Safety Document
X
!
!
!
X
!
X
X
!
X
Safety Categories
Prohibited actions
Situations that need mandatory action
Situations that need attention
Safety Information
To ensure safety of the product and its users, please follow the safety instructions below:
If the product does not have a power button, unplug the product from the power source to
shut it off completely.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause
a fire, electric shock or product damage and void product warranty.
The product is for indoor use only. Do not use the product outdoors.
Avoid using the product in hot or humid locations.
Safety Document
If the product becomes wet during operation, do not touch the product without
unplugging it. Contact an experienced electrical technician for help.
Avoid disconnecting a cable from the product with excessive force.
Handle the product with care. Accidental damage will void product warranty.
!
Keep the product out of reach of children. The product contains small parts that can be
!
!
!
dangerous to children under 3 years old.
To avoid product overheating, do not place the product on paper, cloth, or other
flammable materials.
If you smell something burning inside the product or see smoke coming from the product,
unplug the product immediately and contact your dealer for help.
There are no user-serviceable parts inside the product. If you experience problems with the
product, please contact us or your dealer for assistance.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20cm between the radiator
and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The Country Code selection feature is disabled for products marketed in the US/CANADA.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
Type Connector Gain
PCB Murata 2.5dBi
Loading...