BlackVue DR500-HD User Manual

Car Dashcam

Car Dashcam

Name

(Gasan-dong, BYC HIGHCITY), A-7th oor, 131, Gasan digital 1-ro,

Address

Geumcheon-gu, Seoul, 153-718, Republic of Korea

Sales Headquater

Manufacturer

Tel: [phone](#3) l Fax: [phone]

e-mail: [e-mail]

Pittasoft Co., Ltd. / Korea

Table of Contents

Introduction to the Manual
Getting Started

8 Checks for the microSD Card

9 Product Features

10 Package Components

11 Names of Each Part

12 How to Attach & Detach the

How to Install the BlackVue

13 How to Insert & Remove the

14 Installation

Video Recording

16 Parking Mode Recording

17 Event Recording

Simple Video Playback

How to use the BlackVue
Software

24 Video Playback

28 Conguration

Firmware Upgrade
Product Specications
& Standards

36 microSD Card Standard

4

5 Cautions for Safety

Mounting Bracket

13 Checking Installation Position

microSD Card

16 Normal Recording

18 How to Playback using a microSD

Card

21 Installation & Execution

23 Screen Description

33

35 Product Specications

36 LED Indicators

DR500-HD 3

Introduction to the Manual

Thank you for purchasing a BlackVue by Pittasoft Co., Ltd.
This instruction manual contains information on how to operate your BlackVue.
Before using the product, make sure to read through this manual so as to use
the product in the correct way.
To enhance the performance of the product, the contents of this instruction
manual may be changed without prior notice.

Warranty & Support

yThis product records and saves videos of vehicle accidents, but it is not

guaranteed to record all accidents. Accidents with light impact that is not
enough to activate the impact detection sensor may not be recorded.

yIn accordance with Personal Information Security Law & related legislation,

Pittasoft Co., Ltd. will not be held responsible for any problem due to illegal
use of this product.

yThe recorded video produced by this product constitutes the secondary

data that may help to determine the circumstances of an accident. Pittasoft
Co., Ltd. will not be held responsible for any loss or damage caused by any
accident.

Copyright & Trademark

yThis instruction manual is protected by Copyright Law, and all rights to it

are protected by law.

yIt is prohibited to reproduce, copy, modify, or translate this instruction

manual without permission.

y

Pittasoft Co., Ltd. reserves the rights regarding all works related to the Black­Vue brand such as product design, trademarks, and product-promotional
videos. It is prohibited to reproduce, copy, modify, or use related works
without permission. Any violation may be penalized in accordance with the
relevant regulations.

BlackVue is the registered trademark of Pittasoft Co., Ltd.

Caution

yA formatted microSD card is provided when you purchase the prod-

uct. Insert the microSD card into BlackVue, and turn on the power.
The microSD card will be initialized, and programs such as BlackVue
Viewer will be installed.

4

Getting Started

Cautions for Safety

The purpose of these cautions is to maintain user safety and avoid damage to
property.
Please make sure to read through this manual so as to use the product in the
correct way.

DANGER

yDo not disassemble, repair, or modify the product yourself.

It can cause re, electric shock, or malfunction. For internal inspection and
repair, call the sales headquater.

yIf any foreign matter gets inside the product, detach the power cord

straightaway.

Call the sales headquater for repair.

yDo not operate the product while driving.

It can cause an accident. Stop or park your car in a safe place to operate it.

yDo not install the product where it can interfere with the driver's vision.

It can cause an accident.

yDo not use a damaged or modied power cord. Use the cords provided

by the manufacturer.

Otherwise it can cause explosion, re, or malfunction.

yDo not operate the product with wet hands.

It can cause electric shock.

yDo not install it in an environment with high humidity, or combustible

gases or liquids.

It can cause explosion & re.

Death or property damage can be caused for users if
the following directions are not followed:

DR500-HD 5

WARNING

yDo not leave the product where infants, children, or pets can reach it.

They might swallow small components, or their saliva could get into it and
cause an explosion due to a short circuit.

yWhile cleaning the inside of the car, do not spray water or wax directly

onto the product.

