Blackweb BWA15AA003 User Manual

Location of Controls

Charging the Headphones

TM/MC

Bluetooth Headphones

USER GUIDE

BWA15AA003

Micro

Bluetooth Headphones

Bluetooth Headphones

USER GUIDE

BWA15AA003

1. Plug the small end of the Micro USB charging cable into the Micro
USB charging port on the headphones.

2. Plug the large end of the Micro USB charging cable into a USB port
on your computer or other USB charging device.

3. The LED Indicator light is RED when charging and turns BLUE when
the headphones are fully charged.

NOTE: When battery power is low, a ”battery Low” reminder will be
heard every 20 seconds. This voice prompt will continue until all power
is depleted or the Micro USB charging cord is connected. Make sure

that you charge the headphones for at least 8 hours before using

[ ] Power/Answer Button



LED indicator light



TM/MC

TM/MC



[ / +] Button

· long press - skip to next song

them for the rst time.

To conserve power, If the headset is not connected to a device for
approximately 10 minutes, the headphones will turn o automatically.

· quick press - increase volume



[ - / ] Button:

· long press - skip to previous song

· quick press - decrease volume

Micro USB charging port




3.5mm auxiliary port

Microphone



For iPhone users: An
additional battery meter
feature will be activated
and the remaining battery
capacity of the head­phones will display on
your phone’s toolbar.

Pairing the Headphones

1. Press and hold the [ ] button for approximately 7 seconds.
The LED Indicator light will ash RED and BLUE.

2. The Headphones are now in pairing mode and ready to be connected
to your device.

3. Keep the headphones and Bluetooth enabled device within 3 Feet of
each other during the pairing process.

4. Set your Bluetooth enabled device to search for Bluetooth devices.

5. When your Bluetooth enabled device nds the Headphones, select
“BW BASS DYNAMIX” from the list of found devices

6. If required, enter the password 0000. Select OK or YES to pair the two
units.

7. After a Successful registration, the LED Indicator light will slowly blink
BLUE.

On an iPhone

• Go to SETTINGS > BLUETOOTH (Make sure Bluetooth is turned ON)

12:12 PM

Bluetooth

Bluetooth

Devices

BW BASS DYNAMIX

ON

Paired

Now discoverable

3.5mm Auxiliary Cable

On an Android Phone

• Go to SETTINGS > BLUETOOTH > MENU > Search for devices
(Make sure Bluetooth is turned ON)

Bluetooth settings

Bluetooth

Device name

BW BASS DYNAMIX

Visible

Make device visible

Search for devices

Bluetooth devices

On other Cell Phones/Devices

• Review the instruction manual that came with your
phone/device.

Bluetooth: Enabled

Paired Devices:

*Empty *

Searching for devices

1 f

Stop

12:12 PM

Scanning

ound

Playing Music

(see “Location of Controls”)

1. [ ] Button – Quick Press to play or pause the current
song.

2. [ / + ] Button – Long Press to skip to the next track.

3. [ - / ] Button – Long Press to skip to previous track.

To increase or decrease the volume, Quick press the [ / + ] or [ - / ]
buttons.

Using the Headphones

1. Dialing last number called – To dial the last number called, double
press the [ ] Button.

2. Answering call – Quick Press the [ ] Button to answer an
incoming call.

3. Ending a call – Quick Press the [ ] utton again to end the call.

4. Rejecting a call – Press and hold the [ ] button for 2 seconds.

5. Quick Press the [ / + ] and [ - / ] Buttons to raise and lower the IN
CALL volume.

6. Transferring a call – Press and hold the [ / + ] Button for 3 seconds
to transfer the call between your phone and the Bluetooth
headphones.

7. Call Waiting – To answer an incoming call while a phone call is in
progress, Press the [ ] Power Button for 2 seconds to place the
current call on hold and accept the incoming call.

8. Mute – Press and hold the [ - / ] Button for 3 seconds. Press and
hold the [ - / ] Button again for 3 seconds to return to your call.

Pairing the Headphones with a 2nd Mobile Device

The BWA15AA003 supports a Multi-Connect function that allows the
headphones to pair with two mobile devices at the same time. To
connect a second Bluetooth enabled device to your headphones, please
follow these steps below:

1. Make sure that the Headphones are connected to the rst device
(refer to “PAIRING THE HEADPHONES”).

2. Now power the Headphones OFF.

3. Press and hold the [ ] Button for approximately 7 seconds
until the LED Charging Indicator light ashes RED and BLUE. The
headphones are now in pairing mode.

4. Set the second mobile device to search for Bluetooth devices.

5. When the second mobile device nds the headphones , select
“BW BASS DYNAMIX” from the list of found devices.

6. If required, enter the password 0000. Select OK or YES to pair.

7. After a successful registration, the LED Indicator light with slowly ash
BLUE.

8. On the first connected device, go to Bluetooth settings and select
“BW BASS DYNAMIX” to reconnect to the headphones.

9. You are now connected to both devices.

Device 1

Device 2

Playing music or media when two phones are paired

When using the Multi-Connect function, both mobile devices can make
and receive phone calls. However, media will only play from one device. In
order to play media from the other device, unpair both devices then pair
them in the opposite order.

Redialing the last number called when two phones are paired

If two phones are paired and you redial a number (press the [ ] button
twice quickly) the headphones will choose the phone which was
connected first to call from. The second phone connected will not
respond.

Switching between two calls when two phones are paired

While on a live call with one phone and the other phone rings with an
incoming call, quick-press the [ ] button to answer the second phone.
The first phone will terminate the call.

Limited Warranty

In the unlikely event that this product is defective, or does not perform properly, you may within Six (6) Months from your
original date of purchase return it to the authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE:

•

Call the Customer Support number located below, or go to our website portal to receive an SRO return number.

•

Provide proof of the date of purchase within the package (Dated bill of sale).

•

Prepay all shipping costs to the authorized service center, and remember to insure your return.
Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within

•

the package.

•

Describe the defect or reason you are returning the product.

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if exami
the service center determines this product is defective. Products received damaged as a result of shipping will require

The shipping address of the authorized service center is:

Attention: Customer Service (2nd Floor)

Should you have any questions or problems concerning this product, please contact our customer service department at:

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of

alters or repairs this product. All products being returned to the authorized service center for repair must be suitably
packaged.

Limitation of Warranty:

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUC T. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY SOUTHERN TELECOM, INC., IT’S
AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.

• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
SOUTHERN TELECOM, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long

legal rights, and you also may have other rights that vary from state to state.

Southern Telecom, Inc.

14-C 53rd Street

Brooklyn, NY 11232

Customer Support:

Phone: [phone] (Toll Free)

Or via the web:

www.southerntelecom.com

Click on “Product Support”

nation by

Legal Information

Caution: Any changes or modications not expressly approved could void the user's authority to

operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

· Consult the dealer or an experienced radio/TV technician for help.

Manufactured by Southern Telecom, Inc.

Distributed by
Wal-Mart Stores, Inc.
Bentonville, AR 72716

Printed in China

-