BLACKVUE LCD
Table of Contents
Introduction to the Manual
Getting Started
Checks for the External GPS 8
Checks for the microSD Card 8
Management During Summer Season 9
Product Features 9
Package Components 10
Name of Each Part 11
Attach & Detach the Mounting Holder
of the Front View Camera 13
Attach & Detach the Mounting Holder
of the Rear View Camera 13
Install the BlackVue
Insert & Remove the microSD Card 15
Installation 16
Cautions for Safety 5
Checking Installation Position 14
4
Video Recording
Parking Recording 18
Event Recording 19
Emergency Recording 19
Simple Video Playback
Playback Using a microSD Card 21
Playback Using the BlackVue App 23
Using the BlackVue
Settings 25
Using the BlackVue
Viewer
Settings 39
Normal Recording 18
Playback in BlackVue 20
Switch to Live View 25
Screen Description 31
Video Playback 33
Firmware Upgrade
Product Specifications
& Standards
Recording Time 48
Product Specications 45
LED Indicators 47
BLACKVUE LCD I 3
44
Introduction to the Manual
Thank you for purchasing this product manufactured by Pittasoft Co., Ltd.
This document contains information on how to operate this product. Before using the product, make sure to read through this document so as to use the product properly. In
order to enhance the performance of the product, the contents of this document may be changed without prior notice.
Warranty & Support
y
This product records and saves videos on vehicle accidents; however, it is not
guaranteed to record all accidents. Accidents with a light impact that is not
enough to activate the impact detection sensor may not be recorded.
y
In accordance with Personal Information Security Law & related acts, Pittasoft
Co., Ltd. is not accountable for any issues or problems due to the illegal use of
this product.
y
A video recorded by this product constitutes the secondary data that may
help to determine the circumstances of an accident. Pittasoft Co., Ltd. is not
accountable for any loss or damage caused by an accident.
4
Copyright & Trademark
y
This document is protected by the Copyright Act, and legal protection is
guaranteed to all rights.
y
It is prohibited to reproduce, copy, modify, or translate this document without
permission.
y
Pittasoft Co., Ltd. reserves the rights regarding all works related to the BlackVue
brand such as product design, trademarks, and product-promotional images. It
is prohibited to reproduce, copy, or use related works without the permission of
Pittasoft Co., Ltd. Any violation may be penalized in accordance with the relevant
regulations.
BlackVue is a registered trademark of Pittasoft Co., Ltd.
Getting Started
The purpose of these cautions is to maintain user safety and to avoid damage to property. Please make sure to read through this document so as to use the product properly.
Cautions for Safety
Danger
y
Do not disassemble, repair, or alter the product yourself.
It can cause re, an electric shock, or malfunction. For internal inspection and
repair, call your customer service center.
y
If any foreign matter gets inside the product, detach the power cord right
away.
Call the customer service center for repair.
y
Do not operate the product while driving.
It can cause an accident. Stop or park your car in a safe place to operate it.
y
Do not install the product where it can interfere with the driver's vision.
It can cause an accident.
Death or property damage can be caused for users if the following directions are not followed:
y
Do not use a damaged or altered power cord. Use the cords provided by the
manufacturer.
Otherwise, it can cause an explosion, re, or malfunction.
y
Do not operate this product with wet hands.
It can cause an electric shock.
y
Do not install it in a place with high humidity, or combustible gases or
liquids.
It can cause an explosion and re.
BLACKVUE LCD I 5
Warning
Death or serious injury can be caused for users if the following directions are not followed:
y
Do not leave the product where infants, children, or pets can reach it.
They might swallow small components, or their saliva could get into it and cause
an explosion due to a short circuit.
y
While cleaning the inside of the car, do not spray water or wax directly onto
the product.
It can cause re, an electric shock, or malfunction.
y
If smoke or an unsual smell is emitted from the power cord, detach it
immediately.
Call the customer service center or the reseller.
y
Keep the terminal of the power cord clean.
A dirty terminal can cause excessive heat and re.
6
y
Use the correct input voltage.
Otherwise, it can cause an explosion, re, or malfunction.
y
Connect the power cord rmly so that it cannot easily be disconnected.
Otherwise, it can cause re.
y
Do not cover the product with cloth or blanket.
It can cause the external deformation of the product or re. Use the product and
peripherals in a place where ventilation is ensured.
Caution
Injury or property damage can be caused for users if the following directions are not followed:
y
Do not spray a detergent directly onto the exterior of this product.
It can discolor or have a crack. Also, the product can have an error.
y
If the product is used outside the optimal temperature range (0C ~ 60C),
performance can degrade or malfunction can be caused.
y
Check if this product has been properly installed.