It can cause re, electric shock, or malfunction.

yIf smoke or an unsual smell is emitted from the power cord, detach it

immediately.

Call the sales headquater or the dealer.

yKeep the terminal of the power cord clean.

A dirty terminal can cause excessive heat and re.

yUse the correct input voltage.

Otherwise it can cause explosion, re, or malfunction.

yConnect the power cord rmly so that it cannot easily be disconnected.

Othersise it can cause re.

yDo not cover the product with any material.

It can cause external deformation of the product or re. Use the product
and peripherals where ventilation is ensured.

Death or serious injury can be caused for users if the
following directions are not followed:

6

CAUTION

yDo not spray cleaning products directly onto the outside of the prod-

uct.

It can cause discoloration, cracks, or malfunction.

yDo not press the RESET button with a sharp object such as an awl.

It can cause damage or malfunction.

yIf the product is used outside the optimal temperature range (0°C ~

60°C), performance can decline or malfunction can be caused.

yMake sure that the product is installed properly.

The product can fall as a result of vibration, and may cause physical injury.

yWhile entering or exiting a tunnel, during daytime in the face of bright

sunlight, or at night with no light, the quality of recorded video can
deteriorate.

yIf the product is damaged or the power supply is cut due to an accident,

video may not be recorded.

yExcessively tinted windshield glass can distort the recorded video or

cause it to be indistinct.

yProlonged use of the product can increase the interior temperature

and cause burns.

ymicroSD cards are a consumable so replace them after prolonged use.

They may not record video correctly after a long time in use, so check their
recording capability periodically and replace it as necessary.

yClean the lens regularly.

Foreign material attached to the lens can aect the recording quality.

yDo not remove the microSD card while it is saving or reading data.

The data can be damaged or malfunction caused.

yDo not use the BlackVue, while cover is open.

Injury or property damage can be caused for users if
the following directions are not followed:

DR500-HD 7

Checks for the microSD Card

Refer to the followings for trouble-free use of your microSD card.

yIt is recommended to format it once a week.
y If the recorded video suers from break-up, format the microSD card.
yFor stable function, format it with programs recommended by the SD card as-

sociation. For more details, refer to the BlackVue website (www.blackvue.com).

y Before formatting it, copy important les to other storage media to store

them.

y Insert the formatted microSD card into the product so that the microSD

card is automatically initialized and the rmware is installed on it.
yInsert or remove the microSD card only when the product is turned o.
ymicroSD cards are a consumables and they are guaranteed for 6 months.
yOther manufacturer's microSD cards can cause compatibility problems so it

is recommended to use a Pittasoft microSD card.

yThe use of the Power Magic (the Battery Discharge Prevention Device)

can shorten the microSD card lifespan.

8

Product Features

Ultra-high quality and smooth video

Q

Full HD (1920x1080) 30-frame ultra-high quality video

High-class design with functionality

Simple, luxurious design in pearl black

Megapixel lens & CMOS sensor

Clearer vision with high-resolution megapixel lens during both
day/night-time driving

High-quality wide-angle lens (155°)

Maximized viewing angle to record accurate video of any acci­dent

Diverse recording options (Normal/Event/Parking)

u

l

w

Event recording and automatic conversion & deactivation of
parking mode

High-compression recording mode to extend SD-card life

Ecient memory usage with high-compression storage method

Support of viewer programs for Windows PC and Mac

BlackVue software with convenient congurations such as power
video search, resolution change, voice direction, and parking
mode

DR500-HD 9

Package Components

BlackVue Manual

Power Cord Cable Clips (5 EA)

Double-sided Tape for the Mounting

Bracket

microSD Card Reader

Note

yPictures of the components may dier from the actual ones.
y To enhance the performance of the product, components may be

changed without prior notice.

10

microSD Card

(Including BlackVue Software)

Names of Each Part

Lock Button

Mounting Bracket Security LED

Recording LED

MIC LED Speaker

Power Socket

MIC on/o Button

Camera Lens

microSD Card Slot

Reset Button

Cover

DR500-HD 11

Note

yIf you need to reset BlackVue, press the Reset button. It is

recommended for emergency use only.

