Heavy Duty
Hydraulic Service Jacks
Operating Instructions & Parts Manual
Model Number Capacity
BH6025 2 ½Ton
BH6034 3 Ton
SFA Companies ©2004
10939 N. Pomona Ave. Kansas City, MO 64153
816-891-6390
sales@blackhawk-automotive.com
- Before using this product, read this manual and follow all its Safety Rules and Operating Instructions
Made in PRC
TABLE OF CONTENTS
Warranty P2
Save These Instructions P3
Product Description P3
Specifications P3
Safety Instructions P4
Assembly P4
Operation P4
Maintenance P5
Troubleshooting P5
Replacement Parts P6
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge,
any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied
warranty not excluded hereby.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid,
to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
Except where such limitations and exclusions are specifically prohibited by applicable law:
(1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE.
(2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS
WHATSOEVER.
(3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A
PERIOD OF ONE (1) YEAR FROM DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
2
SAVE THESE INSTRUCTIONS
For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator
of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use.
The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
Instructions and safety information shall be conveyed in the operator's native language before use of this jack is
authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked, or damaged parts (including labels). Any
jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service
immediately. If the jack has been or suspected to have been subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until jack has been checked by a Blackhawk authorized service
center. It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals
are available from manufacturer.
PRODUCT DESCRIPTION
Blackhawk Hydraulic Service Jacks are designed to lift, not sustain, rated capacity loads. They are designed to be
used in conjunction with jack stands. Intended use: To lift one wheel or one axle of a vehicle for the purpose of service
and/or repair of vehicle components. After lifting, loads must be immediately supported by appropriately rated jack
stands. Check with vehicle owner's manual for proper lift points. Always refer to the Product Label and Operator's
Manual to establish rated capacity.
SPECIFICATIONS
Model Capacity
2 1/2 Ton
BH6034
Handle
Fork
Release Valve
3 Ton
Jack Size ( L X W X H )
Min. Height
25 3/8" x 13 1/8" x 6 1/2" 5 1/2" 19 1/2"BH6025
27 1/2" x 13 3/8" x 6 3/8" 19"
Handle
Saddle
Lifting Arm
Foot Pedal
Oil Filler Plug
( on reservoir )
Caster
Release Valve
5 1/2"
Max. Height
Handle
Saddle
Lifting Arm
Oil Filler Plug
( on reservoir )
Caster
Figure 1 - Model BH6025 Components
Figure 2 - Model BH6034 Components
3