The product can have malfunction by being dropped due to vibration, or you can be
injured.
y
While entering or exiting a tunnel, at a daytime in the face of bright
sunlight, or at dark night with no light, the quality of a recorded video can
deteriorate.
y
If the product is damaged or the power supply is cut due to an accident, a
video may not be recorded.
y
Excessively tinted windshield glass can distort the recorded video or cause
it to be indistinct.
y
Prolonged use of the product can increase the interior temperature and
cause burns.
y
Since microSD cards are consumables, replace them with new ones after
prolonged use.
If a microSD card is used for a long period of time, a video may not be properly
recorded. Thus, check regularly if recording is being properly done. If not, replace
the card with a new one.
y
Clean the lens on a regular basis.
If the lens is not clean, it may aect recording.
y
While data are being saved into the microSD card or the card is reading
data, do not detach the card.
The data may be damaged or malfunction caused.
y
It is recommended to install this product at the installation spot. The
installation spot can be checked from the website of BlackVue (www.
blackvue.com).
y
When this product does not need to be used for a long period of time, it is
recommended to detach the power cord.
y
Do not press the LCD screen with a sharp or pointed object.
y
Do not press the LCD screen too rmly.
y
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
BLACKVUE LCD I 7
Checks for the External GPS
Checks for the microSD Card
Even if the GPS isn’t working the video is recorded, but position coordinates and
driving speed are not recorded. When used for the rst time, or when the product
is not used for three consecutive days, it will take some time for GPS to find the
current position.
If the recorded video is checked using a viewer program, or the BlackVue
application, and an error occurs with the GPS time, it is recommended to turn on
and o the power after a GPS signal is received.
Comply with the following for an uninterrupted GPS signal:
y
Do not have the windshield glass tinted with a metallic component.
y
Be careful with the installation of devices that may interfere with GPS reception
(e.g. some wireless starters & alarms and MP3/CD players).
y
Do not use the product simultaneously with other devices that use GPS signals.
y
Cloudy weather can interfere with GPS reception.
y
GPS reception can be poor when driving under overpasses or in tunnels,
underpasses, streets with skyscrapers or high rise buildings, generating stations,
military bases, or broadcasting transmitters, etc
8
Refer to the following for trouble-free use of microSD card:
y
It is recommended to format it on a weekly basis.
y
If the recorded video breaks up, format the microSD card.
y
In order to ensure the reliable use of the card, format the card by using the
official program recommended by the SD Card Association. For detailed
information, see the website of BlackVue (www.blackvue.com).
y
Before formatting it, copy important les to other storage media.
y
The microSD card can be formatted in BlackVue without connection to a PC.
(Page 30)
y
Insert the formatted microSD card into the product. Then, the microSD card will
be automatically initialized and the rmware installed on it.
y
Insert or remove the microSD card only when the product is turned o.
y
MicroSD cards are consumables, and warranted for six months.
y
If a microSD of another company is used, a compatibility issue may occur.
Therefore, you must use the original microSD card from Pittasoft Co., Ltd.
y
If Power Magic Pro, a continuous power supply unit, is used, the microSD
may not be able to be used for a long period of time.
y
If a 64GB microSD card needs to be used, format it using BlackVue Viewer and
insert it into the product. (Page 31)
Management During Summer Season
y
Park in a shady place or an indoor parking lot.
y
If an outdoor parking lot is used, park away from direct sunlight. Also, open the
window by 1 or 2 cm.
y
If the product is exposed to direct sunlight, cool the product down for a specic
amount of time before use.
y
During summer, the temperature inside the vehicle may rise to 80°C-90°C due to
sunlight. Keep the inside of the vehicle at an appropriate temperature.
Product Features
Full High Denition and Smooth Image
This product allows you to record front view, at full high denition
and rear view high denition videos, to ensure smooth images.
Real-Time Image Check Due to Touch LCD
This product enables the PIP feature, which allows you to easily
operate, using the 4.0” touch LCD; and view front and rear view
screens simultaneously.
Automatic Power-O at High Temperature
Due to the built temperature detection sensor, once the black
box reaches a high temperature, automatic power supply will be
suspended to protect the product.
Prevention of Electric Drainage in Batteries for the Vehicle
Once the power is below the current value set in the product,
automatically power supply will be stopped to prevent the batteries
for the vehicle from drainage.
BLACKVUE LCD I 9
10
SONY EXMOR CMOS Sensor
Due to the SONY image sensor that ensures excellent image quality,
clearer identication is ensured during the day and night
Coaxial Cable For Excellent Data Transfer
For reliable data transfer, high quality coaxial cables are used to
prevent missing data and data loss.
High Denition Wide-Angle Lens
Using a high denition wide-angle lens, accidents can be accurately
recorded.
Premium Design
BlackVue is designed with stylish and sophisticated premium micropatterns.