How to Attach & Detach the Mounting Bracket

Pull the unit out of the mounting bracket with the LOCK button pressed.

1

Insert the unit into the mounting bracket until you hear clicking sound,

2

to attach it.

12

How to Install the BlackVue

Checking Installation Position

It is recommended to install it at the back of rear view mirror. Clean any

1

foreign matter and moisture from the place where the product will be
installed.

Note

yDo not install the product where it can interfere with the driver's vi-

sion.

How to Insert & Remove the microSD Card

Open the cover on the side of the product.

1

Insert the microSD card into the microSD card slot, as shown in the pic-

2

ture.

To remove the microSD card, press the microSD card once and then pull

3

it out. Make sure that the microSD card doesn't pop out while trying to
remove it.

DR500-HD 13

Caution

yDo not remove the microSD card while it is saving or reading data.

The data may be damaged or malfunction caused.

y Copy important data to other storage media to store. Pittasoft Co.,

Ltd. will not be held responsible for data loss due to user negligence.

Note

yInsert or remove the microSD card only when the product is turned

o.

ymicroSD cards are consumables. Replace them after prolonged use.

Installation

Stop the engine where there is some light and in a safe place, and then

1

remove the key.

Attach the product to the windshield glass with the double-sided tape.

2

Set the camera lens to point directly forwards to the center when install­ing it. After installing the product, remove the lens cap.

Use the power cord to connect the DC IN of the product to car's power

3

socket.

Note

yIt is recommended to use Power Magic (the Battery Discharge Pre-

vention Device) to record video while the car is parked.

y To use the BlackVue at the same time as other equipment, purchase

and use a two-way adaptor.

14

Use the cable clip to organize the power cord so that it doesn't interfere

4

with the driver's vision.

Adjust the lens angle of the camera.

5

Note

yAfter adjusting the angle of the camera lens, remember the angle of

the mounting bracket so that it can be installed at the same angle
next time.

Start the engine and check if the product works properly.

6

Caution

yDo not remove the microSD card while it is saving or reading data.

The data may be damaged or malfunction caused.

ySet the time (time zone) when you use BlackVue for the rst time.

(28 page)

Note

yAfter a test drive, check if video was correctly recorded.
yRecorded video is saved in the MP4 format.

DR500-HD 15

Video Recording

Normal Recording

When the engine is started, the BlackVue is turned on automatically.

1

When the BlackVue is turned on, normal recording is automatically

2

started.

Note

yIf Power Magic (the Battery Discharge Prevention Device) is con-

nected, the BlackVue is not turned o.

yThe normal recording function can be disabled in the BlackVue soft-

ware conguration. (28 page)

Parking Mode Recording

If the car doesn't move for 10 min or longer when in normal mode, it is

1

automatically converted to parking mode recording.

In parking mode recording, if movement or impact is detected by the

2

camera, video is recorded.

Note

yTo use parking mode recording while the engine is stopped, con-

nect Power Magic (the Battery Discharge Prevention Device).

yAutomatic conversion function of parking mode recording can be

disabled in the BlackVue software conguration. (28 page)

16

Event Recording

If an impact is detected in normal or parking mode recording, event

1

recording is started.

It records video for 5 seconds before and 55 seconds after the impact.

2

Note

ySensitivity to impact can be adjusted in the BlackVue software con-

guration. (30 page)

yEvent recording time can be adjusted in the BlackVue software

configuration. (28 page) If you set the event recording time for 2
minute, it records video for 5 seconds before and 115 seconds after
the impact.

DR500-HD 17

Simple Video Playback

How to Playback using a microSD Card

Playback Using a Smartphone

With a smartphone that supports microSD cards video can be played back.

Turn o the BlackVue and remove the microSD card.

1

Note

y For the details on how to remove the microSD card, refer to How to

Insert & Remove the microSD Card. (13 page)

Insert the microSD card into the smartphone.

2

Open an application to play back recorded videos and select the

3

movie you want to play back.

