Black & Decker FP2700SC Instruction Manual
MODEL/MODÈLE
❍ FP2700SC
12-Cup Food Processor
with 4-Cup Nested Workbowl
Robot cuilinaire de 3 litres
avec bol intégré de 1 litre
Customer Care Line:
USA 1-800-231-9786
Accessories/Parts (USA)
1-800-738-0245
For online customer service
and to register your product, go to
www.prodprotect.com/applica
Service line à la clientèle :
Canada 1-800-231-9786
Accessoires/Pièces (Canada)
1-800-738-0245
Pour accéder au service à la clientèle en
ligne ou pour inscrire votre produit en
ligne, rendez-vous à
www.prodprotect.com/applica
2
3
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
❍ Read all instructions.
❍ To protect against risk of electrical shock do not immerse cord,
plugs or appliance in water or other liquid.
❍ Close supervision is necessary when any appliance is used by or
near children.
❍ Unplug from outlet when not in use, before putting on or taking
off parts and before cleaning.
❍ Avoid contacting moving parts.
❍ Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical
adjustment.
❍ The use of attachments, including canning jars, not
recommended by the manufacturer may cause fire, electric
shock or injury.
❍ Do not use outdoors.
❍ Do not let cord hang over edge of table or counter.
❍ Keep hands and utensils away from moving blades or discs
while processing food to reduce the risk of severe injury to
persons or damage to the food processor. A scraper may be
used, but must be used only when the food processor is not
running.
❍ Blades are sharp. Handle carefully.
❍ To reduce the risk of injury, never place cutting blade or discs
on base without first putting bowl properly in place.
❍ Be certain cover is securely locked in place before operating
appliance.
❍ Never feed food by hand. Always use food pusher.
❍ Do not attempt to defeat the cover interlock mechanism.
ENGLISH
❍ Do not use appliance for other than intended use.
❍ The maximum rated wattage for this product was obtained
with the dough-blade. Other recommended attachments may
draw significantly less power or current.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V Models Only)
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. To reduce the risk of fire or electric
shock, do not attempt to remove the outer cover. There are no userserviceable parts inside. Repair should be done only by authorized service
personnel.
ELECTRICAL CORD
a) A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce the risk resulting from becoming entangled in or
tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available
and may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord
or extension cord should be at least as great as the electrical rating
of the appliance,
2) If the appliance is of the grounded type, the extension cord should
be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or tripped
over.
Note: If the power supply cord is damaged, it should be replaced by qualified
personnel.
4
5
1. Food chute
2. Multifunctional feed chute
† 3. 12-cup workbowl cover
(Part # FP2700-01)
† 4. 12-cup workbowl (Part # FP2700-02)
5. Base
† 6. 4-cup workbowl (Part # FP2700-03)
† 7. Food pusher (Part # FP2700-04)
† 8. Reversible slicing/shredding disc
(Part # FP5050-05)
9. Center post
† 10. Dough blade (Part # FP2700-05)
† 11. Large stainless steel chopping blade
(Part# FP2700-06)
(12-cup workbowl)
(Part # FP2700-07)
† 12. Small stainless steel chopping blade
(4-cup workbowl) (Part # FP2700-08)
† 13. Skid-resistant feet
(Part # FP2700-09)
14. Control panel
Note: † indicates consumer replaceable/
removable parts
ENGLISH
How to Use
This product is for household use only.
GETTING STARTED
• Remove all packing material, and any stickers from the product. Remove and save
literature.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Wash all removable parts as instructed in CARE AND CLEANING section of this
manual. (See directions for inserting and removing the center post with interlocking
safety latch on page 5.)
Caution: Handle chopping blades and slicing/shredding disc very carefully.
They are very sharp.
• Select a level dry countertop where the appliance is to be used allowing air space on
all sides to provide proper ventilation for the motor.
ASSEMBLING YOUR FOOD PROCESSOR AFTER WASHING
Important: Always make sure your food processor is unplugged before starting to
assemble.
INSERTING AND REMOVING CENTER POST WITH INTERLOCKING SAFETY LATCH
This part of the large wokbowl is removable.
1. Place the workbowl on a flat surface with the bowl turned upside down.
2. Hold the workbowl in place by the handle. Grasp the opaque tabs on the white
based center post with interlocking safety latch and rotate the center post
counterclockwise until the lower tabs are free. Lift the post out.
3. To return to its original position, invert the workbowl and place center post into
opening in bottom of workbowl and press down until it rests flat against the bottom
of the workbowl. Turn the tabs clockwise until tabs snap into place.
LOCKING THE WORKBOWL IN POSITION
1. Attach center post to workbowl (as directed above). Place the
workbowl on the base of the food processor with handle turned
to the left of the locking mechanism (
) over the unlock symbol
(
) (A).
2. Hold handle and rotate workbowl counterclockwise toward the lock
signage (
) until it clicks firmly into place.
Note: Be sure to lock the workbowl in place before attaching the blades and cover.
LOCKING THE COVER
1. Place cover over workbowl with the small latch to the left of the
workbowl handle (B).
2. Hold food chute and rotate cover counterclockwise until cover locks
into place.
3. Place the multifunctional feed chute into the food chute on top of
the cover with the small single clear plastic arm facing the handle
on the workbowl. Push down until the feed chute rests at the
bottom of the food chute.
Important: For your protection this appliance has an interlock system.