Diverse Recording Modes
Four diverse recording modes according to user convenience (e.g.
Emergency/Normal/Event/Parking)
Package Components
Front View Camera Manual
Power Cable Cable Clips (8 EA)
microSD Card Reader Rear View Camera
Double-Sided Tape
for the Mounting Holder
Rear View Camera Connection Cable
microSD Card
(BlackVue Viewer and User Guide
Included)
Note
y
Pictures of the components may dier from the actual.
y
To enhance the performance of the product, the components may be
changed without prior notice.
y
The additional package components and parts sold separately can be
purchased from the website of BlackVue (www.blackvue.com).
Name of Each Part
Front View Camera
V in
(Terminal for
Connecting to the
Rear View Camera)
DC in (Power Terminal)
Camera Angle Control Bolt
Mounting Holder
Camera Lens
BLACKVUE LCD I 11
Mounting Holder
Detachment Button
GPS
(External GPS Terminal)
Rear View Camera
Mounting Holder Camera Lens
microSD Card Slot
Wi-Fi LED
GPS LED
REC LED
Power Button
• Pressing Short: Starts and stops voice recording.
• Pressing Long: Turns on or o the power.
Note
y
The external GPS is sold separately.
12
LCD Screen
V out
(Terminal for
Connecting to
the Front View
Camera)
Rear Security LED
Attach & Detach the Mounting Holder of the Front View Camera
Press the mounting holder detachment button and pull the front view
1
camera.
Push the front view camera into the mounting holder to assemble the
2
mounting holder to front view camera.
Attach & Detach the Mounting Holder of the Rear View Camera
Hold the mounting holder, and pull the rear view camera.
1
In order to assemble the mounting holder of the rear view camera, push the
2
rear view camera into the mounting holder until a clicking sound occurs.
BLACKVUE LCD I 13
Install the BlackVue
Checking Installation Position
It is recommended to install the front view camera next to the room mirror.
1
Clean any foreign substances and moisture from the place where the product will be installed with a dry cloth.
14
It is recommended to install the rear view camera at the higher part of the
2
back window.
Note
y
Do not install the product where it can interfere with the driver's vision.
y
It is recommended to install the product at the spot specied.
Insert & Remove the microSD Card
Insert the microSD card into the microSD card slot, of the front view camera,
1
in the direction as shown in the gure below:
In order to detach the microSD card, gently push the center of the microSD
2
card with your thumb and pull out the card. Make sure that the microSD
card does not spring out when detaching the card.
Caution
y
Do not remove the microSD card while it is saving or reading data. This
may cause data damaged or malfunction.
y
Copy important data to other storage medias. Pittasoft Co., Ltd. is not
accountable for data loss resulting from carelessness.
Note
y
Insert or remove the microSD card only when the product is turned o.
y
MicroSD cards are consumables. Replace them with new ones after
prolonged use.
BLACKVUE LCD I 15
Installation
In a bright and safe place, stop the vehicle engine and pull out the vehicle
1
key.
Attach the front view camera on the vehicle windshield glass with double-
2
sided tape.
16
Attach the lens of the rear view camera on the vehicle’s back window with
3
double-sided tape, so that the lens can also be placed at the center of the
vehicle.
Connect the V in terminal of the front view camera to the V out terminal
4
of the rear view camera by using the cable for connecting to the rear view
camera.
Use the power cable to connect the DC in of the front camera to car’s power
5
socket.
Note
y
It is necessary to use Power Magic (the Battery Discharge Prevention
Device) to record video while the car is parked.
y
To use BlackVue with other equipment that uses a power cable, purchase
and use a dual power outlet adaptor.
Organize the cables, using the cable clip, to prevent the driver's vision from
6
being interrupted.
Start-up of the vehicle, then check if the product is properly operating.
7
Adjust the camera angle to view the LCD screen. Slightly unfasten the cam-
8
era angle control bolt to adjust the angle; then fasten the bolt. Even if the
prop is detached, the camera angle can be maintained. Thus, the camera
can be installed at the same lens angle as before.
Caution
y
Do not remove the microSD card while it is saving or reading data. This
may cause data damaged or malfunction.
y
If BlackVue is used for the rst time, set time in Settings rst. (Page 29)
Note
y
After a test drive, check if the video has been properly recorded.
y
The recorded video is saved in MP4 format.
PLEASE CONNECT REAR CAMERA FIRST BEFORE CONNECT THE POWER
CORD ON FRONT CAMERA.
BLACKVUE LCD I 17
Video Recording
Normal Recording
Parking Recording
Once you start the vehicle engine, the BlackVue will automatically power
1
on.
When the BlackVue is powered on, the normal recording will automatically
2
start. The video can be checked from the LCD screen.
18
When in normal recording mode, if the vehicle does not move for five
1
minutes or longer, the mode will automatically switch to parking recording
mode.
