Blackstar LT-DUAL User Manual [en, de, fr, es]
Suggested Settings
HBK-1050 07/13
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
The specifications and information in this publication are subject to change without prior notice.
LT-DUAL
TWO CHANNEL DISTORTION
Owner’s Manual
21
N2930
Warning!
Important safety information!
Read the following information carefully. Save all
instructions for future reference.
English
Do not open the equipment case. There are no user serviceable parts
in this equipment. Refer all servicing to qualied service personnel.
Unauthorised modication of this equipment is expressly forbidden by
Blackstar Amplication Limited.
Do not expose this apparatus to rain, liquids or moisture of any type.
Only use an approved Blackstar DC adapter. Unplug the DC adapter
from the mains supply when not in use.
Introduction
Thank you for purchasing this Blackstar effects pedal. Like all our
products this pedal is the result of countless hours of painstaking
Research and Development by our world-class design team.
Based in Northampton (UK), the Blackstar team are all experienced
musicians themselves and the sole aim of the development process
is to provide guitarists with products which are the ultimate tools for
self-expression.
All Blackstar products are subjected to extensive laboratory and
road testing to ensure that they are truly uncompromising in terms of
reliability, quality and above all TONE.
If you like what you hear and want to nd out more about the Blackstar
range of products please visit our website at www.blackstaramps.com.
Thanks!
The Blackstar Team
Features
The LT DUAL offers the ultimate in distortion exibility. Channel 1 lets
you move from clean, to boost to overdrive. Channel 2 then takes you
from super crunch right up to screaming lead.
The unique switching operation will transform a single channel
vintage amp into a three channel tone machine. Use the patented
ISF (Innite Shape Feature) control to take your tone from the USA
to the UK and anywhere in between. This innite adjustment over the
characteristics of the tone control network means, for the rst time,
you can effectively design your own tone and nally nd ‘the sound
in your head’.
English
All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
32
Controls
1. CH 1 Gain
This gain control adjusts the amount of overdrive or distortion that
Channel 1 will deliver. As the Gain control is increased clockwise (CW)
English
the sound will become more overdriven moving through crunch tones
until at its maximum position, a full distorted crunch tone is arrived at.
2. CH 1 Level
This Level control sets the overall level or volume from Channel 1 of
the pedal. It should be used in conjunction with the Gain 1 control
to achieve the exact type of drive you require. Generally speaking at
lower Gain settings the Volume will be increased and at higher Gain
settings the Volume should be decreased.
3. CH 2 Gain
This Level control sets the overall level or volume from Channel 2 of
the pedal. It should be used in conjunction with the Gain 2 control
to achieve the exact type of drive you require. Generally speaking at
lower Gain settings the Volume will be increased and at higher Gain
settings the Volume should be decreased.
4. CH 2 Level
The Level control sets the overall level or volume for Channel 2.
5. Tone
The Tone control allows exact adjustment of the treble frequencies
within the sound, and is common to both channels. At low settings,
counter clockwise (CCW), the sound will be warm and darker in
character. As the control is increased clockwise (CW) the sound will
become brighter. At the maximum settings the tone will be aggressive
and cutting.
6. ISF
The ISF control works in conjunction with the Tone control, and is
common to both channels. It allows you to choose the exact tone
signature you prefer. Fully CCW is a more American characteristic
with a tight bottom end and more aggressive middle, and fully CW
is a British characteristic which is more ‘woody’ and less aggressive.
See illustration below.
ISF
Amplitude
USA UK
Frequency
We recommend that to start with the ISF is set to half way and the
Tone control set to taste. Then try gradually adjusting the ISF CW and
CCW until you nd the sound you prefer.
USA UK
100
7. CH 1 On/Off Switch
Press this switch to turn Channel 1 on or off. Note, if Channel 2 is
already active, pressing this switch will change to Channel 1.
8. CH 2 On/Off Switch
Press this switch to turn Channel 2 on or off. Note, if Channel 1 is
already active, pressing this switch will change to Channel 2.
