Black & Decker Ht33, Gt241, Gt221s, Ht23, Gt150 Instruction Manual

...

6.5

6.4

6.3

6.2

6.1

Hedge Trimmer GT200 Series

Congratulations!

On your purchase of this hedgetrimmer from Black & Decker. This trimmer has the following features for your benefit:

• Full bale handle for comfort of use.

• Safety lock-off switch to prevent accidental starting.

• Front guard for user safety.

• Dual action blades for less vibration.

Safety instructions

Read all of this manual carefully, observing all the recommended safety instructions before, during and after using your machine. Maintain your machine in good working order.

Familiarise yourself with the controls on your machine before attempting to operate it, but above all, be sure you know how to stop your machine in an emergency. Retain this manual and all other literature supplied with your machine for future reference.

Warning! When using electric tools, basic safety precautions should always be taken

to reduce the risk of fire, electric shock and personal injury. Read all of these instructions before using the tool.

For safe operation:

• Keep the work area clean. Cluttered

areas and benches invite injuries.

• Consider work area environment.

Do not expose power tools to rain and do not use power tools in damp or wet locations. Keep the work area well lit. Do not use power tools in the presence of flammable liquids or gases.

• Guard against electric shock. Avoid

body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

• Keep children away. Do not let

visitors touch the tool or extension cord. All visitors should be kept away from work area.

• Store idle tools. When not in use, tools

should be stored in a dry, high or locked place, out of reach of children.

• Do not force the tool. It will do the job

better and more safely at the rate for which it was intended.

Instruction Manual

• Use the right tool. Do not force small

tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not intended: for example, do not use a circular saw to cut tree limbs or logs.

• Dress properly. Do not wear loose

clothing or jewellery as they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Make sure long hair is kept out of the way.

• Use safety glasses. Use a face or

dust mask as well if the cutting operation is dusty.

• Do not abuse the cord. Never carry the

tool by its cord or yank it to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges.

• Secure your work. Use clamps or a vice

to hold your work. It is safer than using your hand and it frees both hands to operate the tool.

• Do not overreach. Keep proper footing

and balance at all times.

• Maintain tools with care. Keep tools

sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged have repaired by an authorised service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and free from oil and grease.

• Disconnect tools. Disconnect when

not in use, before servicing and when changing accessories such as blades, bits and cutters. Pull plug before carrying out any adjustment, servicing or maintenance.

• Remove adjusting keys and wrenches.

Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before switching it on.

• Avoid unintentional starting. Do not

carry a plugged-in tool with a finger on the switch. Ensure the switch is off when plugging in.

• Use outdoor extension cords. When a

tool is used outdoors, use only extension cords intended for outdoor use and so marked.

• Stay alert. Watch what you are doing.

Use common sense. Do not operate when you are tired.

• Connect dust extraction equipment.

If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

• Check damaged parts. Before further use

of the tool, a guard or other part that is damaged should be carefully checked to determine whether it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorised service centre. Do not use the tool if the switch does not turn it on and off.

Warning! The use of any accessory or attachment, other than recommended in this

instruction manual, may present a risk of personal injury.

• Have your tool repaired by a

qualified person.

• This electrical appliance is in accordance

with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise considerable danger to the user may result.

T raining

• Never allow children or persons who are

unfamiliar with this type of machine to use it, nor anyone who has not read this leaflet.

360˚

• Do not allow children, animals or other

persons near your machine when in use

- always keep them at least 6m (20ft) away from the cutting area.

• Remember that the operator/user is

responsible for accidents or hazards

6m/20ft

occurring to other people or their property.

• Your machine is designed for use on AC

(mains) electrical supplies only - do not attempt to use on any other supply .

ENGLISH

• Plug your machine into a power point -

never a lighting socket.

• Never carry your machine by the cable or

jerk the cable to separate the connectors. Keep the cable away from heat sources, oils or sharp edges. Check the condition of your cable before use and do not use if damaged.

• We recommend a first time user should

get informed, practical instruction on how to use a hedgetrimmer, as well as reading this manual.

Preparation

• To protect your feet, always wear stout

shoes or boots.

• Use protective equipment. Wear safety

spectacles or goggles and heavy duty gloves whilst operating your machine.

• Use a face mask if dusty.

• Use ear protection if the sound level seems

uncomfortable when using your machine.

• Protect long hair from contact with

the hedgetrimmer.

• Do not operate your machine barefoot or

in open sandals.

• Do not wear loose jewellery.

• Clothes should be close fitting, but not

restrict your movement.

• The power supply cable should be

regularly inspected for signs of damage or ageing, and only used if in good condition.

• Always keep the power supply cable

away from the blades - be aware of its position at all times.

• Always be sure your machine is in a safe

operating condition.

• Before using your machine, disconnect

it from the electrical supply and visually check that the blade fixings are secure. A damaged blade or loose blade nuts are a major hazard and must be replaced.

• Ensure hedges etc. are free from foreign

objects such as railings or barbed wire which may damage your machine. Avoid dangerous starting, do not carry your hedgetrimmer to the hedge plugged in.

+ 8 hidden pages