BLACKHAWK! BH6221 User Manual
Air Actuated Axle Jacks
Operating Instructions & Parts Manual
Model
BH6221
BH6301
SFA Companies ©2004
10939 N. Pomona Ave. Kansas City, MO 64153
sales@blackhawk-automotive.com
Capacity
22 Ton
30 Ton
816-891-6390
- Before using this product, read this manual and follow all its Safety Rules and Operating Instructions
Made in Taiwan
TABLE OF CONTENTS
Warranty P2
Save These Instructions P3
Product Description P3
Specifications & Safety Instructions P3
Assembly P5
Operation P5
Maintenance P5
Troubleshooting P6
Replacement Parts P6
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge,
any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied
warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid,
to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specifically prohibited by applicable law:
(1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE.
(2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS
WHATSOEVER.
(3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A
PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
2
SAVE THESE INSTRUCTIONS
For your safety, read, understand, and follow the information provided with and on these jacks. The owner and
operator of these equipments shall have an understanding of these jacks and safe operating procedures before
attempting to use. The owner and operator shall be aware that use and repair of these products may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before
use of these jacks are authorized. If any doubt exists as to the safe and proper use of these jacks, remove from
service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (inlcuding labels). Any
jack that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the
jack has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon
it), immediately discontinue to use until jack has been inspected by a Blackhawk Automotive authorized service
center. It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manual
are available from manufacturer.
PRODUCT DESCRIPTION
Blackhawk Air Actuated Axle Jacks are designed for lifting, not sustaining, loads ranging from 22 tons thru 30 tons
depending on its model. They are designed to be used vertically. After lifting, loads must be immediately supported
by other appropriate means such as jack stands. These jacks are not recommended for use in lifting or positioning construction trailers, mobile homes, houses and/or other building structures. These jacks comply with applicable
ASME / ANSI Standards.
SPECIFICATIONS
Model
BH6221
BH6301
Handle
Position
Release
Air Hose
Saddle &
Adapter
Holder
Wheel
Capacity
(Ton)
22
30
Min.
Ht.
9 7/8"
11"
Air Hose Supply Inlet
Lift Control Valve
Max.
Ht.
20 1/4"
18"
Release Valve
(1/4" PT)
Adapter
Saddle
Extension
Screw
Oil Filler Screw
(not shown)
Carrying Handle
Ext.
Screw
4"
N/A
Handle Length
48 3/4"
48 3/4"
Handle
Position
Release
Wheel
Jack Size
L x W
22 7/8" x 12 1/2"
22 " x 12 1/2"
Release Valve
Air Hose Supply Inlet
Lift Control Valve
Air Hose
G.W.(Lbs.)
96
122
(1/4" PT)
Saddle
Oil Filler Screw
(not shown)
Carrying Handle
Figure 1- Model BH6221 Components
Figure 2 - Model BH6301Components
3
Loading...