The processor will not operate unless the cover and multifunctional feed
chute is properly locked in place.
4. Insert the food pusher into the central tube of the wide mouth feed chute. The
pusher is used to guide foods through the multifunctional feed chute and can be
removed when adding liquid or additional foods while the processor is running.
Product may vary slightly from what is illustrated.
A
B
6
7
ENGLISH
5. To use the large food chute place the foods to be processed into the large opening of
the food chute. Place the multifunctional feed chute with the food pusher in place over
the food and guide the food through the chute.
Important: The large food chute is best used with the slicing/shredding disc in place.
CONTROLS
The controls are located on the front of the base. Press
(Off) , (speed) or ((P)) (Pulse)
to select a function. (See directions below.)
(OFF)
• Processor should be stored in
(Off) position and unplugged when not in use.
• Use ((P)) for short processing tasks.
• The ((P)) button must be pressed and held for the appliance to operate. When released
the appliance will stop. Do not use the ((P)) (pulse) button longer than 2 minutes.
• The motor of the processor runs as long as this button is held down. Press the button
down and then release; allow the blades to stop running and the food to fall to the
bottom of the workbowl before pressing again.
• Pulsing gives better control when chopping, mincing, mixing and blending foods.You can
control the size of the foods from coarse to fine.
( )
(SPEED)
•
( ) When this function is selected the processor runs continuously until the button is
pressed.
• This speed is used for blending, dressings, sauces and making batters and doughs.
HOW TO CHOP IN THE LARGE WORKBOWL
Important: The two workbowls are not intended to be used at the same time. Only use
one workbowl at a time.
The chopping blade is used to coarsely or finely chop, mince, mix and puree foods to a
smooth consistency. Use the workbowl to chop fresh and cooked fruits and vegetables,
cooked and raw meats, fish and poultry; to make sauces, dressings and salsas; to make
pastry, cookie and cracker crumbs.
1. Lock workbowl with post with interlocking safety latch in place into position
(see Illustration A).
2. Hold large chopping blade by center shaft and insert onto center post
Note (this side up) on blade attachment (C).
Caution: The blade attachments are very sharp. Use caution when
handling and storing.
3. Place food in workbowl.
4. Place cover on workbowl and lock into place by rotating cover clockwise
(See Illustration B).
5. Place the multifunctional feed chute and food pusher in place in food chute. Never use
your fingers to direct food through chute.
6. Press
or ((P)) button.
Note: Process foods no more than a few seconds at a time. Pulsing produces excellent
results and offers greater control.
7. To add food or liquid while processor is running, remove food pusher and insert through
the multifunctional feed chute. Replace food pusher in chute.
Important: Be sure chopping blade has completely stopped spinning before
removing cover from processor.
8. When finished, press the
button and allow blades to stop revolving before removing
cover. Twist cover to remove.
9. To unlock workbowl, turn it clockwise and lift off base.
Note: Remove workbowl from appliance before removing blade to prevent food from
leaking through the center opening of the workbowl.
10. Carefully remove chopping blade and empty workbowl.
11. Unplug appliance when not in use.
HOW TO CHOP IN THE SMALL WORKBOWL
The small workbowl is perfect for small chopping and blending.
1. With the large bowl in place ( see steps 1 and 2 under HOW TO CHOP IN THE LARGE
WORKBOWL) without the large cutting blade, insert the small bowl onto the center
post fitting the 3 tabs on the outside of the bowl into the notches on the large bowl
that will hold the small bowl firmly in place.
2. Holding the small cutting blade by the white plastic top and keeping
fingers away from the cutting blades, firmly press the blades over
the center post until the lower blade rests on the bottom of the
bowl. (The notches on the center post should match the openings
on the blade handle.) (D).
HELPFUL TIPS FOR CHOPPING AND BLENDING
• The processor works very quickly.
• Watch carefully to avoid over-processing foods.
• The ((P)) button offers the best control and results.
• For best results, process foods that are about the same size.
• Do not overload the bowl.
• Never walk away from the processor while it is on.
• Use hot but never boiling liquids.
• Do not process more than 3 cups liquid in the large workbowl at one time.
• To process meat, use no more than 2 cups of ¾-inch cubes and process using
((P)) in 5-second intervals.
• The large workbowl has a capacity of 18 oz for liquid and 8 cups for dry foods;
the small workbowl can process up to 3 cups..
• Use a funnel inserted into the feed chute when adding ingredients such as, oil,
flour and sugar.
USING THE DOUGH BLADE
This blade makes preparing dough efficient and time saving.
1. This blade does not extend to the outside rim of the workbowl so it cannot
incorporate flour when very small amounts of flour are being processed.
Note: Use the metal blade for pastry and mixtures that contain less 2 cups of flour.
2. Push dough blade down onto center post into workbowl as far as it will go.
Note (this side up) on blade attachment.
3. Insert all the dry ingredients into the workbowl.
4. Place cover on workbowl. Add multi-functional food chute and food pusher. Process
to blend using the
or ((P)) button.
5. With appliance running, add ingredients through the small food chute
6. When finished, press the
button and allow blades to stop revolving before
removing cover. Twist cover to remove.
7. To unlock workbowl, turn it clockwise and lift off base.
Note: Remove workbowl from appliance before removing blade to prevent food from
leaking through the center opening of the workbowl.
8. Carefully remove chopping blade and empty workbowl.
9. Unplug appliance when not in use.
C
D
Loading...