Note

yHow to play back recorded videos may dier between smartphones,

so refer to your instruction manual for the details.

y If there are many recorded videos in the microSD card, it may take a

long time to load the le.

y Some smartphones don't support full HD video playback. For smart-

phones that support full HD video playback, refer to the BlackVue
website (www.blackvue.com).

18

Watching with a GPS navigation

Recorded videos can be played back using a GPS navigation.

Insert the provided microSD card into a microSD card reader.

1

Connect the microSD card reader to the GPS navigation.

2

Open an application to play back recorded videos and select the movie

3

you want to play back from the removable drive.

Note

yHow to play back recorded videos may dier between navigators, so

refer to your instruction manual for the details.

y If there are many recorded videos in the microSD card, it may take a

long time to load the le.

y Some GPS navigation don't support full HD video playback.

DR500-HD 19

How to Playback using a PC

Recorded videos can be played back with a PC.

Insert the provided microSD card into a microSD card reader.

1

Connect the microSD card reader to the PC.

2

Open an application to play back recorded videos and select the movie

3

you want to play back from the removable drive.

Note

y When trying to play back a recorded video with a movie playback

program on a PC, install the H.264 and AAC audio codecs.

yFor how to play back using the BlackVue software, refer to Video

Playback. (24 page)

20

How to use the BlackVue Software

Installation & Execution

How to Install

Dedicated BlackVue software can be installed in a PC.

Insert the provided microSD card into a microSD card reader.

1

Connect the microSD card reader to the PC.

2

Execute the 'BlackVueSetup(HD).exe' file in the 'BlackVue\Software'

3

folder.

Install the program according the installation program instruction. When

4

the installation is nished, the BlackVue software icon is displayed on the
desktop.

Double-click the icon to execute the program.

5

Note

yOnly the English version of BlackVue software is available for Mac,

and the functions & screen may be different from the BlackVue
software for Windows.

DR500-HD 21

How to Execute Without Installation

It is possible to execute the dedicated BlackVue program without installation.

Insert the provided microSD card into a microSD card reader.

1

Connect the microSD card reader to the PC.

2

Double-click 'BlackVue.exe' in the 'BlackVue\Application' folder.

3

22

Screen Description

1

6

No. Name Description

Playback Screen
for Recorded

1

Videos

Language

2

Setting

G-Sensor

3

Information

Recorded Video

4

List

Videos can be played back using this screen. The
mouse can be used to zoom in/out.

If you change the language on playback screen,
the language for BlackVue Viewer can be changed.
details about language conguration for BlackVue,
refer to the Basic Conguration. (28 page)

G-sensor information can be checked, at the time
the video was recorded.

Using the le list and map tab, the recorded video
list, and where a video was recorded can be checked.

: This is an normal recording le and marked

with green in the timeline.

: This is an event recording le and marked

with orange in the timeline.

: This is a parking mode recording le and

marked with blue in the timeline.

2

3

4

5

DR500-HD 23

No. Name Description

5

Timeline

Video can be explored with the date, hr, min, and
sec of when a video was recorded.

The playing-back window can be extended to full

Playback Option

6

Button

screen and be reversed upside down. With the
playback control button, video playback, speed,
and volume can be controlled.

Note

yThis model may not support the 2CH view and GPS function.

Video Playback

How to Control the Playback of Recorded Video

The recorded video can be played back in full screen mode and be reversed
upside down. The playback speed can be adjusted.

Frame Move (Previous) Frame Move (Next)

Play Previous File Play Next File

View Upside-Down

Playback/Pause StopFull Screen View Volume Control

Playback Speed Control

Note

yWhile a recorded video is played back, double-click the screen to

switch to full screen view. Double-click the screen again or press ESC
to return to default view.

yWhile playing back a recorded video, use the mouse wheel to zoom

in/out.

yWhile playing back a recorded video, right-click the screen to view

100 % zoom-in screen.

Playback Time

24

Magnifying Glass

Some parts of a recorded video can be zoomed in while playing back.
Left-click the screen while a recorded video is being played back to see a partial
zoom-in window and

to use it to identify the number plate of a car while moving it.

Note

yYou can use the Magnifier function only in BlackVue Viewer for

Windows.