In parking recording mode, if camera motion or vehicle impact is detected,
2
event recording will start.
Note
y
If a le is recorded in parking recording mode, a message will appear on
the LCD screen when the mode switches to normal recording mode.
Event Recording
Emergency Recording
During normal recording mode or parking recording mode, if an impact to
1
the vehicle is detected, event recording will start. 10 seconds before impact
to the vehicle will also be recorded.
Note
y
The degree of sensitivity, which impact detection sensitivity, can be set
in Settings. (Page 29)
Press the on the LCD screen to record the desired image. The
1
recorded le will be saved in the form of an event recording le.
Note
y
Up to ten emergency recorded les can be saved. If more than ten les
are recorded, the older les will be deleted in chronological order.
y
The emergency recording file can be recorded depending on the file
unit setting. (Page 27)
y
The emergency recording cannot be interrupted during recording.
BLACKVUE LCD I 19
Simple Video Playback
Playback in BlackVue
You can directly check recorded videos from the LCD screen.
Press on the LCD screen. A list of recorded videos will appear.
1
From the list, select the recorded video you want to play back.
2
20
Note
y
When playing back a video, a video recording cannot be made using
BlackVue.
Playback Using a microSD Card
Playback Using a Smartphone
With a Smartphone that supports microSD cards, a video can be viewed.
Turn o the power of this product, and detach the microSD card.
1
Note
y
For details on how to detach the microSD card, refer to Insert & Remove
the microSD Card. (Page 15)
Insert the microSD card into the Smartphone.
2
Run the application for video playback, and select the video you want to play
3
back.
Note
y
A method for playing back recorded videos may dier depending on the
type of Smartphone; therefore refer to your User's Guide for details.
y
If there are numerous recorded videos in the microSD card, it may take a
long time to load the le.
Playback Using a GPS Navigation
Recorded videos can be played back using GPS navigation.
Insert the included microSD card into the microSD card reader.
1
Connect the microSD card reader to navigation.
2
Run the video playback program, and select the recorded video you want to
3
play back from the removable drive.
BLACKVUE LCD I 21
Note
y
A method for playing back recorded videos may differ depending on
navigations. For details, refer to the User's Guide on Navigations.
y
If there are many recorded videos in the microSD card, it may take long
to load a le.
y
Some navigations do not enable full HD video playback.
22
Playback Using a PC
Recorded videos can be checked immediately, using the video playback PC
program.
Insert the included microSD card into the microSD card reader.
1
Connect the microSD card reader to navigation.
2
Run the video playback program, and select the recorded video you want to
3
play back from the removable drive.
Playback Using the BlackVue App
Wi-Fi is required to play back a video via BlackVue application. For a model that does
not enable Wi-Fi, insert the microSD card into a Smartphone to play back a recording.
Install the BlackVue application in a Smartphone, and run the application.
1
The BlackVue application can be downloaded from Google Play Store, Apple
App Store, or Windows Store.
Note
y
The BlackVue application is enabled in Android 2.3 or higher, iOS 5.0 or
higher, or Windows 8.0.
y
Some features may not be enabled depending on the type of
Smartphone.
y
The BlackVue application is optimized for iOS 7.
Press Wi-Fi ON on the LCD screen to enable Wi-Fi.
2
Touch the Wi-Fi button of the BlackVue application. Select the device you
3
want to connect, and enter the password. (E.g. DR750LW-A682DE) Touch
the OK button to connect to the selected device. The initial password is
blackvue, but the user can change it.
BLACKVUE LCD I 23
Note
y
If information on Wi-Fi connection is saved, touch the Wi-Fi button
of the BlackVue application, without enabling the Wi-Fi feature of the
Smartphone, to automatically connect to Wi-Fi.
y
For the Live View function, Wi-Fi can be used within a 10m range,
although the range may vary depending on the circumstances during
use
y
When playing back recorded videos using Wi-Fi, the reception may vary
according to the data transfer rate.
y
For details on Wi-Fi settings, refer to Wi-Fi and Other Settings. (Page
42)
y
Wi-Fi will automatically disabled 10 minutes after not being in use. This
cannot be changed.
Select the recorded video you want to play back from the list of recorded
4
videos.
24
Note
y
Press the Live View button to check a video in real-time.
y
If Live View or the VOD playback & copy functions are used by
connecting to Wi-Fi while recording at full HD (1920x1080) @30 fps, the
recording frame will be reduced to 20 fps.
y
For detailed information on the BlackVue application, refer to the Manual
on the BlackVue Application. The manual can be downloaded from the
website of BlackVue (www.blackvue.com).
Using the BlackVue
Switch to Live View
Settings
The front/rear screen recordings in this product can be checked in real-time.
