BLACKHAWK! BH8075 User Manual

3/4 Ton Heavy Duty

Wheel Dolly

Operating Instructions & Parts Manual

BH8075

SFA Companies ©2004

10939 N. Pomona Ave. Kansas City, MO 64153

816-891-6390

[e-mail]

- Before using this product, read this manual and follow all its Safety Rules and Operating Instructions

Made in PRC

TABLE OF CONTENTS

Warranty P2
Save These Instructions P3
Product Description P3
Specifications P3
Safety Instructions P4
Assembly P4
Operation P5
Maintenance P5
Troubleshooting P5
Replacement Parts P6

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge,
any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied
warranty not excluded hereby.

Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid,
to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specifically prohibited by applicable law:

(1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFEC­TIVE PRODUCTS AS DESCRIBED ABOVE.
(2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS
WHATSOEVER.
(3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITA­TION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A
PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.

2

SAVE THESE INSTRUCTIONS

For your safety, read and understand the information contained within. The owner and operator shall have an under­standing of this product and safe operating procedures before attempting to use this product. Instructions and Safety
information shall be conveyed in the operators native language before use of this product is authorized. Make certain
that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove
from service immediately.

Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If the dolly
has been or suspected to have been subjected to a shock load (a load dropped suddenly and violently upon it),
discontinue use until checked out by qualified personnel. Owners and operators of this equipment shall be aware
that the use and subsequent repair of this equipment may require special training and knowledge. It is recom­mended that an annual inspection be done by qualified personnel and that any missing or damaged parts, decals,
warning/ safety labels or signs be replaced with Blackhawk Automotive replacement parts only. Any dolly that
appears to be damaged in any way, is worn or operates abnormally shall be removed from service immediately until
such time as repairs can be made. Labels and Operator’s Manuals are available from the manufacturer.

PRODUCT DESCRIPTION

Blackhawk Automotive Wheel Dolly is designed to facilitate the removal and installation of pneumatic tires and wheel
assemblies on trucks, buses and trailers. It is a labor saving device useful in auto shops, bus barns and fleet service.

SPECIFICATIONS

Model Capacity

BH8075

3/4 Ton

(1500 Lbs)

Handle

Main Frame

Chain

Product Size (L X W X H)

39 7/8” X 43” X 33 1/4”

Hydraulic Unit

Load Leveler

Rear Caster

Lifting Range

3 1/2” ~ 11 3/4”

(12 5/8” w/ext. screw)

Ram

Oil Filler Plug

Tilt Range

-2.5° ~ 10°

Saddle

Handle Sleeve

Net Weight

131.2 Lbs

Jack Handle

Lifting Arms

Figure 1 - Model BH8075 Components

Release Valve

Front Caster

Figure 2 - Model BH8075 Hydraulic Unit Components

3