Timeline

Video can be explored with the date, hr, min, and sec of when a video was re­corded.

Year Selection

Month Selection

Timeline for Hr Selection

Timeline for Min Selection Timeline for Sec Selection

Note

yIn the date selection area, the date with a recorded video is marked

by a red circle and the currently-selected date is marked by a yellow
circle.

DR500-HD 25

How to Manage Files

With the recorded video list, a file can be deleted or saved with a different
name.

Select a le from the recorded video list and right-click it.

1

To delete a le, click Delete.

2

To save it with dierent name, click Export and select the option you

3

want.

Press the OK button and select the le name you want, together with

4

the path.

Press the Save button to nish.

5

26

How to Save as an Image

While playing back a recorded video, some parts can be saved as images if you
want.

Select a le from the recorded video list and play it back.

1

From the image to be saved, press the button.

2

Note

yUsing the timeline or press the

images.

Press the G button.

3

Select the le name you want, together with the path, and click the Save

4

button.

Note

yJPG and BMP formats are supported for image les.

How to Print Out an Image

While playing back a recorded video, some parts can be printed out as images
if you want.

Select a le from the recorded video list and play it back.

1

From the image to be saved, press the button.

2

Note

yUsing the timeline or press the

images.

Press the button.

3

Select the printer and click the OK button.

4

/ button to explore detailed

/ button to explore detailed

DR500-HD 27

Conguration

Basic Conguration

Time, video, and recording congurations can be changed.

Click the G button and click the Basic tab.

1

After changing the conguration, click Save & Close.

2

1

2

No. Function Description

The time zone can be configured for where it is
used. The congured time zone is used as informa­tion for recorded video. For the details, refer to the
How to Congure the Time. (29 page)

Resolution, quality, and the brightness of the re­corded video can be configured. According to the
resolution, recording time varies: for the details, refer
to the microSD card standard. (36 page)

Normal Record, Voice Record, Date and Time
Display and Auto Switching to Parking Mode

function can be turned on/o.

Speed Display and recording mode, Record File
Unit and Recording Storage Setting can be

changed.

The language of BlackVue voice directions can be
changed.

1

2

3

4

28

Time Zone
(Timezone

Conguration)

Image Setting

Recording

Setting

Language

Setting

4

3

Note

yWith the normal recording function disabled, only event and

parking mode recording videos are saved.

y With the speed display unit disabled, the vehicle speed is not dis-

played when the recorded videos are played back.

y On microSD cards, older files are deleted first to mark space for

newly-recorded videos. Copy and store important les such as even
recording les to other storage media.

yIf you use a low-end device for playing a recorded video, please set

Quality to Normal (low-end compatible).

How to Congure Time

If the model is not equipped with GPS, set the time manually for use. If you do
not set the time, the time of the recorded video may not be saved correctly.

Format the microSD card and perform the rmware upgrade.

1

Access the BlackVue website (www.blackvue.com) and download the

2

time setting program.

Run the time setting program before setting the time.

3

Note

yThe time should be set to the time BlackVue turns on. Booting time

for BlackVue is about 15 seconds after power is connected.

DR500-HD 29

How to Congure Sensitivity

It is possible to congure the G-sensor sensitivity to start event recording dur­ing normal recording and the G-sensor & motion detection sensitivity to start
event recording during parking mode recording, respectively.

Click the G button and click the Sensitivity tab.

1

After changing the conguration, click Save & Close.

2

Note

yFor details about advanced sensitivity configuration, refer to Ad-

vanced Sensitivity Conguration. (31 page)

1

2

No. Function Description

1

2

Sensitivity

for Normal

Recording

Sensitivity for
Parking Mode

It is possible to congure the G-sensor sensitivity to
start event recording during normal recording.

It is possible to congure the G-sensor and motion
detection sensitivity to start event recording during
parking mode recording.

30

Advanced Sensitivity Conguration

The sensitivity can be congured while watching a recorded video.

Click the G button and click the Sensitivity tab.

1

Click the Advanced Setting button of the conguration you want.

