Black & Decker TC212B, TC213B, TC204B Instruction Manual
TRAVEL COOLER AND WARMER
INSTRUCTION MANUAL
Catalog Number TC212B
Thank you for choosing Black & Decker!
Go to www
.BlackandDecker.com/NewOwner
to register your new product
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-544-6986
BEFORE YOU CALL, HAVE THE CATALOG No, AND DATE CODE
AVAILABLE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A
SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS
VITAL TO BLACK & DECKER.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Cat. # TC212B Form # 90527944 February 2009
Copyright © 2009 Black & Decker Printed in China
TC212B ManualEN 111907.qxp 2/12/09 2:29 PM Page i
1
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES
READ ALL INSTRUCTIONS
WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
• AVOID DANGEROUS ENVIRONMENTS Don’t use appliances in damp or wet locations. Don’t use appliances in
the rain.
• STORE IDLE APPLIANCES INDOORS. When not in use, appliances should be stored indoors in dry, and high or
locked-up place – out of reach of children.
• USE RIGHT APPLIANCE. Do not use the appliance for any job except that for which it
is intended.
• DON’T ABUSE CORD. Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord from
heat, oil, and sharp edges.
• DISCONNECT APPLIANCES. Disconnect the appliance from the power supply when not in use, before servicing,
and when changing accessories.
• AVOID UNINTENTIONAL STARTING. Be sure switch is off when plugging in.
• USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory or attachment not recommended for use
with this appliance could be hazardous. Note: Refer to the accessory section of this manual for further details.
• CHECK DAMAGED PARTS. Before further use of the appliance, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective
switches replaced by authorized service center. Do not use appliance if switch does not turn it on and off.
• DO NOT OPERATE near flammable liquids or in gaseous or explosive atmospheres. Sparks might ignite fumes.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided,
may result in property damage.
RISK OF UNSAFE OPERATION. When using appliances or equipment, basic safety precautions should always be
followed to reduce the risk of personal injury. Improper operation, maintenance or modification of appliances or
equipment could result in serious injury and property damage. There are certain applications for which appliances
and equipment are designed. Black & Decker strongly recommends that this product NOT be modified and/or
used for any application other than for which it was designed. Read and understand all warnings and operating
instructions before using any appliance or equipment.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK: Do not allow this unit to become wet. Operate only
when dry. Never allow the unit to be immersed in water or other liquid. This will void the warranty.
WARNING: TO REDUCE THE RISK OF FIRE:
• Manually turn the unit off after each use. This unit does not automatically turn on and off.
• Do not operate unattended for extended periods of time.
• Allow airflow around fan area — blocking airflow will slow cooling or heating.
• To reduce the risk of damage to the DC plug and cord, pull by DC plug rather than cord when disconnecting.
• Check unit periodically for wear and tear. Take to a qualified technician for replacement of worn or defective
parts immediately.
• This unit is intended for use with a 12 volt DC power source that can provide at least 8 amps of current. DO
NOT attempt to use with any other power source.
• NEVER operate unit in an enclosed space. ALWAYS ensure that there is adequate ventilation and free flow of air
around the unit, so that air expelled by the fan is effectively dissipated.
TC212B ManualEN 111907.qxp 2/12/09 2:29 PM Page 1
2
• When operating the unit in a vehicle or boat cabin, adequate ventilation must be provided by an air conditioning
system or open window. In a car with windows up, air temperatures can reach 150°F (65°C).
• This unit is intended for portable use only; it is not designed to be built-in or recessed — this would interfere
with the unit’s air dissipation system, and could cause a fire or other safety hazard.
• Use only with the supplied power cord. If the cord becomes worn or damaged, discontinue use and call the
Customer Service department at 1-800-544-6986 for authorized replacement.
WARNING: TO REDUCE THE RISK OF INJURY:
• Metal plug tip may become HOT after extended use. Handle with extreme care.
WARNING: TO REDUCE THE RISK OF INJURY OR FIRE:
• Follow these instructions and review cautionary markings on this product.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• THIS UNIT IS NOT FOR USE BY CHILDREN AND SHOULD ONLY BE OPERATED BY ADULTS.
• Keep small children from opening unit when warming.The interior of this unit gets quite hot in warming mode.
• When operating from a vehicle battery, make sure you start your engine after 3-4 hour of operation to recharge
the vehicle battery.
