4.25 in. (107.9 mm) 7.00 in. (177.8 mm)

DSY-DS-00691-EN-10 Page 7 November 2018

Page 8

Flow Monitor, B3000 Series

ACCESSORIES

Part Number Description

B280-737 Explosion-proof Meter Mount Kit, 1 in. connections

B280-742 Explosion-proof Meter Mount Kit, 1/2 in. connections

Meter Mounting Kits

Turbine with 1 in. NPT hub size Turbine with 1/2 in. NPT hub size

Control. Manage. Optimize.

Blancett is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specications without notice, except to the extent an outstanding contractual obligation exists. © 2018 Badger Meter, Inc. All rights reserved.

www.badgermeter.com