Black & Decker PX80 User Manual

PX80 Hair Dryer

First Use Safety Recommendation

Please read through this booklet for safe and efficient use of the appliance.
We urge you to read the "Hint's" section and also follow all detailed
instructions even if you are familiar with using this appliance.

Keep this guide handy for future reference.

English Page 02
Farsi Page 08
Arabic Page 11

PX80

English

Parts Identification

-2-

English

Intended use

Your Black & Decker Hair Dryer has been designed
for drying hair as described in this manual. This
product is intended for household use only.

Safety instructions

Warning! When using mains-powered appliances,
basic safety precautions, including the following,
should always be followed to reduce the risk of fire,
electric shock, personal injury and material
damage.

• Read all of this manual carefully before using the
appliance.

• The intended use is described in this manual. The
use of any accessory or attachment or the
performance of any operation with this appliance
other than those recommended in this instruction
manual may present a risk of personal injury.

• Retain this manual for future reference.

Using your appliance

• Switch off the appliance before changing
accessories or approaching parts which move
when in use.

• Make sure that the appliance is switched off
before connecting to or disconnecting from the
power supply.

• Always take care when using the appliance.

• Do not use the appliance outdoors.

• Do not operate the appliance if your hands are
wet.

• Do not operate the appliance if you are barefoot.

• Do not touch moving parts. Keep long hair and
loose clothing out of the way of the moving
parts.

• Guide the power supply cord neatly so it does
not hang over the edge of a worktop and cannot
be caught accidentally or tripped over.

• Never pull the power supply cord to disconnect
the plug from the socket. Keep the power supply
cord away from heat, oil and sharp edges.

• Switch off and wait for the motor to stop running
before disconnecting the appliance from the
power supply.

• Never detach any part or accessory while the
appliance is still connected to the power supply.
Always disconnect the appliance from the power
supply first.

• If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord
before disconnecting from the power supply.

• Disconnect the appliance from the power supply
when not in use, before fitting or removing parts
and before cleaning.

Safety of others

• Do not allow children or any person unfamiliar
with these instructions to use the appliance.

• Do not allow children or animals to come near the
work area or to touch the appliance or power
supply cord. Close supervision is necessary
when the appliance is used near children.

• The appliance is not intended for use by young or
infirm persons without supervision.

• Children must be supervised to make sure that
they do not play with the appliance.

After use

• Switch off and remove the plug from the socket
before leaving the appliance unattended and
before changing, cleaning or inspecting any parts
of the appliance.

• When not in use, the appliance should be stored
in a dry place. Children should not have access
to stored appliances.

Inspection and repairs

• Before use, check the appliance for damaged or
defective parts. Check for breakage of parts,
damage to switches and any other conditions
that may affect its operation.

• Do not use the appliance if any part is damaged
or defective.

• Have any damaged or defective parts repaired or
replaced by an authorised repair agent.

• Before use, check the power supply cord for
signs of damage, ageing and wear.

• Do not use the appliance if the power supply cord
or mains plug is damaged or defective.

• If the power supply cord or mains plug is
damaged or defective it must be repaired by an
authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord and do
not attempt to repair it yourself.

• Never attempt to remove or replace any parts
other than those specified in this manual.

-3-

English

Warning symbols

The following symbols are used in this manual:

Do not use this appliance near bathtubs,
showers, basins or other vessels

used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the

Electrical safety

supply corresponds to the voltage on the rating
plate.

For additional protection, the installation of a
Residual Current Device (RCD) having a rated
residual operating current not exceeding 30mA is
advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.

Features

1. Cool shot button

2. Ion indicator

3. Heat control switch

4. Speed control switch

5. Hanging loop

6. Concentrator nozzle

7. Diffuser nozzle

8. Rear cover

Assembly

Warning! Make sure that the appliance is switched
off and unplugged. Fitting and removing the
attachments (fig. A)

• Allow the appliance to cool before changing the

• Fit the diffuser nozzle (7) or the concentrator

Use

Warning! The appliance may be hot during use and
during the cool-down period.

containing water. When the hairdryer is

hair dryer is switched off.

!

Denotes risk of personal injury or damage
to the product in case of nonobservance of
the instructions in this manual.

Denotes risk of electric shock.

This tool is double insulated in accordance
with EN 60335; therefore no earth wire is
required. Always check that the power

To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.

attachments.

nozzle (6) by pushing it onto the outlet sleeve
until it snaps into place. Removed the item by
pulling it from the appliance.

Switching on and off (fig. B)

The speed control switch (4) has three positions:
off, slow and fast.

• Movethe switch to position 0 to switch the

appliance off.

• Turn the switch to position 1 for blowing air at a

slow speed.

• Turn the switch to position 2 for blowing air at a

high speed.

Heat control (fig. B)

The heat control switch (3) has three positions:
warm, hot and very hot.

• Movethe switch to position 1 for normal warm

air.

• Movethe switch to position 2 for hot air.

• Movethe switch to position 3 for very hot air.

Cool shot button (fig. B)

• Press and hold the cool shot button (1) to set

your individual style.

Diffuser and concentrator nozzles

• Fitthe concentrator nozzle (6) for general hair

drying and styling.

• Toadd volume and lift, fit the diffuser nozzle (7).

Ion indicator

• Theion indicator (2) will be permanently lit during

use.

• Thehair dryer will emit ions which will be carried

onto the hair by the flow of air.

Note: Smaller water particles dry faster, therefore
reducing the time the hair is subjected to heat
which can damage hair over time.

Cleaning and maintenance

Warning! Switch the appliance off and unplug it
before cleaning or maintenance.

• Removeany loose hair which may have become

trapped in the diffuser or the rear filter.

• Openthe rear cover (8) and remove hair.

• Donot try to disassemble or repair the hair dryer

yourself.

• Switchoff the appliance before cleaning,

changing accessories or touching any parts
which move in use.

Technical data

PX80

Voltage Vdc 230
Power input W 2000
Weight kg 0.8

-4-