Press on the LCD screen. If the screen is turned o, press the LCD screen
1
to turn on the screen. Then, press
Whenever is selected, Live View will appear.
2
Front + Rear PIP Front Screen Rear Screen
.
A setting can be changed in BlackVue. Press on the LCD screen.
Note
y
When selecting settings, no videos can be recorded in BlackVue.
y
After changing a setting, you must save the changes.
y
If a setting is changed in BlackVue, the setting cannot be changed using
the BlackVue application.
Screen Settings
BLACKVUE LCD I 25
Item Description
Screen Bright The brightness of the LCD screen can be adjusted.
Screen On Time The waiting duration of the LCD screen can be set.
Switch to the Rear
Touch revision
The direction of a rear view camera video can be
changed. The actual file is recorded in the forward
direction.
If touch revision is required on the LCD screen, this
option is available.
26
Video Settings
Item Description
Resolution The resolution of a recorded video can be set.
Front Bright The brightness of a recorded video can be set.
Audio Settings
Recording Settings
Item Description
Voice Recording Voice recording can be enabled or disabled.
Alarm Volume The BlackVue voice alarm volume can be adjusted.
Note
y
Press the Power button briey to enable or disable voice recording.
Item Description
Normal Recording Enables or disables normal recording mode.
Date/Time Display
Speed Unit Display Changes the speed unit recorded in a video.
File Unit Changes the unit of saving a recorded video.
P Mode Auto Switch Enables or disables automatic shift to parking mode.
Turns on or o the date and time display recorded in a
video.
BLACKVUE LCD I 27
Note
y
If Normal Recording and P Mode Auto Switch are set to OFF, only
event recording videos will be saved.
28
System Settings
Item Description
Reset Settings Initializes settings.
Wi-Fi Info.
Language The language can be checked.
System Info. The model name and rmware version can be checked.
Timezone
Wi-Fi connection information (e.g. SSID and password)
can be checked.
The time zone can be checked. The time zone setting is
used as information on a recorded video.
Time Settings
The current time and time zone can be set. If an external GPS is connected, the time
will be automatically set according to the time zones.
Note
y
The time zone can be changed in the BlackVue Viewer. (Page 39)
y
The time can be synchronized with the smartphone by pressing
Settings > Firmware > Auto Sync on the BlackVue App.
Sensitivity Settings
Item Description
Normal Mode
Parking Mode
In Normal recording mode, the impact sensitivity can
be set when switching to event recording mode.
In parking recording mode, the impact sensitivity can
be set when switching to event recording mode.
BLACKVUE LCD I 29
Power Settings
Item Description
The minimum operating voltage can be set. In park-
Min. Working Volt
Battery Save Mode
ing recording mode, once the vehicle battery voltage
reaches under the setting value, the power supply will
stop automatically to prevent battery from drainage.
Battery save mode time can be set. In order to prevent
the vehicle battery from drainage, power supply automatically stops after a set period of time.
Note
y
It is necessary to use Power Magic (the Battery Discharge Prevention
Device) to congure the power settings.
30
SD Card Formatting
The microSD card can be formatted or a format cycle message can be set. If a format
cycle message is set, a message will appear in the cycle when this product is turned
on.
Using the BlackVue Viewer
Screen Description
Double-click the BlackVue Viewer icon in the microSD card to run BlackVue Viewer.
In order to install BlackVue Viewer on the PC, connect to the BlackVue website (www.
blackvue.com) and download it.
32
4
5
1
6
8
7
No. Name Description
Recorded
Video Playback
1
Window
Language
2
Setting
microSD Card
3
Formatting
G-Sensor
4
Information
GPS Information
5
Videos can be played back using this window. The
screen can zoom in/out by using a mouse.
If you change the language on playback screen, the
language for BlackVue Viewer can be changed. For
details about language configuration for BlackVue,
refer to the Basic Settings. (Page 39)
The microSD card connected to the PC can be
formatted.
G-sensor information of video recording can be
conrmed.
GPS information when the video was recorded can be
checked.
BLACKVUE LCD I 31
No. Name Description
Using the file list and map tab, the recorded video list,
including recording location can be conrmed.
Click Front to display only rear view camera les in the
recorded video list. Click Rear to display only front view
Recorded Video
6
List
Timeline
7
Playback Option
8
Button
camera les in the recorded video list.
: This is an normal recording file and marked
with green in the timeline.
: This is an event and emergency recording le
and marked with orange in the timeline.
: This is a parking mode recording file and
marked with blue in the timeline.
Videos can be searched by date, hour, minute, or
second of video recording.
For detailed information about Timeline, refer to
Timeline. (Page 34))
While playing back recorded video, the screen,
playback speed, and volume can be adjusted. For
detailed information regarding playback option
button, refer to Playback Control
32
. (Page 33))
Note
y
In order to save GPS information while recording a video, connect an
external GPS to BlackVue.
