Black & Decker Wjm225 Instruction Manual

MAX

1000ml

500ml

ENGLISH 4 ITALIANO 7

ΕΛΛΗΝΙΚΑ 10

MAX

1000ml

500ml

ENGLISH

Intended use

Your Black & Decker water filter has been designed to deliver pure filtered water quickly, removing high levels of chlorine and limescale. This product is intended for household use only.

Using your filter jug

X Only filter cold water. X Do not use the filter jug for any other purpose than

filtering water.

X Treated water should be consumed or discarded within

two days.

X If the water filter has not been used for more than

48 hours, flush the filter twice with fresh cold water and discard the water before using as normal.

X If the water filter is not be used for an extended period,

remove the filter cartridge, place it in a clean plastic bag and store it in a refrigerator. Before using the filter after storage, follow the preparation instructions in this manual.

X Always store filter cartridges out of direct sunlight and

away from heat sources.

Features

1. Spout

2. Lid

3. Cartridge life indicator

4. Water tank

5. Aqua Optima

filter cartridge

6. Filter jug

7. Seal

Unpacking

X Remove all packaging from the filter jug. X Remove the lid by gripping the sides of the lid (2) and

lifting it from the filter jug.

X Take the water tank (4) and the filter cartridge (5) out of

the filter jug (6) and remove any packaging.

X Clean the filter jug (6) with cold fresh water.

Assembly

Preparing the water filter cartridge (fig. A and B)

X Prepare the filter cartridge (5) by carefully following all

the instructions on the packaging.

X Remove the cartridge (5) from the packaging (fig. A).

Note: There may be a small residue of black carbon particles in the packaging or adhering to the body of the cartridge. This is normal, these particles are harmless and will be washed off during the following preparation process.

X Immerse the cartridge (5) in cold fresh water and shake

the cartridge (5) to remove the air trapped within the

cartridge (5) (fig B). Note: Some loose carbon particles may be released during this process. This is normal and does not affect the performance of the filter cartridge.

Fitting the Aqua Optima

X Remove the lid (2). X Remove the water tank (4) from the filter jug (6). X Make sure that the seal (7) is seated correctly in the

filter cartridge (fig. C and D)

base of the water tank (4) (fig. C). Note: If the seal is missing or incorrectly fitted, unfiltered water may leak into the filter jug.

X Put the filter cartridge (5) into the recess in the base of

the water tank (4).

X Press the filter cartridge (5) against the seal (7) and turn

it clockwise to lock it in place (fig. D).

X Make sure that the filter cartridge (5) is securely locked

in place.

X Put the water tank (4) into the filter jug (6). X Fit the lid (2). X Fill the water tank (4) with cold water, the water will pass

through the cartridge (5) into the filter jug (6).

X Discard the water. X Repeat the process of filling and discarding once more. X Fill the water tank (4), the filter jug (6) is now ready for

use.

Filter cartridge life indicator (fig. E)

The cartridge life indicator (3) will remind you when to change the filter cartridge (5). Note: It is recommended that the filter cartridge is changed every four weeks.

To set the cartridge life indicator (3) turn the reminder dial in the direction of the arrow until the number of the next month is displayed:

X For example, if you have just changed the filter and the

month is April (month 4) set the dial to 5 to remind you

to change the filter in May.

Changing the filter cartridge (fig. A - D)

The optimum life of a filter cartridge is 130 litres, which is approximately 4 weeks for a standard family in a hard water area.

X Remove the lid (2). X Remove the water tank (4) from the filter jug (6). X Turn the filter cartridge (5) anti-clockwise to release it

from the water tank (4).

X Discard the filter cartridge (5).

ENGLISH

X If the seal (7) becomes dislodged while removing the

filter cartridge (5), refit the seal (7) onto the lugs on the lower side of the water tank (4).

X Prepare and insert a new Aqua Optima

filter

cartridge (5).

Cleaning and maintenance

The water tank, filter jug, lid and seal should be cleaned regularly. Warning! Do not use any washing up liquid or anything that may taint the water. Warning! Do not use any harsh or abrasive cleaning agents or solvents.

X Wash all the parts by hand, rinse with clean water and

dry thoroughly.

Protecting the environment

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Reuse of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

Technical data

WJM225

Capacity l 2.25 Weight (empty) kg 0.68

EC declaration of conformity

WJD225 - H1

Black & Decker declares that these products conform to:

NSF/ANSI Standard 42

The undersigned is responsible for compilation of the

technical file and makes this declaration on behalf of

Black & Decker

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG,

United Kingdom

25-03-2009

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:

X The product has been used for trade, professional or

hire purposes.

X The product has been subjected to misuse or neglect. X The product has sustained damage through foreign

objects, substances or accidents.

X Repairs have been attempted by persons other than

authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at:

www.2helpU.com

+ 11 hidden pages