2

Play back a recorded video. Saved G-sensor information is displayed at

3

the bottom of the recorded video which is played back.

Move the control bar up/down to adjust the sensitivity range. If the

4

range is wide, it is less sensitive, and if the range is narrow, it is more sen­sitive.

It is recorded as an event. It is not recorded as an event.

Note

yIf an event recording is started due to the sensitivity configured

while a recorded video is being played back, the edge of the play­back screen blinks in orange.

After changing the conguration, click Save & Close.

5

DR500-HD 31

Other Conguration

Congurations for LED indication and voice direction can be changed.

1

No. Function Description

For video recording status, normal recording mode,
and parking mode recording, the LED indicators can

1

Etc.

be turned on/o.
Voice direction item or the volume can be changed.

How to Apply Conguration

The user's conguration can be applied to the product.

Insert the microSD card into the product. For details on how to insert the

1

microSD card, refer to How to Insert & Remove the microSD Card.
(13 page)

When the power is turned on, the user's conguration is automatically

2

applied.

Note

yInsert the microSD card only when the product is turned o.

32

Firmware Upgrade

Existing products can be upgraded by downloading a new version of the rm­ware.

Connect the microSD card to the PC. For details on how to connect, refer

1

to How to Playback using a PC. (20 page)

Access the BlackVue website (www.blackvue.com) and download the

2

rmware upgrade le.

Double-click the firmware upgrade file to execute it and perform the

3

upgrade according to instructions provided in the program.

Note

yAfter rmware upgrade, the user's conguration is initiated.
y When the firmware upgrade is finished, the BlackVue software is

automatically installed. If you don't want it to be installed, click the
Cancel button.

DR500-HD 33

After the rmware upgrade is nished, insert the microSD card into the

4

BlackVue.

Note

yFor detailes on how to insert the microSD card, refer to How to

Insert & Remove the microSD Card. (13 page)

yInsert the microSD card only when the product is turned o.

When the power is turned on, it is automatically upgraded.

5

Caution

yMake sure that the power is never turned off while firmware up-

grade is in progress.

34

Product Specications & Standards

Product Specications

Model Name

Color/Size/Weight

Memory

Recording Mode

Camera

Viewing Angle

Resolution/Frame

Video Compression

Mode

Microphone

Speaker

LED Indicators

Sensor

Button

Backup Battery

Input Power

Current Consumption

Operation Temperature

Certicates

Software

DR500-HD

Pearl Black / Length 118.5mm x Diameter 36mm / 104g

microSD Card (16GB / 32GB)

Normal Recording, Event Recording (Impact Detection), and
Parking Mode Recording (Motion+Impact Detection)

For parking mode recording, a battery discharge prevention

❈

device is required.

CMOS Sensor (Approx. 2M Pixel)

Opposite Angle 156°, Horizontal 122°, Vertical 89°

Full HD(1920x1080)@30fps, Full HD(1920x1080)@15fps,
HD(1280x720)@30fps, HD(1280x720)@15fps, D1(720x480)@30fps

Resolution/frame can be changed

❈

MP4

Built-in

Built-in

Voice Directions

❈

Recording LED, MIC LED, Security LED

3-Axis Acceleration Sensor

MIC on/o Button

Built-in Super Capacitor

DC 12V-24V

Max. 2.8W

-20°C ~ 70°C

FCC, CE, RoHS

BlackVue Viewer

Windows XP or later (Up to Windows 8), Mac Leopard OS

❈

X(10.5) or later

DR500-HD 35

LED Indicators

LED

State

Recording (REC) MIC Security

Boot-up

Normal

Recording

Event

Parking

MIC ON

Software Control

microSD Card Standard

Blinking

Orange Blinking White Blinking

Red Blinking

Green Blinking

Blue Light

Available Available Available

Fast White Blinking

White Blinking

Memory
Capacity

16GB

32GB

Image

Quality

Highest

High

Normal

Normal

(low-end

compatible)

Highest

High

Normal

Normal

(low-end

compatible)

Full HD

(1920x1080)