Video Playback
Playback Control
A recorded video can be played back in full screen mode or reversed upside down.
The playback speed can be adjusted to fast forward the video.
Play Previous File
View Upside-Down
Move Frame (Previous) Playback Speed Control
Move Frame (Next
)
Playback Time
Note
y
While playing back recorded video, double-click the screen to switch
to full screen view mode. Double-click the screen again or press ESC to
return to default view.
y
While playing back recorded video, use the mouse wheel to zoom in/
out.
y
While playing back recorded video, right-click the screen to view the 100
% zoom-in screen.
Full Screen View
Front/Rear Screen Mode
View Front/Rear
Playback/Pause
Stop
Play Next File
Volume Control
BLACKVUE LCD I 33
Magnifying Glass
You can zoom playback selected portions of recorded video.
Left-click on the screen while playing back recorded video and a partial zoom-in window
Move the window to identify the license plate.
will appear.
Timeline
Video can be explored with the date, hr, min, and sec of when a video was recorded.
Year Selection
Timeline for Hour Selection
Note
y
Press Front or Rear, on the recorded video list, to display only front view
camera or rear view camera to enable the magnifying glass feature.
y
The magnifying glass feature is available only in BlackVue Viewer for
Windows.
34
Month Selection
Timeline for Minute Selection Timeline for Second Selection
Note
y
In the date selection area, a date of video recording is marked by a red
circle and the currently-selected date is marked by a yellow circle.
File Management
With the recorded video list, a le can be deleted or saved with a dierent name.
Select a le from the recorded video list and right-click it.
1
To delete a le, click Delete.
2
To save it with dierent name, click Export and select the option you want.
3
Note
y
When you select Sound Off, the voice is removed from the recorded
video to be saved.
Click the OK button and select the le name you want, together with the
4
path.
Click the Save button to nish.
5
BLACKVUE LCD I 35
Verify Files
With the recorded video list, a le can be veried forgery.
Select a le from the recorded video list and right-click it.
1
Click Verication and click OK button.
2
Map Check
The location of video recording can be conrmed on the map.
Select a le from the recorded video list and play it back.
1
Click the Map tab.
2
With the +/- button or mouse wheel, the map can be zoomed in/out.
3
Speed Unit Change
36
Map Zoom-In/Out
Map Type Selection
Car Location
Note
y
Internet connection is required to use the map service.
y
Only from recorded les with GPS information, data can be checked.
MyWay Viewer Check
The driving route of the video recording can be checked.
From the recorded video list, select and play back the desired le.
1
Press the button. Then, the driving route will be displayed on the map.
2
Double-click the map to play back the video recording from the driving
3
route, nearest to the spot clicked.
Speed Unit Change
Latitude & Longitude Car Location
Map Type
Selection
Record Starting
Point
Driving Route Currently-Played File
Car Location
BLACKVUE LCD I 37
Note
y
Internet connection is required to use the map service.
y
Only from recorded les with GPS information, data can be checked.
Note
y
JPG and BMP are supported as image le formats.
Saving as an Image
When playing back a recorded video, the desired part can be saved as an image.
From the recorded video list, select and play back the desired le.
1
Press the button on the part to be saved as an image.
2
Note
y
Use Timeline or press the
detail.
Click the G button.
3
Select the desired le name and path. Then, click the Save button.
4
/ button to explore the window in
38
Image Printing
When playing back a recorded video, the desired part can be saved as an image.
From the recorded video list, select and play back the desired le.
1
Press the button on the par t to be saved as an image.
2
Note
y
Use Timeline or press the
detail.
Click the button.
3
Select the printer, and click the OK button.
4
/ button to explore the window in
Settings
Basic Settings
Time, video, and recording settings can be changed.
Click the G button and click the Basic tab.
1
After changing the conguration click Save & Close.
2
1
2
No. Function Description
Time Settings
1
Image Settings
2
Recording
3
Settings
Language
4
Setting
3
Note
y
With the normal recording function disabled, only event and parking
mode recording videos are saved.
y
With the speed display unit disabled, the vehicle speed is not
displayed when the recorded videos are played back.
y
On microSD cards, older les are deleted rst to create space for newlyrecorded videos in microSD cards. Copy and store important les, such
as event recording, les to other storage media.
y
Press the Power button briey to enable or disable voice recording.
The time zone can be set for location used. The time
zone setting is used as information on a recorded video.
The quality and brightness of front/rear recorded
videos can be set. For detailed information on video
recording time, refer to Recording Time
Normal Record, Voice Record, Date and Time Display
and Auto Switching to Parking Mode function can
be turned on/o. Speed Unit Display and Record File
Unit can be changed.