9. CH 1 On/Off LED
When the green LED is on Channel 1 is active. When the LED is not
on, Channel 1 is off.
10. CH 2 On/Off LED
When the red LED is on Channel 2 is active. When the LED is not on,
Channel 2 is off.
11. Input
Plug your guitar in here. Always use a good quality screened guitar
lead. To maximise battery life unplug your cable from the pedal when
not in use.
12. Output
This output is for connection to the input of your amplier or into other
pedals or effects. For best noise performance we recommend you
place the LT DRIVE pedal rst in the effects chain. Always use a good
quality screened guitar lead.
English
54
13. DC Inlet
For the input of a 9V DC adapter. Always use a Blackstar approved
9V adapter.
14. Battery Compartment
English
Insert a 9V PP3 battery here. When the Channel On/Off LEDs begins
to glow less brightly you should change the battery.
Technical Specication
Power: 9V DC / PP3 Battery
Maximum Current Draw: < 25mA
Controls: Ch 1 Gain, Ch 1 Level, Ch 2 Gain, Ch 2 Level, Tone, ISF
Switches: On/Off Switch
Indicators: Effect On/Off LED
Jacks: Input, Output
Dimensions (mm): W 90 x H 54.5 x D 122
Weight: 600g
English
76
N2930
WARNUNG!
Wichtige Sicherheitsinformationen!
Lesen Sie sich bitte die folgenden Informationen gründlich
durch. Bewahren Sie alle Bedienungsanleitungen auf, um
zukünftig nachschlagen zu können.
Öffnen Sie nicht das Gerätegehäuse. Dieses Gerät verfügt über
keine benutzerbrauchbaren Teile. Alle Wartungsarbeiten sollten
qualiziertem Kundendienstpersonal überlassen werden.
Unberechtigte Änderungen dieses Geräts werden von Blackstar
Amplication Limited ausdrücklich verboten.
Gegenstände aller Art dürfen nie in die Ventilationsschlitze des
Deutsch
Gerätes geschoben werden.
Setzen Sie dieses Gerät weder Regen noch Flüssigkeiten noch
sonstiger Feuchtigkeit aus.
Verwenden Sie nur den richtigen von Blackstar Gegenstände aller Art
dürfen nie in die Ventilationsschlitze des Gerätes geschoben werden.
Bei Nichtgebrauch des Geräts ziehen Sie den DC Adapter aus der
Stromversorgung heraus.
Einführung
Wir danken Ihnen für den Kauf dieses Blackstar Effektpedals. Genau
wie bei allen anderen Blackstar Produkten, ist auch dieses Pedal
das Ergebnis unzähliger Stunden sorgfältiger Forschungs- und
Entwicklungsarbeit, die von unserem erstklassigen Designteam in
Northampton (UK) durchgeführt wurde. Alle Mitglieder des Blackstar
Teams sind selbst erfahrene Musiker und haben es sich zum Ziel
gesetzt, den Musikern die richtigen Produkte in die Hand zu geben,
damit sie ihren Traum leben können.
Alle Blackstar Produkte durchlaufen ausführliche Tests um sicher zu
stellen, dass sie zuverlässig funktionieren und eine kompromisslos
gute Soundqualität liefern. Falls Ihnen dieses Gerät gefällt und Sie
mehr über die Blackstar Produkte erfehren möchten, besuchen Sie
uns bitte online unter www.blackstaramps.com.
Vielen Dank!
Das Blackstar Team
Eigenschaften
LT DUAL sorgt für Ihre ultimative Flexibilität im Distortion-Bereich. Mit
Kanal 1 decken Sie das Spektrum von cleanen Sounds über Boostbis hin zu Overdrive-Sounds ab. Kanal 2 nutzen Sie dann für erdige
Crunch- bis hin zu schneidenden Lead-Sounds.
Deutsch
Alle Elektro- und Elektronik-Altgeräte müssen
getrennt vom Hausmüll über dafür staatlich
vorgesehenen Stellen entsorgt werden.
98
Loading...