Blackweb BWA18AV007 User Manual
6-Device
User Guide
v1.5 (2017)
BWB17AV002
• GETTING STARTED BATTERIES
• GETTING STARTED BUTTONS
• PROGRAMMING YOUR REMOTE DIRECT CODE ENTRY
• PROGRAMMING YOUR REMOTE AUTO CODE SEARCH
• FAVORITE CHANNELS
• VOLUME LOCK
• CHANNEL LOCK
• CODE IDENTIFICATION
• RESET TO FACTORY DEFAULT SETTINGS
• TROUBLESHOOTING
• FCC INFORMATION
• LIMITED 90DAY WARRANTY
02
03
05
08
09
10
11
12
13
14
15
16
TABLE OF CONTENTS
01
Thank you for choosing the Blackweb Universal Remote Control. This remote
control can operate a wide range of electronic devices, works across most
brands and models, and comes pre-programmed to operate many Samsung
TVs (see the Programming Your Remote sections if your device is not
compatible). Your remote can control up to 6 devices and is remarkably
easy to set up. To get started, please install two AAA alkaline batteries (not
included) as shown below.
Installing the Batteries
1. Remove the battery cover.
2. Insert the batteries as shown.
3. Snap the battery cover back into
place.
Battery Precautions
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Always remove old, weak or worn-
out batteries promptly and recycle
or dispose of them in accordance
with local and national regulations.
Low Battery Indicator
If while using the remote, the
button’s red indicator light flashes
3 times, this indicates the batteries
need to be replaced. Please replace
the batteries as soon as possible
when this indication occurs.
Code Saver
When changing the batteries of your
remote, please do so quickly. You
have up to 20 minutes to change the
batteries in your remote without
losing the programmed codes.
Battery Saver
To conserve battery power, the remote will automatically turn off if any
button is pressed for more than 60 seconds (except during programming).
This feature is helpful in the event that the remote is stuck in a location
where the buttons remain depressed, such as between sofa cushions.
GETTING STARTED BATTERIES
Battery Cover
Your remote control’s model number
can be found in the battery compartment
Two AAA
alkaline
batteries
(not included)
Model: BWB17AV002/PCL-1
Customer Support: (877) 907-7010
Made in China
02
NOTE: Some of the buttons on the remote may not support all of the functions
of the original device remote.
GETTING STARTED BUTTONS
AMP
PROGRAM
AUX
INPUT
FAV
ENTER
1 2 3
4 5 6
7 8
0
9
+ +
CH
SAT/CBL STREAMTV
BRAY/DVD
SLEEP
VOL CH
MENU
BACK
APPS
EXIT
OK
POWER INPUT
DEVICE
CATEGORIES
SLEEP
PROGRAM
MENU
APPS
NAVIGATION OK
BACK
EXIT
A, B, C, D
BUTTONS
A B C D
VOLUME
CHANNEL
MUTE
INFO
PREVIOUS
CHANNEL
VIDEO
PLAYBACK
CONTROLS
NUMBER
KEYPAD
FAVORITE
CHANNELS
03
TV
BRAY/DVD
SAT/CBL
AMP
STREAM
AUX
POWER
Turns your device On/Off and also serves as an
indicator when the remote is being programmed
INPUT
Switches between the sources connected to your TV
DEVICE CATEGORIES
Use these buttons to select the device you want
to control
SLEEP
Activates and toggles the device’s sleep timer
(if supported)
PROGRAM
Use to put your remote in programming mode
APPS
Use to access your smart TV’s apps (if supported)
BACK
Return to the previous menu or screen
A, B, C, D BUTTONS
Use to access device shortcuts for additional
features or custom apps on your device (if supported)
INFO
Use to access on-screen content description and
information
GETTING STARTED BUTTONS
PROGRAM
INPUT
SLEEP
BACK
A B
C D
APPS
04
Press and hold the button
until the button lights up red.
The button’s red indicator light
remains on.
Programming your remote is as easy as 1, 2, 3
Before beginning, please make sure that the device you want to control
is powered on and follow these three simple steps.
NOTE: Press to exit at any time.
NOTE: The Blackweb universal remote comes pre-programmed to operate
many Samsung TVs.
PROGRAMMING YOUR REMOTE DIRECT CODE ENTRY
1.
AMP AU X
SAT/CBL STREAMTV
BRAY/DVD
INPUT
FAV
ENTER
1 2 3
4 5 6
7 8
0
9
+ +
CH
SLEEP
VOL CH
MENU
BACK
APPS
EXIT
OK
PROGRAM
PROGRAM
PROGRAM
Red indicator light
05
Loading...