The language of BlackVue voice directions can be
changed.
. (Page 48))
BLACKVUE LCD I 39
Time Setting
If an external GPS is not connected, set time manually before use.
If time is not set, the time of a recorded video may not be correctly saved.
Format the microSD card, and then upgrade the rmware.
1
Connect to the website of BlackVue (www.blackvue.com), and download
2
the time setting program.
Run the time setting program before setting time.
3
Note
y
When setting time, set time when BlackVue power is on. The product
boots approximately 15 seconds after power supply.
y
If an external GPS is connected, time will be automatically set.
40
Sensitivity Setting
It is possible to set the G-sensor sensitivity to start event recording during normal
recording and the G-sensor & motion detection sensitivity to start event recording
during recording in parking mode, respectively.
Click the G button and click the Sensitivity tab.
1
Change a setting, and click Save & Close.
2
Note
y
For details about advanced sensitivity settings, refer to Advanced
Sensitivity Settings. (Page 41)
1
2
No. Function Description
1
Normal Recording
2
Sensitivity for
Sensitivity for
Parking Mode
It is possible to set the G-sensor sensitivity to start
event recording during normal recording.
It is possible to set the G-sensor and motion
detection sensitivity to start event recording
during parking recording mode.
Advanced Sensitivity Settings
Sensitivity can be easily set while watching a recorded video.
Click the G button. Then, click the Sensitivity tab.
1
Click the Advanced Setting button for the desired setting.
2
Play back a recorded video. Save G-sensor information is displayed at the
3
bottom of the recorded video played back.
BLACKVUE LCD I 41
Move the control bar upwards or downwards to adjust the sensitivity range.
4
If the range is wide, it will be less sensitive. If the range is narrow, it will be
more sensitive.
It is recorded as an event. It is not recorded as an event.
Note
y
If an event recording occurs due to the sensitivity setting while a
recorded video is being played back, the edge of the playback screen
will blink in orange.
Change a setting, and click Save & Close.
5
42
Wi-Fi and Other Settings
Settings for Wi-Fi, LED indication, and voice announcements can be changed.
1
2
No. Function Description
SSID and the password, which determines whether to
1
2
Wi-Fi Setting
Other Settings
automatically run Wi-Fi and enable WI-Fi connection can
be changed. You can connect to Wi-Fi with the SSID and
password settings in the BlackVue application. If the
password is forgotten, you can reset the password.
For video recording status, normal recording mode,
and parking recording mode, the LED indicators can be
turned on/o.
The voice announcement or volume can be changed.
LCD and Protection Settings
The LCD screen, protection for vehicle batteries, and microSD card formatting cycle
can be set.
1 2
No. Function Description
1
2
LCD Settings
Safety Settings
An LCD setting can be changed. Screen brightness,
screen waiting duration, and rear view camera image
upside-down can be set.
Settings for protecting vehicle batteries, the microSD
card format notication cycle can be changed.
BLACKVUE LCD I 43
How to Apply Conguration
Your settings can be applied to the product.
Insert the microSD card into the product. For details on how to insert the
1
microSD card, refer to Insert & Remove the microSD Card
Once power is turned on, your settings will be automatically applied.
2
Note
y
Insert the microSD card only when the product is turned o.
44
. (Page 15))
Firmware Upgrade
Connect the microSD card to the PC to upgrade firmware version. The firmware
version can be upgraded with BlackVue application. For details, refer to the BlackVue
Application manual.
Connect the microSD card to the PC. For details on how to connect, refer to
1
Playback Using a PC
Format the microSD card, and connect to BlackVue website (www.blackvue.
2
com). Then, download the rmware upgrade le, in the form of a zip le.
Unzip the le, and copy the BlackVue folder to the microSD card.
3
Insert the microSD card in BlackVue, and turn on the power. Then, upgrade
4
will automatically occur.
. (Page 22))
Note
y
Once firmware upgrade is completed, all of the settings will be
initialized.
y
For details on how to insert the microSD card, refer to Insert & Remove
the microSD Card. (Page 15)
y
Insert the microSD card only when the product is turned o.
Caution
y
Make sure that the power is never turned o while rmware upgrade is
in progress.
‘Hancom Inc.’ owns the copyright of the ‘HANDotum / HANDotumB /
HANDotumExt’ font used in DR750LW-2CH rmware.
Product Specications
& Standards
Model Name DR750LW-2CH
Front: Black / Width 107.2mm x Height 67.5mm x
Color/Size/Weight
Memory microSD card (16GB / 32GB / 64GB)
Recording Mode
Camera
Viewing Angle
Thickness 20.5mm / 136g
Rear: Black / Width 67.4mm x Height 27.6mm / 30g
Emergency Recording, Normal Recording, Event Recording
(Impact Detection), and Parking mode Recording
(Motion+Impact Detection)
※
For Parking mode recording, a battery discharge
prevention device is required.