30fps

3 HR 20 MIN 4 HR 10 MIN 4 HR 10 MIN 5 HR 40 MIN 8 HR 30 MIN

4 HR 30 MIN 5 HR 40 MIN 5 HR 40 MIN 8 HR 30 MIN 11 HR 20 MIN

6 HR 50 MIN 8 HR 30 MIN 8 HR 40 MIN 11 HR 20 MIN 17 HR 10 MIN

4 HR 30 MIN 6 HR 50 MIN 6 HR 50 MIN 11 HR 20 MIN 17 HR 10 MIN

6 HR 40 MIN 8 HR 20 MIN 8 HR 20 MIN 11 HR 10 MIN 16 HR 50 MIN

13 HR 30 MIN 16 HR 50 MIN 17 HR 22 HR 30 MIN 33 HR 50 MIN

9 HR 10 MIN 13 HR 30 MIN 13 HR 40 MIN 22 HR 40 MIN 33 HR 50 MIN

Full HD

(1920x1080)

15fps

9 HR 11 HR 10 MIN 11 HR 10 MIN 16 HR 50 MIN 22 HR 30 MIN

HD

(1280x720)

30fps

(1280x720)

Note

yThere may be some variation with actual recording time.
yDepending on the image quality, the microSD card lifespan can be

shorten.

36

HD

15fps

D1

(720x480)

30fps

Before Requesting A/S Service

It is required for users to back up important data regularly from
the storage device (to other separate media). Depending on the
situation, it will be necessary to delete the data from the internal
storage device (component). It might be necessary to delete all
the data from the product for A/S Service. So it is required for us­ers to back up important data by themselves before requesting
A/S Service. For all A/S services, it is assumed that the user has
already backed up their data, so there is no additional back-up
process. Therefore, it is important to note that we will not be held
responsible for any data lost during A/S service.

FCC Compliance Information

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.

CAUTION : Changes or modications not expressly approved by
the party responsible for compliance could void the user’s au­thority to operate the equipment.

Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable pro­tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi­cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the equipment and receiver.

yConnect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

yConsult the dealer or an experienced radio/TV technician for

help.

Modications not expressly approved by the manufacturer could
void the user's authority to operated the equipment under FCC
rules.

Product Warranty

The term of this product warranty is 2 year from the purchase date. (Accessories





such as Battery/microSD Card : 6 Months)

We, Pittasoft Co., Ltd., provide the product warranty according to Consumer Dispute





Settlement Regulations (drawn up by the Fair Trade Commission). Pittasoft or designated

partners will provide the service upon request.

Product Name
(Model Name)

Purchased When Purchased Where

Customer Information Address / Call Number

Serial No.

Consumer Injury

For serious repair required within 10 days of purchase

For serious repair required within 1 month of purchase Exchange

For serious repair required within 1 month of exchange

When not exchangeable Refund

For per­formance/
functional
problems
under normal
use condi­tions

1) Malfunction due to customer fault

- Malfunction & damage caused by user negligence (fall, shock, dam­age, unreasonable operation, etc) or careless use

- Malfunction & damage after the customer or a third party repaired
or modied the product.

- Malfunction & damage due to used of unauthorized components,
consumables, or separately sold parts

2) Other Cases

- Malfunction due to natural disasters (re, ood, earthquake, etc)

- Expired life span of a consumable part

- Malfunction due to external reasons

This warranty is only valid in the country where you purchased the product.





For Defect Free Repair

Repair

Repeated problem with the same defect (up to 3

If Avail-

times)

able

Repeated problem with dierent parts (up
to 5 times)

For the loss of a product while in A/S Refund with

When repair is unavailable due to lack of

Repair

spare parts within the component holding

If Un-

period

avail­able

When repair is unavailable even with spare
parts

Within the

Term

Exchange/

Refund

Exchange/

Refund

Exchange/

Refund

Paid Repair Paid Repair

Warranty

Out of the Term

N/A

Paid Repair/
Paid Product

Exchange

10% added to the

valuation of the

product taking

depreciation into

account

(Upper Limit:

Purchase Price)

Exchange/
Refund after
depreciation

MEMO

MEMO

MEMO

MEMO