• Do not overstuff cooling/heating chamber. Airflow between food containers keeps temperature more even.
• Do not use this unit for medical use. It is not approved for medical applications.
• Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subject to damage or stress.
• Make sure shoulder strap is securely fastened to unit.
• Read This Instruction Manual Before Using This Unit.
SAVE THESE INSTRUCTIONS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE BLACK & DECKER
®
TRAVEL COOLERAND WARMER MODEL TC212B.
INTRODUCTION
Thank you for choosing the
Black & Decker®Travel Cooler & Warmer,
one of the most advanced, state-of-theart units on the market today. Please read this manual carefully before use to ensure optimum performance and
avoid damage to the unit itself or power sources from which it operates.
The
Black & Decker®Travel Cooler & Warmer
is compact, lightweight, and portable. It provides convenient storage
for cold or hot beverages and foods, making conventional insulation-only coolers, thermal bottles and jars and
insulated chests obsolete.
For extended use:
Plug the
Black & Decker®Travel Cooler & Warmer
into vehicle’s 12 volt DC accessory outlet to keep food and
drinks cold or warm. No more digging around in melting ice and water for soggy foods and dripping drinks. No
need for ice, dry ice, or cold/hot packs. Ideal for use in a:
• Car
• Truck or SUV
• RV, mobile home, camper
• Boat
• Home or motel — use with the CV6B AC/DC Converter (sold separately).
• At the beach, on picnics, at the campground — use with battery power.
Completely portable:
Take the
Black & Decker®Travel Cooler & Warmer
with you, wherever you go, to keep cold or hot food and
drinks at just the right temperature.
IMPORT
ANT SUGGESTIONS
The
Black & Decker®Travel Cooler & Warmer
cools like a refrigerator and warms like an oven. For best
performance, plug in the unit approximately 2 hours before loading to give it time to warm up or cool down.
Always try to fill your unit with pre-chilled or pre-heated food or beverages, as the unit will always perform at its
best when you do this.
Generally, your unit will cool down to as much as 36°F (or 2°C). To ensure optimum performance, always keep
the unit out of direct sunlight when using as a Cooler. To promote your unit’s cooling capacity on warm days, try
reusable frozen ice packets. These are particularly helpful in keeping your unit cold while unplugged.
TC212B ManualEN 111907.qxp 2/12/09 2:29 PM Page 2
3
When using the unit as a warmer, it will warm to approximately 120°F (48.8°C). On cold days, the unit will need
more time to reach the maximum warm temperature.
Contact Technical Support at 1-800-544-6986 for further information.
The
Black & Decker®Travel Cooler & Warmer
can be used with most food and beverages, either cold or hot.
Use with standard household containers or ready-to-use food and drink packaging. Ideal as a:
Cooler:
• Beverages – sodas, beer, wine, juice, milk, iced tea or coffee, shakes, thirst quenchers, water and more —
in cans, bottles, cartons, pouches, sport bottles, etc.
• Food – salads, sandwiches, deli meats, hamburgers, hot dogs, meat or fish, buns, condiments and dips,
etc.
• Desserts – puddings, fruit cups, yogurts, etc.
• Snacks – fruit, candy, chocolate, cookies, fruit bars, chips, etc.
Warmer:
• Beverages – hot coffee and tea, cocoa, milk, etc.
• Food – leftovers, pre-packaged/pre-heated meals, take-out foods, soups, covered dishes, stews,
casseroles, etc.
FEATURES
• Compact, lightweight, completely portable — use with vehicle’s or boat’s 12 volt DC accessory outlet, or
appropriate 12 volt DC power supply
• Non-wearing thermo-electric system cools as low as 36°F (or 2°C) or warms to approximately 120°F (48.8°C)
• Built-in holder for two cups or two cans
• Use with standard household containers or ready-to-use packaging
• Rests on vehicle seat or floor for easy access
• Padded lid
• Extra-long, 7' (2.13 meters), 12 volt DC power cord with built-in 5-amp fuse-protected plug to protect the unit
and power source
• Convenient, detachable shoulder strap for easy portability
• Durable, weather-resistant construction with easy-open-and-close lid
• Environmentally friendly, CFC-free, polyurethane liner
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• HOT/OFF/COLD sliding power switch
• “COLD” and “HOT” LED indicators
Controls and Functions
POWERING THE TRA
VEL COOLER AND WARMER
Connecting to a Portable 12 Volt DC Power Supply, For Use Away From Vehicle
• Make sure the unit’s HOT/OFF/COLD switch is in the OFF position.