Front: CMOS Sensor 2 million pixel
Rear: CMOS Sensor 2 million pixel
Front: Diagonal: 146°; Horizontal: 115°; Vertical: 85°
Rear: Diagonal: 129°; Horizontal: 108°; Vertical: 57°
Product Specications
BLACKVUE LCD I 45
Front Rear
Full HD (1920x1080)
@30Fps
Resolution/Frame
LCD
Video Compression
Type
Wi-Fi Internal(802.11b/g/n(2.4~2.4835GHz)
GPS External
Microphone Built-In
Speaker
Full HD (1920x1080)
@30Fps
HD (1280x720)
@30Fps
※
The resolution/frame can be changed.
4-Inch WVGA (800x480) Touch Screen
※
Front/rear PIP enabled
MP4
Built-In
※
Voice Announcement
46
Full HD (1920x1080)
@30Fps
HD (1280x720)
@30Fps
HD (1280x720)
@30Fps
Front: Front Security LED, Wi-Fi LED, GPS LED,
LED Indicators
Sensor 3-Axe Acceleration Sensor
Button
Backup Battery Built-In Super Capacitor
Input Power DC 12V-24V
Power Consumption
Cut-O
Continuous
Operating Temperature -20C ~ 60C
Voltage
Power
Voltage CutO Timer
Storage Temperature -20C ~ 70C
High Temp. Cut-O Approx. 70C
Recording Status (REC)LED
Rear: Rear Security LED
Power Button
※
Pressing Short: Star ts and stops voice recording.
※
Pressing Long: Turns on or o the power.
Max. 10W (Avg. 6.6W)
※
Depending on the usage condition, it is subject to
change.
11.8V/12V/22.8V/23.2V can be selected.
12 hours/24 hours/36 hours/48 hours/72 hours can be
selected.
Certicates
Software
Application
Front: KC, CE, FCC, RoHS, Telec, WEEE
Rear: KC, CE, FCC, RoHS, WEEE
BlackVue Viewer
※
Windows XP or higher ( Windows 8 supported) and Mac
Leopard OS X(10.5) or higher
BlackVue Application (Android 2.3 or higher, iOS 5.0 or
higher, and Windows 8.0 or higher)
LED Indicators
Recording
State
Recording
Wi-Fi ON/OFF
Wi-Fi ON/OFF Change
GPS ON/OFF
GPS ON/OFF Change
Software Control Enabled Disabled Disabled Enabled Disabled
LED
Normal
Event
Parking
State (REC)
Blinking Red
and Fast
Blinking
Blinking Red
and Fast
Blinking
Boot-Up Cross Blinking
Emergency
Red
Red
Wi-Fi GPS
Lighting
Blue
Blinking
Blue
Lighting
Blinking
Green
Green
Front
Security
Blinking
White and
Fast
Blinking
White
Blinking
White and
Fast
Blinking
White
BLACKVUE LCD I 47
Rear
Security
Lighting
White
Recording Time
Item
Memory
Capacity
Bit Rate
Resolution
(Front+Rear)
Full HD + Full HD
@30fps
16 GB 3 HR 20 MIN 3 HR 50 MIN 4 HR 30 MIN
32GB 6 HR 40 MIN 7 HR 40 MIN 9 HR
64GB 13 HR 20 MIN 15 HR 20 MIN 18 HR
Front 6 Mbps 6 Mbps 4 Mbps
Rear 4 Mbps 3 Mbps 3 Mbps
Full HD + HD
@30fps
Note
y
Depending on your environment, the actual recording duration may
var y.
y
Depending on the image quality, the microSD card lifespan can be
shorten.
48
HD + HD
@30fps
Before Requesting A/S Service
It is required for users to back up important data regularly from storage device (to other separate media). Depending on the situation, it will be necessary to delete the
data from the internal storage device (component). It might be needed to delete all the data from the product for A/S. So it is required for users to back up important
data by themselves before requesting A/S. For all the A/S products, it is regarded that the user already backed up the data so there is no additional back-up process.
Therefore, it is important to note that we are not responsible for any data lost during A/S.
FCC Compliance Information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
y
Reorient or relocate the receiving antenna.
y
Increase the separation between the equipment and receiver.
y
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
y
Consult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void the user’s authority to operated the equipment under FCC rules.
YCK-DR750LW-2CH
Name | Car Dashcam
Manufacturer | Pittasoft Co.,Ltd. / Korea
Address | (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul,
153-718, Republic of Korea
Sales Headquater | Tel: +82-2-6947-4670(#3) | Fax: +82-2-6947-4699
| e-mail: sales@pittasoft.com
Loading...