Black & Decker Wd9610ecn Instruction Manual
DV4800N
DV9610PN
WD4810N
WD7210N
WD9610N
WD9610ECN
A
B
C
E
D
E
F
2
G
H
I
K
J
3
ENGLISH
(Original instructions)
Intended use
Your Black & Decker Dustbuster® handheld vacuum cleaner
has been designed for light dry vacuum cleaning purposes
(DV4800N, DV9610PN). This appliance is intended for
household use only.
Your Black & Decker Dustbuster® handheld vacuum cleaner
has been designed for light wet and dry vacuum cleaning
purposes (WD4810N, WD7210N, WD9610N and
WD9610ECN). This appliance is intended for household use
only.
Safety instructions
Using your appliance
u
Do not use the appliance to pick up liquids or any materials that could catch
re.
u
Do not use the appliance near water.
u
Do not immerse the appliance in water.
u
Never pull the charger lead to disconnect the charger from the socket. Keep
the charger lead away from heat, oil
and sharp edges.
Warning! Read all safety
@
warnings and all instructions.
Failure to follow
the warnings and instructions
listed below may result in electric
shock, re and/or serious injury.
u
This appliance can be used by children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge if
they have been given supervision or
instruction concerning use of the appli-
Warning!
@
powered appliances, basic safety
precautions, including the following, should always be followed to
reduce the risk of re, leaking bat-
When using battery-
ance in a safe way and understand the
hazards involved. Children shall not
play with the appliance. Cleaning and
user maintenance shall not be made
by children without supervision.
teries, personal injury and material
damage.
u
Read all of this manual carefully before using the appliance.
u
The intended use is described in this
manual. The use of any accessory
or attachment or the performance
of any operation with this appliance
other than those recommended in this
instruction manual may present a risk
of personal injury.
u
Retain this manual for future reference.
Inspection and repairs
u
Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect its operation.
u
Do not use the appliance if any part is
damaged or defective.
u
Have any damaged or defective parts
repaired or replaced by an authorized
repair agent.
u
Regularly check the charger lead for
damage. Replace the charger if the
lead is damaged or defective.
4
ENGLISH
(Original instructions)
u
Never attempt to remove or replace
any parts other than those specied in
this manual.
Additional safety instructions
After use
u Unplug the charger before cleaning the charger or charg-
ing base.
u When not in use, the appliance should be stored in a dry
place.
u Children should not have access to stored appliances.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u Injuries caused by touching any rotating/moving parts.
u Injuries caused when changing any parts, blades or ac-
cessories.
u Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
u Impairment of hearing.
u Health hazards caused by breathing dust developed when
using your tool (example:- working with wood, especially
oak, beech and MDF.)
Batteries and chargers
Batteries
u Never attempt to open for any reason.
u Do not expose the battery to water.
u Do not expose the battery to heat.
u Do not store in locations where the temperature may
u Under extreme conditions, battery leakage may occur.
When you notice liquid on the batteries carefully wipe the
liquid off using a cloth. Avoid skin contact.
u In case of skin or eye contact, follow the instructions
below.
Warning! The battery uid may cause personal injury or
damage to property. In case of skin contact, immediately rinse
with water. If redness, pain or irritation occurs seek medical
attention. In case of eye contact, rinse immediately with clean
water and seek medical attention.
Chargers
Your charger has been designed for a specic voltage. Always
check that the mains voltage corresponds to the voltage on
the rating plate.
Warning! Never attempt to replace the charger unit with a
regular mains plug.
u Use your Black & Decker charger only to charge the bat-
tery in the appliance/tool with which it was supplied. Other
batteries could burst, causing personal injury and damage.
u Never attempt to charge nonrechargeable batteries.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
u Do not expose the charger to water.
u Do not open the charger.
u Do not probe the charger.
u The appliance/tool/battery must be placed in a well venti-
lated area when charging.
Electrical safety
Your charger has been designed for a specic voltage. Always
check that the mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the charger unit with
a regular mains plug.
Symbols on the charger
exceed 40°C.
u Charge only at ambient temperatures between 10°C and
40°C.
u Charge only using the charger provided with the appli-
This tool is double insulated; therefore no earth wire
#
ance/tool. Using the wrong charger could result in an
electric shock or overheating of the battery.
u When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
u Do not damage/deform the battery pack either by puncture
w
or impact, as this may create a risk of injury and re.
u Do not charge damaged batteries.
Read all of this manual carefully before using the
appliance.
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
Short circuit proof safety isolating transformer. The
mains supply is electrically separated from the
transformer output.
5
Loading...