BUILT-IN HEAT
DISSIPATION FAN
PADDED
TOP
HOT/OFF/COLD
POWER SWITCH
HOT/COLD/
LOW VEHICLE
BATTERY
LED INDICATORS
TC212B ManualEN 111907.qxp 2/12/09 2:29 PM Page 3
4
• Insert the 12 volt DC plug on the power cord into the 12 volt DC socket on the portable power supply.
• Continue with steps 3-9 for cooler or warmer function. Observe all CAUTIONS and WARNINGS.
Note:
When used with a rechargeable power supply, a full-charge on the power source is
recommended for optimum performance.
Connecting to an AC/DC Converter (Sold Separately)
• Plug converter’s (CV6B) power cord into standard 120 volt 60 HZ outlet
• Make sure the unit’s
HOT/OFF/COLD switch is in the OFF position
• Insert the 12 volt DC plug on the power cord into the 12 volt DC socket on the AC/DC
power converter.
• Continue with steps 3-9 for cooler or warmer function. Observe all CAUTIONS
and WARNINGS.
OPERATING INSTRUCTIONS
Keep the HOT/OFF/COLD switch in OFF position for five minutes before switching between hot and cold.
Using the Travel Cooler and Warmer as a Cooler
1. Make sure the unit’s HOT/OFF/COLD switch is in the OFF position. Start vehicle or turn ignition to “accessory”
position.
2. Insert the DC plug into the vehicle’s 12 volt DC accessory outlet.
3. Move the HOT/OFF/COLD switch on the cooler to the COLD position.
4. The COLD LED indicator will light to show the unit is cooling.
5. Place items into the cooler and close the lid. Do not overstuff the cooler or keep the lid from closing.
6. Keep cooler lid closed during operation and reclose it quickly when adding items to it or removing items from it.
7. After use, turn the switch to the OFF position and empty the cooler.
8. Disconnect the power cord from the vehicle’s accessory outlet.
9. Clean unit as described in the Care & Maintenance section of this manual.
• The cooler takes about 120-200 minutes to reach its minimum cool temperature as low as 36°F (or 2°C). It is
recommended that items to be placed in the cooler be pre-chilled.
This will assist the cooler in reaching the lowest temperature as quickly as possible.
• Food will stay cool for some time after the unit is disconnected or turned off, but temperature will rise to that of
the surrounding air.
CAUTION: TO AVOID RISK OF INJURY:
• Observe common sense hygiene rules, as with any cooling unit. Do not eat or drink perishable items that may
have spoiled or become contaminated from lack of proper temperature control.
Using the Travel Cooler and Warmer as a Warmer
1. Make sure the unit’s HOT/OFF/COLD switch is in the OFF position. Start vehicle, or turn ignition to
“accessory” position.
2. Insert the DC plug into the vehicle’s 12 volt DC accessory outlet.
3. Move the HOT/OFF/COLD switch on the cooler to the HOT position.
4. The LED HOT indicator will light to show that the unit is warming.
5. Put items into the warmer and close the lid. Do not overstuff the warmer or keep the lid from closing. The
unit’s warming system is monitored by an automatic switch that turns the heating system on, then off when
the maximum temperature is reached and back on when the temperature drops.
6. Keep warmer lid closed during operation, and reclose it quickly when adding or removing items.
7. After use, turn the switch to the OFF position. Remove any food items.
8. Disconnect the power cord from the vehicle’s accessory outlet.
9. Clean unit as described in the Care & Maintenance section of this manual.
• Food will stay warm for some time after the unit is disconnected or turned off.
• The warmer is intended to maintain the temperature of pre-heated food and beverages; it is not designed to
warm cold items.
• The warmer takes about 120-200 minutes to reach its maximum warm temperature (approx. 120°F [48.8°C]). It
is recommended that items to be stored in the warmer be pre-heated. This will assist the warmer in reaching the
maximum temperature as quickly as possible.
CV6B
(Sold Separately)
TC212B ManualEN 111907.qxp 2/12/09 2:29 PM Page 4
Loading...